Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dispenser inlet connection broken
1 Pull the machine away from the wall. 2 Unplug the machine. 3 Remove three screws in the back on the machine that secure the top 4 Remove the top 5 Remove the water lines that are connected to dispenser 6 Remove the Detergent tray 7 Remove one 1/4-inch screw that secures dispenser to the washer brace 8
... Read moreRemove two torques tip screws from the front of the dispenser 9 Remove the outer ring securing the washer seal 10 Disconnect the rub hose connected at the front of the dispenser at the bottom 11 Reinstall the New Dispenser in reverse order 12 Test for leaks
Read less
David from Wichita Falls, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jennifer
April 1, 2018
I need the diagram parts numbered 8, 9, 10, and 13 from the diagram. Does the replacement dispenser contain all of these?
For model number MHW3505FW0
Hello Jennifer,
Thanks for your question. The dispenser contains 8, 9, and 10, but the handle (diagram part 13) is sold separately under part number PS12347920.
I hope this helps.
Hi Joanne, thank you for your question. Yes, this is the part that you are looking for according to your manufacturer and the model number provided. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Byron
January 29, 2018
I need just the top of water dispenser where the hoses go in, number on it is w10419683
For model number MHW4300DW0
Hi Byron,
Thank you for your question. The part that the hoses attach to is the water inlet valve. The part number listed for the water inlet valve under your model number is PS11754698. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Millie
January 14, 2018
What is the difference between drawer part 9 and drawer part 11? In my washer, it is the tabs that hold the drawer to the cover that have broken. Therefore, when i pull it out only the front cover comes out.
For model number MHW5100DW0
Hello Millie, Thank you for your inquiry. 9 is the entire detergent drawer assembly and 11 is the drawer divider. Hope this helps!
