This part is the replacement door hinge cable for your dishwasher. The door hinge cable connects the door spring to the door hinge, and allows the door to drop down slowly when it is opened. If you open your dishwasher and the door drops down quickly, your door hinge cable may need to be replaced. Be sure to disconnect the water and power sources from the dishwasher before you begin this repair. The door hinge cable is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD01X10569 replaces these:
AP5670562
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
4.7
Filter By Rating:
5 Stars
4
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Frank B - October 21, 2020
Verified Purchase
Part was an exact match
The part order was an exact match. The shipping was very fast. Great place to get parts from.
★★★★★
★★★★★
Gail S - May 14, 2020
Verified Purchase
FIT PERFECT
I ordered 2 cables, and they arrived quickly. Easy as pie to install, took only a few minutes and works perfect.
★★★★★
★★★★★
R. BRANDON B - May 22, 2019
Verified Purchase
Part worked
I had multiples repairs needed to save my dishwasher and this part was one of them. All parts worked great and were shipped fast.
★★★★★
★★★★★
Frank L S - March 4, 2019
Verified Purchase
Dishwasher Part Replavement
The part (door cable) went on the spring easily and connected to the door within some effort. It is a quality part.
★★★★★
★★★★★
Ronald S - June 26, 2018
Verified Purchase
Dam perfect
This was the easiest dishwasher repair ever. Perfect part ,easy to install. Works great. And fast service.
★★★★★
★★★★★
Michael Z - May 12, 2018
Verified Purchase
Did not need
Pulled out unit. Cable just came off .
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
REPLACE DOOR CABLE
Removed the top two screws that hold the dishwasher to the cabinet , remove the two screws on the bottom panel and remove the panel. Screw the levelers all of the way up and pull out the dishwasher about 6 to 8 inch. Hook the new cabe on the spring and pull around pulley and attach it to the door bracket. I replaced both cables. Reverse
... Read moreto complete.
Read less
Lonnie from YUKON, OK
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cable had come off of roller
First went to U Tube to view installation instructions and location of part. It was fairly easy to replace since I had installed the unit. I was able to move the unit out enough without disconnecting any line since there was enough slack in all three connections, only shut the power off. I did use the new parts even though the older ones
... Read morewere not broken. The nylon pulley wheel had built up with lint causing the cable to come off.
Unscrew the upper and side holding screws. Move dishwasher part way out. I didn't need to disconnect the water or electric. Make sure the electricity is off. Remember your working around water. Take off the bottom plat removing two screws, Remove broken cable pulley and replace new. Buy two since your their you might want to replace
... Read more both. Have fun! It's duck soup.
Read less
William from CASTLE ROCK, CO
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joanna
March 7, 2018
How many cables are in this dishwasher? One is broken, how many should i order?
For model number GDF620HGJ4WW
Hello Joanna, thank you for your question. There are two door cables on the unit, one on each side of the door. You will want to order quantity 2 of part number WD01X10569 Door Cable and replace both of them, even if only one is broken. Usually, if one goes the other is not far behind. Good luck with your repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
John
April 24, 2019
The door to my dishwasher drops quickly and want to know which part to buy to fix it. Is there a video on replacing this part?
For model number PDT720SSH6SS
Hello John, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS7320283. There are two door cables on the unit, one on each side of the door. You will want to order quantity 2 of the Door Cable and replace both of them. Here is a link for a video that may help. Good luck with the repair!
https://www.youtube.com/watch?v=X02l3pHeOUI
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
January 22, 2018
Is this door cable in metal?
Hello Tom,
Thanks for your question. We show the eyelet for this piece is plastic, and attached to a non-metal flexible cable.
I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Adam
November 11, 2021
Will the PS7320283 stop the machine display from lighting up?
For model number GDF520PSJ2SS
Hello Adam, Thank you for the question. The Door Cable prevents the door from falling to the floor when opening the door. There is nothing electrical to this cable. If there is power going to the appliance but the display is not powering on, we suggest replacing the User Control and Display Board. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello, can you tell me exactly which door cable I need for this appliance? I am missing both.
Thank you.
For model number GDT630PYR3FS
Hi Mark, thank you for contacting us. According to our research, the part that you are looking for is the pulley cable, part number PS16659469. We hope this information helps!
