Install videos!
731582-1-M-Whirlpool-8193741 -Dishrack Adjuster Housing
Part Location Diagram of 8193741 Whirlpool Dishrack Adjuster Housing
See part 2 in the diagram
Replacing your KitchenAid Dishwasher Dishrack Adjuster Housing
( Grid squares measure 1x1 inch )
731582-1-S-Whirlpool-8193741 -Dishrack Adjuster Housing 731582-2-S-Whirlpool-8193741 -Dishrack Adjuster Housing Part Location Diagram of 8193741 Whirlpool Dishrack Adjuster Housing Replacing your KitchenAid Dishwasher Dishrack Adjuster Housing
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Dishrack Adjuster Housing 8193741

★★★★★
★★★★★
1 Review

Rated by 13 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 56.84
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS731582
Manufacturer Part Number 8193741
Manufactured by Whirlpool
Product Description

Dishrack Adjuster Housing Specifications

This housing comes in two pieces, and with two screws.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your KitchenAid Dishwasher Dishrack Adjuster Housing

Replacing your KitchenAid Dishwasher Dishrack Adjuster Housing
Back to Top
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Kenmore, Whirlpool.
Part# 8193741 replaces these:
AP3140615, 939843, 8193694, 8193741, 8268735, 8268736, 8531344, 8531346
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michelle L - February 9, 2018
  Verified Purchase
Very easy repair
Part came in in 2 days, very easy to repair
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 13 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher adjust housing broken.
I'm not a very handy guy and normally don't do repairs. However I felt I could handle this one. I just removed the broken housing, looked the part up on partselect.com. Three days later I received the part and had the new one put on in about 20 min. The only disappointing thing was that the part required a star type end screw driver and lucky I had one or I would not have been happy.
Read less
  • Jeff from West Jordan, UT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original Dishrack adjuster was broken on left side
Slight challenge removing old housing...once that was removed I was able to clean the area and slide the new pieces into place and secure with screws that were provided.
Parts arrived within 24 hours of ordering replacement! It was a terrific experience.!
  • kathy from holden, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original part cracked
The repair was very easy. Just removed the old part and put the new part in with two screws instead of the snap together plastic part. The two screws that came with the part had hex or star heads. I couldn't find my hex head set but a small phillips head did the job.
I would use this company again. Fair price. Fast shipping.
  • James from Grant Park, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher Upper Rack Fallen One Side
Popped the old housing apart with screw driver, saving internal part, installed part into new housing, placed in posistion, installed two new screws and it worked like charmed. So simple, I have ordered 2nd part to replace opposite side which is not yet broken. Thanks to the terrific phone assistant who convinced me it would work and not have to replace the entire rack which was suggested by a repair man. . . . . . Many thanks! ! ! !
Read less
  • Gordon from Lynchburg, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic parts broke when applied pressure to top dish rack
Family member used rack as support when loading dishes in the rack. The plastic parts broke. Ordered the replacement parts and was easy fix, BUT you will need Torx 15 tool to get it done. So sad they used this screw to fix the dishwasher - would have been so much easier to use a normal Philips head screw. Add about $7.00 for the tool to complete the work, but very easy....
Read less
  • Walter from Issaquah, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishrack adjuster housing snapped & broke when I caught the rack on somthing when pulling open.
It's very easy to repair. You put the new parts back in the same way as you took the broken parts out. You receive 2 screws instead of the orginal push in clips that hold the parts together. The screws are very easy to put in but you will need a Torx head screw driver.
  • Jolene from Constableville, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Primary problem door dropped open
I first replaced the door balance kit. I had to unhook the water supply to pull the unit out. I replaced the door balance kit first. The pieces were slightly different than my old parts, but fairly easy to figure out. Also, the spring was off on one side so had to confirm where to reconnect it. That took about 30 minutes. I then took out the racks and installed the chopper. The old one came out easily, but it took about 20 minutes to seat the new chopper properly and then reassemble the lower arm. This part of the repair was about another 30 minutes total. Lastly, I replaced the upper rack adjusters, which had broken a while ago and I had pulled together with nylon straps. The new adjusters have metal screws which should be more durable than the plastic clips used in the original equipment. This part of the job took about another 20 minutes, but was easy to complete. The dishwasher door works like new and the top rack is easier to load with the adjusters working properly again.
Read less
Other Parts Used:
Door Balance Link Kit Dishrack Adjuster Housing Dishwasher Chopper Assembly Spray Arm Seal
  • Daniel from River Falls, WI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Wrench set
2 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
top dishrack adjuster pins broke that holds the two main pieces together
I first had to remove the existing adjuster from the rack that was still attached. Once removed it was just a matter of sliding on the new part. The second piece of the adjuster which holds the adjuster to the rack was then screwed on to the first piece with supplied screws. I didn't think that the supplied star shaped screws were necessary. Why not just a philips?? I did have a little trouble getting the rack extended out far enough to clear the dishwasher in order to screw in the back screw of the adjuster.
Read less
  • Mark from Portland, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Borken upper dishrack height adjuster on one side.
Took off what was left of the old one and put the new one on using the old intact adjuster lever part (goes inside the adjuster). With this part the push fit snap pins are not required because there are screws provided with the part. The screws are star-drive. I have a driver kit that has star-drive bits, or I would have been mad. The drive type should be mentioned in the description for the part (unless I missed it), and also it should mention that the press-fit pins are not required.
Read less
  • Robert from Monument, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper Rack couldn't be raised - stuck in low position
Pry the inner and outer pieces of the old adjuster apart, setting the lever part aside and noting how it fits between the two pieces. Put the lever into the larger of the new adjuster pieces and hold the rack at the right height so the two new pieces can snap together tightly around the rack. Then simply drive the screws in with a screwdriver. It would be easier to have another person hold the pieces together while you drive in the screws.
Read less
  • Jon from San Rafael, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Push-In Retainer Clip
$39.04
$39.04
  In Stock
Adjuster Actuator - Left Side
$3.29
$3.29
  Special Order
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS731582
Manufacturer Part Number: 8193741
Brand
Model Number
Description
Kenmore
66513752K600
Dishwasher
Kenmore
66513752K601
Dishwasher
Kenmore
66513752K602
Dishwasher
Kenmore
66513752K603
Dishwasher
Kenmore
66513753K600
Dishwasher
Kenmore
66513753K601
Dishwasher
Kenmore
66513753K602
Dishwasher
Kenmore
66513753K603
Dishwasher
Kenmore
66513754K600
Dishwasher
Kenmore
66513754K601
Dishwasher
Kenmore
66513754K602
Dishwasher
Kenmore
66513754K603
Dishwasher
Kenmore
66513759K600
Dishwasher
Kenmore
66513759K601
Dishwasher
Kenmore
66513759K602
Dishwasher
Kenmore
66513759K603
Dishwasher
Kenmore
66513762K600
Dishwasher
Kenmore
66513762K601
Dishwasher
Kenmore
66513762K602
Dishwasher
Kenmore
66513762K603
Dishwasher
Kenmore
66513763K600
Dishwasher
Kenmore
66513763K601
Dishwasher
Kenmore
66513763K602
Dishwasher
Kenmore
66513763K603
Dishwasher
Kenmore
66513764K600
Dishwasher
Kenmore
66513764K601
Dishwasher
Kenmore
66513764K602
Dishwasher
Kenmore
66513764K603
Dishwasher
Kenmore
66513769K600
Dishwasher
Kenmore
66513769K601
Dishwasher
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Dishrack Adjuster Housing
$ 56.84
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.