Used in conjunction with the timer dial knob assembly.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH02X10093 replaces these:
AP3669691, 947891, WH2X10093
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gerald
December 17, 2017
Timer works but when knob is depressed all the way, does not turn the dial. The only way to select the type of wash is by turning manually the dial... what could be broken and need replacement? dial with compression ring? timer knob? compression ring?
For model number GTWP1800D0WW
Hi Gerald,
Thank you for your question. You would need to check your knob and your dial. It sounds like one or both of those parts are broken. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dennis
December 31, 2017
Where does the compression ring go? Dial stuck on spin mach doesn't run, does the dial advance as it goes thru a wash? Thank you
For model number WHDSR209DAWW
Hello Dennis, Thank you for your inquiry. Yes, the dial is supposed to advance as it goes through a wash, the compression right goes right behind the dial on the timer shaft. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Trisha
March 21, 2019
My selector knob just spins and doesn't engage. Machine works fine, but have to turn the timer dial by hand. I have replaced the selector knob and clip but still won't engage and just spins. Does the compression ring have anything to do with this and should i replace it?
For model number HTWP1000MOWW
Hello Trisha, thank you for your question. The compression ring is necessary for the knob to work correctly. However, if you are having to manually turn the timer dial by hand to move through the cycles and the timer is not advancing on its own, the timer itself would be replaced. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Billy
May 9, 2019
The control knob that changes the settings and pull to start has broken
It appears the lock plastic is ok but knob has plastic stem that fits in behind the lock
Parts looked like 7 or 8
Could parts or services call me
904-671-2667
For model number Hswp1000m4ww9
Hello Billy, thank you for inquiring. The Knob is sold in three parts, the Timer Knob part PS1482290, the Control Knob Dial part PS1482361, and the Compression Ring part PS652828. The stem you are referring to is a part of the Timer part PS11701146. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bobbie
May 3, 2019
How do i install the compression ring
For model number GLWN2800D2WS
Hello Bobbie, Thank you for the question. You just need to slip the ring onto the switch shaft before installing the knob. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
knob and timer di not work
remove back screws to control panel. unplug timer. pull bad timer out. snap new timer in plug in connector. reattach screws to control panel. put knob on timer
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tim C - April 2, 2018
Verified Purchase
Tech support not good
Called told what washer was doing they said I needed this part...who ever was on phone would put me on hold and talk to a tech I guess explaining...I should have personally talked to tech instead of going back and fourth..from her to them..waist of time waist of money..I don’t recommend..the person relaying trouble to tech....
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
