Vent Grille WB07X10530

I used a Phillips screwdriver to remove the two screws holding the vent grille in place. I installed the new vent grille and inserted the two screws and tightened the vent. A quick fix to replace the vent grille.

Extremely easy! Unplugged the microwave, unscrewed the grill and removed. Took out the old charcoal filter and slid the new one in. Put in the new grill, screwed it in. All done! Less than 10 minutes time.

The replacement vent was a little tricky to line up and fit properly. After getting the grill in place I realized that only one of the two screws would work. The predilection hole on the vents left side was too big and the screw would not hold the vent. I have it up with just the one screw for now. It was such a pain to get in place I did ... Read more n't have the patience to take it off.

Ordered new unit (should have been gloss black), removed screws, unpackaged new unit, installed unit with care, all plastic parts inserted into holes, screwed unit to microwave.

All I did was remove the broken grill and replaced with the new grill. It took a screwdriver and two screws. It looks 100% better.

Thank you

I just simply took out the two screws that were holding the grille in place and placed the new grille the tightened up the screws.

It couldn't have been easier...two screws out, two screws in. Thanks to PartSelect the grille was available and they delivered it quickly. This saved me hundreds of dollars to buy and have a new built-in microwave installed.

removed grill to replace charcoal filter and noticed that the grill was broken.had to buy a new grill to replace broken one.
new grill is flat black instead of shinney black but thats what happens when you buy with ge numbers. thanks

I removed the two screws that were still attached to the microwave. With the new grill, I replaced the screws and the problem was resolved.

I lined up the new grille's tabs on the microwave's
holes, carefully pushed it into place, secured it with the two small screws I had saved and badda bing, badda boom, done and done. Perfect fit, looks great. Couldn't have been easier. Thanks.
GE wanted over a hundred dollars for the same part.