Part Location Diagram of WB06X10420 GE Turntable Coupler
See part 40 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Turntable Coupler WB06X10420

 Fits your 36362702200!
★★★★★
★★★★★
28 Reviews

Rated by 25 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 19.92
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 36362702200!
PartSelect Number PS651211
Manufacturer Part Number WB06X10420
Manufactured by GE
Product Description

Turntable Coupler Specifications

This turntable motor coupler connects the turntable motor to the turntable tray to activate the tray. If your tray does not consistently turn or does not turn at all, replace this part. This part measures 1 1/2" in diameter. Remember to unplug your microwave from the power source as a safety precaution. Refer to the openers manual provided by the manufacturer for further installation instructions and accurate guidance.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Tray won’t turn | Won’t turn on
This part works with the following products:
Microwave.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB06X10420 replaces these:
AP3416049, 942560, WB6X10420
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
28 Reviews
4.8
Filter By Rating:
  • 5 Stars
    23
  • 4 Stars
    4
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 25 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Turn table stopped rotating.
I tried to install the new part several times, but it didn't work. So I used a pencil to move things around down the shaft. After that the new part went in and now my microwave is doing what I need it to do.
  • Michael from FISHERS, IN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My turntable quit working
I replaced the turntable motor and coupler. It did not fix the problem. Not sure where to go from here. Looks like the next step involves parts that are as expensive as a new microwave.
Other Parts Used:
Turntable Motor Turntable Coupler
  • James from WICHITA, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Because the turntable coupler was broken, the turntable wouldn't rotate.
I simply removed the broken coupler and snapped the replacement part into place, being careful to line up the slot on the new coupler. Just a note: the troubleshooter guide on the website was a great help in determining how to fix the problem. The comment section let me know this a simple fix anyone could do.
  • Michael from SEVIERVILLE, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
turntable coupler broken
had someone else do it...he advised very easy to accomplish.
  • Judith from Clements, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace turntable coupler on microwave
Piece did not fit as well as old piece needed to take off a small piece to make it fit. Once it was in the turntable worked again
  • Patricia from Smithtown, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Coupler broke at shaft & motor seized
Removed 5 philip head screws from under panel. Under panel droped down exposing drive motor. Removed one drive motor screw, replaced with new motor at the same time lining up new coupler. Pressed together, reinstalled motor srew, attached wire coupling and tested. Worked fine. Reinstalled lower panel screws (5)and unit was ready to go. I ordered two of each units because I believe this to be weak link in the unit. It was only 2 years old, used little as I have another home. I recently installed a like unit (Hanging) and it was a breez. 4 srews properly placed, electrical cord hole properly drilled & ready to go in 45 minutes.
  • Joseph from Columbia, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Turntable coupler broken, and would not turn
When I received the part, I popped it in and POW, problem solved. I praise PartSelect, they offered my part at a fantastic price compared to other vendors and shipping time was very good! will use them again when I have the need.
  • Stephen from League City, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My Turntable Coupler was broken
I took the glass table up and underneath was the turntable coupler. I reached in with my hands and gently pulled the old coupler out. Once out I lined up the new one and gently pushed it in the hole until it locked into place. The process took about 5 minutes to complete. Very easy to install.
  • Teresa from Fredericksburg, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken turntable coupler
Pulled off old coupler.It was tight so used a trim bar to remove. Checked motor shaft since there was 2 types available.One, square shaft,other D shaft. Ordered in AM and received the next day in PM by Fedex.. Can`t get much better than that! Pushed on and done......Like new again...
  • CARL from CAMBRIDGE CITY, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old turntable coupler caught fire and burnt up
Replaced part with minimum effort.
  • Arun from Annarbor, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
November 30, 2017
I need the turntable coupler part jvm1630otr8. Apparently this part isn't available since I can't find it anywhere.What is the replacement model for the coupler I need to get that will fit this Hotpoint?
For model number RVM1625SJ01
PartSelect logo
Hello John, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS227859. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Buzz
June 24, 2019
Can you tell me the size of the screw that holds the turntable motor in place. Misplaced.
For model number jvm1650sh05
PartSelect logo
Hello Buzz, Thank you for the question. Very sorry but we do not have the dimensions for this screw. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Larry
March 8, 2023
How to remove and replace this turntable coupler
For model number JVM1650WH01
PartSelect logo
Hi Larry, thank you for reaching out. Firstly, unplug the appliance power cord. Then open the oven door to access the glass tray. Just remove the glass tray, and pull the turntable coupler straight upward. Now install a new turntable coupler, align it with a motor shaft, and position the glass tray on the coupler. We hope this information helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Larry
March 9, 2023
How do you replace the Drive Motor for this model ?
For model number JVM1650wh01
PartSelect logo
Hi Larry, thank you for reaching out. We would recommend following these general instructions to replace the drive motor, part number PS237772: First, turn off the power supply to the unit. Remove all the screws securing the bottom panel and lower it. Disconnect the wire harness from the drive motor, and then remove the mounting screws. Rotate the motor clockwise to detach it. To install the new motor, insert the motor shaft into the drive coupler. Rotate the motor anti-clockwise, and insert the mounting screw. Reconnect the harness wire to the drive motor and put the bottom panel back on. We hope this information is useful!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS651211
Manufacturer Part Number: WB06X10420
Brand
Model Number
Description
Kenmore
36362702200
Microwave
Kenmore
36362709200
Microwave
Kenmore
36362709300
Microwave
General Electric
EMO3000CBB04
Microwave - Counter Top
General Electric
EMO3000CCC04
Microwave - Counter Top
General Electric
EMO3000CSS04
Microwave - Counter Top
General Electric
EMO3000CWW04
Microwave - Counter Top
General Electric
EMO3000HBB01
Microwave - Counter Top
General Electric
EMO3000HBB02
Microwave - Counter Top
General Electric
EMO3000HBB03
Microwave - Counter Top
General Electric
EMO3000HBB04
Microwave - Counter Top
General Electric
EMO3000HBB05
Microwave - Counter Top
General Electric
EMO3000HCC01
Microwave - Counter Top
General Electric
EMO3000HCC02
Microwave - Counter Top
General Electric
EMO3000HCC03
Microwave - Counter Top
General Electric
EMO3000HCC04
Microwave - Counter Top
General Electric
EMO3000HCC05
Microwave - Counter Top
General Electric
EMO3000HSS01
Microwave - Counter Top
General Electric
EMO3000HSS02
Microwave - Counter Top
General Electric
EMO3000HSS03
Microwave - Counter Top
General Electric
EMO3000HSS04
Microwave - Counter Top
General Electric
EMO3000HSS05
Microwave - Counter Top
General Electric
EMO3000HWW01
Microwave - Counter Top
General Electric
EMO3000HWW02
Microwave - Counter Top
General Electric
EMO3000HWW03
Microwave - Counter Top
General Electric
EMO3000HWW04
Microwave - Counter Top
General Electric
EMO3000HWW05
Microwave - Counter Top
General Electric
EVM1750DM2BB
Microwave
General Electric
EVM1750DM2CC
Microwave
General Electric
EVM1750DM2WW
Microwave
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service