This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Drive Hub Kit
Troubleshooting
This part fixes the following symptoms:
Will not agitate | Spins slowly | Spinning Issues | Shaking and Moving
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag, Kenmore, Amana.
Part# W10528947 replaces these:
AP5665171, W10396887, W10528947VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
25 Reviews
4.6
Filter By Rating:
5 Stars
19
4 Stars
4
3 Stars
1
2 Stars
0
1 Star
1
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Carl H - October 8, 2023
Verified Purchase
Repair was easy!
Clip that holds Drive Hub brake after a week. New hub striped and drum not spinning.
★★★★★
★★★★★
Henry B - April 9, 2023
Verified Purchase
Easy repair
Fit exactly like it was supposed to. Had it all back together in about 10 minutes
★★★★★
★★★★★
Pamela Q - April 27, 2022
Verified Purchase
part was exactly as ordered
Repaired washer and working great!
★★★★★
★★★★★
David R - April 21, 2022
Verified Purchase
Repair went well!
The part was a perfect fit!
★★★★★
★★★★★
John Y - February 9, 2022
Verified Purchase
Maintenance
I repaired my hub .it went out after six years.
★★★★★
★★★★★
Nelson V - January 22, 2022
Verified Purchase
Washer not spinning clothes
Perfect fix. Website, video, troubleshooting guide was amazing. Thank you guys for being an amazing help. A friend of mine’s washer broke down at the same time, by the time that the service person came out to fix it I already had my part and my washer was working. Also it was way cheaper.
★★★★★
★★★★★
Linda S - October 13, 2021
Verified Purchase
Worked Great
The website led me right to the part that was needed. Easy to install once we got the old part out. Works great.
★★★★★
★★★★★
Brent B - September 23, 2021
Verified Purchase
Great part
Part worked well and arrived quickly.
★★★★★
★★★★★
William S - August 14, 2021
Verified Purchase
Easy fix
This is the second one of these I bought in two years. The problem is that the splines on the hub are plastic and they wear away in no time.
★★★★★
★★★★★
KAREN S - July 12, 2021
Verified Purchase
Works great!
Great service and very fast delivery! The part was easy to install and it took less than 15 minutes to complete. My washer works great! I haven’t had any issues and it’s been about 4 months since I installed it.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 14 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Slow Spin Cycle with Fast/Normal Agitator
My spin cycle was running, but spinning slowly and not drying my clothes. The agitator spun quickly like normal, but the basket did not spin fast. It seemed like something was slipping. I checked the belt, but it seemed fine and it was less than a year old. I was afraid that the transmission was going, but there wasn't any grinding sound
... Read moreof gears. Luckily the hub part description said that this could fix the slow Spin cycle. Over all the repair was easy, but pulling the agitator off was very difficult. I've got a strong grip and patience and after about 10 - 15 mintues of yanking on the agitator it came off. Don't try to use pliers as it will damage the plastic agitator. Replacing the hub drive and reassembly went very smoothly. The old hub drive wore out because it is plastic and connects to the metal drive shaft from the transmission. After years of torque, the hub will eventually strip out. Sooner depending on your usage and heavy duty cycles. In case you don't know, your machine might have the service manual in it on the inside of the body taped to the side. Mine helped me run through some troubleshooting steps and component tests to pinpoint to problem. Thanks Parts Select!
Read less
Michael from AURORA, CO
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washing machine tub wouldn't spin dry. I could hear some grinding when it was supposed to start spinning.
I knew the hub was probably the issue. I also knew it could be difficult to remove the wash plate, as I tried to do it before on another model a few years ago. When I took out the wash plate bolt, and made the decision to carefully smash the wash plate with a hammer and remove it piece by piece, it was very simple to get to the hub and
... Read moreremove it with a screwdriver. The new wash plate and hub took about 10 minutes to put back in.
Washing machine would not spin clothes, little to no agitation
Our 5 year old Kenmore washing machine broke. The first symptom was that the clothes would come out completely wet. This was due to no spin cycle. The second symptom was that the washing machine had little to no agitation. The lid still locked shut, there was no odor, and you could hear the machine running.
In the event a machi
... Read morene does not agitate or spin, the diagnostics on this website will lead you to believe that drive hub assembly or shift actuator is the problem. The drive hub assembly is by far the more common repair (the pieces are made of plastic and are designed to wear out). If you are torn, go with the drive hub kit repair. That's what it was.
There were some surprises after carefully watching the how to video. First, the agitator in my machine was very tall and required a socket wrench extension to reach the drive hub nut. This will require two sets of hands. Second, the drive hub nut was stuck to the point where I nearly gave up. WD-40 and degreaser did not work to loosen. I ended up pouring a half teaspoon of powdered soap onto the stuck nut to get more grip on the nut. This, along with two sets of hands, got it loose. Third, calibrating machine was barely touched on in the video but this is extremely difficult, the instructions that come with the part were insufficient, and the videos on the internet are not that good. In the end, I'm not sure that the machine ever calibrated. In essence, the machine is re-calibrated by turning the switch in a specific sequence of right to left. Lights are then supposed to flash. This never did anything. I ended up opening and shutting the lid 10 times in 10 seconds as this was allegedly a way to recalibrate.
Note: 2018 and later washing machines suck because of California and the federal government rules and pressure to make them "green". Well, they don't work that well anymore as a result. Keep this in mind when you vote.
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator would not spin, causing when tried to shift into high speed spin. It would cause tub to go out of balance.
First had to take the top of the agitator off to expose the bolt down at the bottom of the agitator. Take a ratchet with 2 1/2 extensions to get bolt off had problems so I had to use impact gun. pull agitator straight up, was stuck a little bit, but once she giving her a few tugs, it popped off the hub. On top of the hub, there is a keywa
... Read morey. Use a straight screwdriver and tap it out sideways. Then remove six Phillips screws and the hub pulls out. Clean the splines really good before you put new hub in. Slide new hub in put six screws in. Tighten them down evenly. Put new keyway back in slide agitator back onto shaft. Bolt on,tighten down Bolt, put top agitator back on. Replacing shift actuator tilt washer up so you can get to the bottom side take a nut driver. There’s two screws on the shield remove them that exposes the shift actuator on the side of the transmission. Remove the harness there’s a clip you push and pull straight out and there’s two screws I believe they’re Phillips And it pulls straight down put new one up in there put the two screws back in make sure the plastic tab on the shift actuator went into the tab of the transmission replaced the wire harness, push it back in make sure it snaps in put shield back on,the two screws in,and you are ready. Once you have those parts back on, you have to reset the washer instructions in your manual. It tells you how to do it. you have to do this or your washer will not work properly.
Remove the center cover with a screwdriver then loosen the 7/16 bolt with an impact driver socket ccw to remove completely biggest issue is removing bottom cover tried pick tools only thing that was succesful was some dawn dishsoap on the center bolt area to loosen enough to lift up the cover replace the hub part that had worn spline groo
... Read moreves remember to use blue loctite on the 7/16 bolt before re-installing cw to tighten bolt
Read less
Craig from CRARY, ND
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
During the Spin cycle the washer was noisy and moved around
I watched the video and did exactly what they said to do. It was really easy. The key to the success was in the parts that were mailed to me it had a separate piece of paper telling you to "reset" the washer after doing the repair. I missed this when I watched the video. That was a critical part of the repair which required no
... Read more tools to accomplish. I have done 6 loads of wash and the washer has not made any crazy noises and hasn't moved!
Read less
JOHN from HERNANDO, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no spin
reviewed video of repair and repaired now washer works as it should . thank you
Earl from BARRYTON, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
violent basket wobble
remove basket and replace drive hub kit
Keith from DUNBARTON, NH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wash plate spinning. Clothes not spun out.
Royal pain getting the wash plate off. I'm 6 foot 215 lbs with muscular arms( beer belly too) and I could not get it to come off. Put hay bail twine around the edge and pulled up so hard the entire machine came off the ground. Luckily I am married. Yep I pulled one end of the string and her the other and it flew off. Part select was $10 c
... Read moreheaper than whirlpool and was a perfect match. I might order another to have because like stated earlier I'm married. She is married to me and the washer and dryer.
Read less
Gregory from GREENFILD TWP, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
51 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Annette
October 30, 2017
Does part 8 come with part 9 or do you have to order separately?
For model number mvwc555dwo
Hi Annette, Thank you for the question. When you order #8 PartSelect Number PS601209 Hub you will be shipped both Item #8 and #9, The Hub and Washer Drive Hub Retainer.Hope this helps!
33 people found this helpful.
Was this helpful?
Thank you for voting!
John
October 18, 2019
This part wears out every two to three months it is not because of overloading it is because of a bad design. The washer says it is heavy duty then why would you put a cheap part made of plastic on it! This part should be made of metal! My opinion Kenmore should recall the part and make a metal replacement part!!
For model number W10528947
Hello John, Thank you for contacting PartSelect. We believe this is a concern best addressed by the manufacturer. We are a parts distributor. We do not manufacture any units, parts, authorize substitutes, or fulfill warranty claims. Please contact your unit's manufacturer, directly.Hope this helps!
23 people found this helpful.
Was this helpful?
Thank you for voting!
LP
March 28, 2018
Is the replacement hub #8 made of metal or plastic?
For model number MVWX655DWO
Hello LP, thank you for your question. The part number HUB W10528947 is made of plastic. Good luck with your repair!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Heather
January 31, 2019
I replaced the screw that holds the wash plate a few months ago. Now the plate spins freely and the machine wont agitate properly...will the drive hub kit fix the problem or do i need a new wash plate? (the screw is tight)
For model number WTW5000DW0
Hi Heather,
Thank you for your question. If the washplate is spinning freely and the screw is tightly in place, it may be stripped. This usually occurs if the the washer is constantly overloaded. You will likely need a new washplate. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Chuck
September 13, 2017
Will replacing the hub quiet down the noisy spin cycle?
For model number WTW4950XW3
Hi Chuck,
Thank you for your inquiry. There are a couple of parts that could cause your machine to be noisy during the spin cycle. You may want to check your clutch assembly, belt, and your suspension rods. These parts can wear and tear over time and may be the cause of the noise. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Lori Strickland
January 9, 2019
My wash tub in the middle of machine is spinning so fast and throwing the clothes all around so it’s off balance. Will this fix the problem?? everything else seems to work well it is only 1 1/2 years old
For model number MVWX655DW1
Hello Lori, thank you for your question. We would recommend replacing the Drive Splutch Kit.part number W10721967, belt part number WPW10006384 and actuator part number W10913953 first. An issue with the hub kit is usually noise, or grinding or the tub doesn't spin during the spin cycle. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Jeanne
August 22, 2019
Not spinning out the water completely. Towels still very wet!
For model number MVWC4258W1
Hello Jeanne, Thank you for the question. I suggest checking the driver belt PartSelect Number PS11747978 to see if it has wear and has stretched out. If there is wear it may not be able to grip and spin fast enough on bigger loads. Hope this helps!
The machine wont spin, installed a new gear case (old one was striped at top and the hub was also stripped out. order new up hub did install new gear case. once new hub is installed should this be good to go or am i missing something else?
For model number mvwx655dw1
Hello David, Thank you for the question. If it is just the hub and gearcase that was damaged, this kit should fix the issue. When you order #8 PartSelect Number PS601209 Hub you will be shipped both Item #8 and #9, The Hub and Washer Drive Hub Retainer.Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
January 16, 2018
Will the basket having a little free play cause the washer to get out of balance? I am having a problem with it getting out of balance on the fast spin cycle then switching to a slower speed spin. I have replaced the spluch and belt. My only guess now is to replace the hub and retainer and/or the suspension top pivots.
For model number 110.25132410
Hi Mike,
Thank you for your question. If the washer is still out of balance and you have replaced the clutch and the belt, you will need to check the suspension rods and the suspension rod supports.
I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Lyn
August 6, 2018
The washer agitates but the drum doesn't turn during washing and spin, just agitater
For model number Mvwx655dw1
Hello Lyn, thank you for your question. There are a few parts we would recommend you check. The Drive belt, clutch, hub and actuator. Here is a like to these parts. I hope this helps!
https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=MVWX655DW1&mfgModelNum=&fkMfgID=1&ModelMasterID=868794&PID=26
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
