Hello Romeo, Thank you for contacting us. Sadly, the part you are requesting we do not have listed. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps.
Was this helpful?
Thank you for voting!
February 2, 2023
Does the drain hose have a check valve. I have dirty water coming in after cycle.
For model number cdt765ssf1ss
Hello Gregory, We are glad you asked! Your Unit has a Turbidity Sensor PS7783361. Turbidity sensors are a piece of equipment used to measure the cloudiness or haziness and the concentration of total dissolved/suspended solids of a solution. Also, the drain hose does not have the check valve and that would be likely part the pump motor which is PS11762952. Thank you and have a great day.
Replacing your General Electric Dishwasher DRAIN TUBE Assembly
Back to Top
Filter By Rating:
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Tommy F - September 15, 2020
Perfect fit and length
Fast delivery, arrived just on time for kitchen renovation.
Adam A - July 8, 2018
Only 1/2 of the Drain tube?
Received the drain tube in a few days, no issues with shipping. It appears to be only half of the drain tube. Although it says this part is correct for my washer, the end on the washer is a 90 degree bend, this does not have a 90 elbow. The drain hose supplied is the “last half” which connects to the air gap on the counter. Hopefully I’ll be able to find the “first part” of the drain hose, otherwise its not at all useable.