This part is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. Fan blade not included.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Noisy | Fridge too warm | Freezer section too warm | Fridge and Freezer are too warm
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barbara
September 27, 2017
My drain pan is filling and overflowing on the floor. Will replacing this part fix the problem? Is this what causes the water to evaporate during defrost cycle?
For model number GS6SHA
Hi Barbara,
Thank you for your inquiry. If your drip pan is overflowing, this may be caused by excessive humidity or there is not enough heat exchange from the compressor. The heat from the compressor is what evaporates the water in the drip pan. There may also be an issue with the a clogged or frozen drain line or a condenser fan issue. You may also have to check the defrost timer as well. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
October 25, 2017
Freezer is cold but refrigerator is warm and water is collecting under the vegetable/meat bin. What part would I need to solve the problem?
For model number ED2GHEXNQO1
Hi Robert, Thank you for the question. The first thing to check would be the fan at the back of the freezer. If this fan is not running the air would not circulate properly. If the fan is running you can check the rubber gasket around the door. Make sure there are no gaps or defects. If it is letting warm air in it can effect the temperature and cause sweating inside the appliance. If the coils have a ice build up or frost, you may need to replace the Bi-Metal Defrost Thermostat. If there is no frost build up I suggest testing the Thermostat Assembly. It is also a good idea to check the Air Diffuser Assembly to make sure it is opening and closing, letting cold air from the freezer over to the Fresh Food section. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
John
March 25, 2019
I have a kenmore coldspot 106.57282791. Noticed today that fridge was only cool, not cold.The freezer was at 17f, fridge at 46f. (sigh)
could hear the fan come on when freezer door was left open for a minute (while checking things out).
shifted control to direct most cold to fridge, and temperature control dial was set on 4 (6 is Max cold).
on the fridge side, a small amount of cold air is coming through the diffuser.
checked temperature a while later, fridge now up to 50f (guess i'm throwing a lot of stuff out).
turned controls to direct Max cold to fridge, and set to coldest.
checked about 5 hours later (just now), and fridge temp down to 30c.
i've the balance to be even between freezer and fridge for now and see what happens.
from those details, any idea if i'm looking at an evaporator fan/motor, diffuser, or other problem?
For model number 106.57282791
Hello John, thank you for inquiring. For this symptom, there are a few parts that may provide a fix. You may want to try replacing the Thermostat Assembly part PS11739232; the Defrost Timer part PS11723171; or the Bi-Metal Defrost Thermostat part PS11750673. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Anthony
June 2, 2023
Fan motor making a rumbling noise and the rpm's rise and fall slightly. Can you tell me what might be happening? All else seems to be working.
For model number ED5LHAXWT00
Hi Anthony, thank you for reaching out. Based on the description that you have provided, we would recommend checking the fan blades first for any damage. If that is not causing the issue, then you may need to check the evaporator fan motor, part number PS557957, as it is most likely faulty and may need to be replaced. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dan
May 13, 2019
Ref works than stops. Turn temp off or pull plug reset works for afew days shuts off. Sounds like the thermostat is bad or defrost timer. What parts do you suggest i get first
For model number gd25dfxfw01
Hello Dan, thank you for inquiring. For this symptom you will want to replace either the Thermostat Assembly part PS11739232, the Start Relay part PS11770133, or the Evaporator Fan Motor part PS557957. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lee
November 22, 2017
Compressor not getting any power
For model number KSRS22QAAL10
Hi Lee, Thank you for the question.If there is no power going to the compressor, I suggest checking the outlet the appliance is plugged into. You can also check the wiring to make sure nothing has come lose or is defective.If the compressor is getting power but not coming on, I suggest testing the Capacitor, Part Number: PS11757023 and the Overload Part Number: PS392659, with a Multi Meter to see if they are defective. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rick St. Charles
April 4, 2018
Fridge emits a loud buzzing which seems to be coming from the evaporator cover vibrating. When the cover is removed and the evaporator fan motor is on, the noise disappears. Have tried putting weatherstripping on the inside edges of the cover, but that didn't help. Thank you for your help. ~rick
For model number KSRB22QGSS00
Hi Rick,
Thank you for your question. If the noise is coming from the cover when the motor is on, the cover may not be secure or it is possible that the fan blade may intercepting the cover. You will need to inspect the parts to see which ones are causing the issue. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
June 30, 2021
Is this the right motor for my refrigerator?
For model number 10659512990
Hello David , Thank you for the question. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS557957. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Part Videos
Replacing your Whirlpool Refrigerator Evaporator Fan Motor - 120V 60Hz
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 23 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Evaporator Fan Motor quit working; top shelves of freezer got too warm
After viewing online videos of the repair process, it was very easy to replace the evaporator fan motor - just remove the back panel of the freezer compartment for EASY access to the evaporator motor. I received the new motor a day earlier than I thought I would. I took 15 to 20 minutes to replace the old motor. The only problem was the wiring on the new motor was on the opposite side of the motor as compared with the old motor. I was able to rotate the new motor enough for the new wiring to connect. VERY HAPPY with the results. A word of caution: the motor mounting brackets are plastic - go easy when trying to remove the brackets.
Adrian from REXBURG, ID
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It was making a noise
Take out shelves and back shelf pins and remove long cover. Disconnect wires and take old part out and installed new part. Then reversed and put everything back together. It worked perfect. No more noise
AUDRA from GRIFFIN, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper 1/2 of freezer not cold. Upper half of refrigerator not cold
Removed all drawers in freezer. Removed screws from slides for drawers on left side of freezer. Removed evaporator coil cover screws from behind where freezer drawers and shelf’s are. Removed wires from motor. Removed blade. Pressed black clip on both sides and removed motor. Reverse this process and put unit back together. Now fridge works great.
On the door cams. Just remove the top hinge on door. Replace upper and lower parts and replace door.
Upper halves of Refridgerator and Freezer were too warm.
Unplug fridge, remove shelves, remove back cover, unplug old motor, remove adapters from old motor, put adapters on new motor, install new motor, replace cover, replace shelves, plug fridge back in, give it 24 hours to stabilize thermally.
Joshua from GOFFSTOWN, NH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
noisy fan motors
remove the condenser fan mounting bracket, install new motor on bracket, then install bracket in refrigerator. Only issue is the smaller your hands the better, it is a tight fit, but not too hard to do. The evap fan motor is behind the back wall of the freezer. Empty the freezer and remove the back panel. Remove the fan blade and pull the 3 connections loose. Replace the bad motor with the new one, connect electrical connections back up and you are done. All parts were in stock and shipped in 3 business days. This is the second time I have used this site for repairs, I highly recommend them for any appliance repairs.
removed freezer shelves, removed back panel with screw driver. removed wires from fan motor, removed fan motor from mounting bracket, removed fan from motor. installed new motor in mounting bracket, installed fan on new motor,installed wiring on new motor. turned power on to check operation, installed rear panel and shelves. total time for job about a half hour
Les from Pine Beach, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator/Freezer not cooling
Disconnect power to refrigerator. Removed all food from Freezer. Removed all Shelves and shelf clips. Used phillips screwdriver and removed 6 screws from lower rear panel covering evaporator coil. Removed panel. Pulled plastic fan blade off top of motor shaft. Unclip top front of black motor retainer clip which then allowed the rear clip to unhook. Removed clip. Then removed 3 wires from fan motor, noting proper location for replacement. Slide the fan motor out to the left. Installed new motor. Reinstalled clip, hooking rear side first. Then rehooked the 3 wires. Slide fan blade back on top until secure. Tested everything at this point before reassembling rear panel. Then replace rear panel, replace the 6 screws, replace shelf clips and shelves and replace food. Very easy to do and saved about $150 over a service call to troubleshoot and re-visit to install after getting part
turned off the fridge ,removed the backwall plate in the freezer, replaced the motor. hint take your time taking off the blade fan the replacement is 20.00
William from Las Vegas, NV
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fan noisey, then stopped--no cold air circulation.
Side by side 25cf unit. removed contents from freezer, removed shelving, removed ice maker, removed shelving brackets, removed rear wall that serves as cold air duct, unplugged three electrical leads, pried off fan blade using putty knife to spread the prying force, removed fan motor by unlatching plastic mount ears.
Installing new motor is reverse of the above sequence. Very, very easy. Make sure you have the fridge turned off so power to the motor is cut off. Allows the light to remain on in the freezer, so you can see what you are doing.
Gary from Acworth, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer/refrigerator no air flow
Using a 1/4" nut driver and a philips screwdriver I removed all the screws in the shelf brackets and coil cover and removed coil cover. Removed fan blade and then faulty motor (held in with clips) Installed new motor-two wires (power) and ground (green) pushed fan blade back on and tested, then reinstalled all panels and shelf brackets.
Jim from Au Sable Forks, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
10 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
21 Reviews
4.5
Filter By Rating:
5 Stars
16
4 Stars
2
3 Stars
1
2 Stars
1
1 Star
1
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David B - December 27, 2022
Verified Purchase
Easy
Easy fix and saved refrigerator freezer
★★★★★
★★★★★
Mark T - October 15, 2021
Verified Purchase
Frig repair
Received part in timely manner, easy install. Refrigerator back in operation. Saved money by avoiding to hire a service tech
★★★★★
★★★★★
Blanca D - September 25, 2021
Verified Purchase
Simple & easy repair
Received part fast and thanks to the video you provided was fast and easy repair. My refrigerator is working now. Thanks
★★★★★
★★★★★
Mary J - June 30, 2021
Verified Purchase
Very difficult to replace, not much room to work inside and in the rear of the freezer compartment but presistence stubbornness
The part worked as expected and the refrigerator and freezer works again
★★★★★
★★★★★
Adrian B - March 10, 2021
Verified Purchase
Very easy repair!
The replacement motor came without delay. Installing the new motor only took 15-20 minutes. Very pleased with the results of the repair.
★★★★★
★★★★★
Clay D - January 29, 2021
Verified Purchase
Easy repair.
Part was as described. Online installation video was very helpful and had the job done in about 25 minutes.
★★★★★
★★★★★
Mark S - September 25, 2020
Verified Purchase
Right part & easy install
part was almost the sam ed, only in reverse if that makes sense ?? ?? but not enuf to wait another 2 weeks for ?? did my thing & fridge us cold once again the man cave has a fridge ??
★★★★★
★★★★★
Angelica S - August 6, 2020
Verified Purchase
Repair was very easy
The part came in just when it was expected. My fridge is working again, yay!!!
★★★★★
★★★★★
Boris F - July 17, 2020
Verified Purchase
Great part
My refrigerator back in order
★★★★★
★★★★★
Jolene L - June 5, 2020
Verified Purchase
Part Select goes above and beyond
The part was exactly what I needed! Thanks to Part Select for providing quality product and also resources that allowed me to fix my appliance myself! The husband is impressed!