GE/GE_Thumb/00124321i02.gif
See part 615 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Upper Dishrack with Wheels

★★★★★
★★★★★
12 Reviews
$134.70   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS5135680
Manufacturer Part Number WD28X10369
Manufactured by GE
Product Description

Upper Dishrack with Wheels Specifications

This dish rack includes the wheels. This dishrack is for dishwashers. Dishrack holds the dishes in place during the dishwashing cycle

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WD28X10369 replaces these:
AP5647411, 2400619, WD28X10369, WD28M0059, WD28M59, WD28X0259, WD28X0267, WD28X0277, WD28X10011, WD28X10022, WD28X10230, WD28X259, WD28X267, WD28X277
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Greg
    August 4, 2017
    Can you replace just the wheels?
    For model number 363.14482100
    Hi Greg, Thank you for the question, Yes the wheels for the upper rack are PS3486910 Upper Roller and Axle - Kit of 4. Hope this helps!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Kathy
    October 14, 2017
    The top rack is rusted but the wheels are fine. Can i get a rack without buying the wheels?
    For model number GSD2200G02WW
    Hi Kathy, Thank you for your question. Unfortunately you cannot. Good luck with your repair.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Annapurna
    July 16, 2019
    This dish water of mine is working very well. However the upper dishrack is partly broken. Can I replace this one and which part ( with part number ) I should by and also the stopper so that the dishrack will not slide out. Probably need the side rollers as well.Thanks anna
    For model number GSD3220F00BB
    Hello Annapurna, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part #: PS5135680 for the upper rack. This dish rack includes the wheels. The Stops are Part #: PS2370502. Hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Part Videos

      Replacing your General Electric Dishwasher Upper Dishrack with Wheels

      Customer Repair Stories
       Average Repair Rating: 4.4 / 5.0, 17 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Racks had rusted and needed replacement
      The bottom rack was a breeze since it wasn't attached to anything. The more difficult task was removing the plastic rail guard for the top rack. With some elbow grease and ingenuity, I finally figured out that it must be tilted prior to being popped out of its socket. Follow the same procedure after replacing the rack.
      • Barbara from Salinas, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        WD28X10369, WD28X10284
      61 of 66 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      racks had rusted but dishwasher still worked perfectly
      bottom rack was easy as just pull out and replace. Upper rack had to move front part of the brackets to pull out rack which did require some figuring out but I did finally get it and once I figured out one side the other was easy.
      • Harold from The Colony, TX
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WD28X10369, WD28X10284
      19 of 21 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      My dishwasher stills works perfect, but most of the upright prongs on my upper dish rack had broken and fallen off. I couldn't see buying another dishwasher so I entered my model # on the Part Select Website. I was easy, and three days later the new one was delivered to my doorstep.
      Replacing the rack was a "no-brainer". I simply removed the plastic keepers on the ends of the roller racks with a screw driver, pulled the old one out, slid the new one in, and then replaced the keepers with pliers. It couldn't have been easier.
      • Thomas from Spring, TX
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WD28X10369
      18 of 19 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Rusted out racks
      Followed the instructions and it was easy. Made the washer seem brand new!...It is the best solutions for a small budget. We used CLR to wash out the washer workings and it really left a sparkle on the dishes... I am so glad you don't change the models so much that parts can't be exchanged when they wear...
      • Everett (Jeff) from Altus, OK
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WD28X10369, WD28X10284
      11 of 13 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      After twelve years the prongs on the top rack began to break and rust.
      I ordered a replacement from partselect.com and received it in just three days. The only difficult part was deciding how to remove the white plastic end caps on the sliding rails. Finally, I took a small screwdrive and pried out the crimps in the metal, pulled the old caps out, inserted the new ones, and squeezed the metal together again using needle-nosed pliers. Nothing to it!
      Note: The configuration of the new rack isn't exactly like the original (size and placement of the prongs differ somewhat) but it fits perfectly and works great.
      • Jim from Wichita Falls, TX
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WD28X10369
      9 of 9 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      rusted dishracks
      very simple pull out the old and push in the new
      • MARK from CAPE CORAL, FL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        WD28X10369, WD28X10284
      5 of 9 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Rack rusting
      Took end caps off roller guides. Slid old out...slid new in...poped end caps back on...done. Too EASY!
      • melissa from ferrum, VA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        WD28X10369
      4 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Broken wheel and cage mount
      Once realized needed to open the wheel rail a little to remove wheel stop, it wasn't too difficult. Took about 20 minutes. Part came in a couple of days and was the correct part. Was disappointed that a similiar part, looked the same on the web site costing about $54.00 plus shipping, ended up costing about $100.00. Contacted customer service, said I needed to contact the factory. Seems like they should have researched the problem, Andy Duer
      • Joe from Belle Haven, VA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WD28X10369
      3 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      rusting of stems on upper rack
      The video was extremely helpful. Removing the tabs was easy. However, we struggled with the re-insertion. They did not "snap" back in as easily as seen on video. We ended up using a pair of pliers to push pieces into slot. We did not use very much pressure for fear of breaking the plastic. However, after many tries, we were successful & it works perfectly. Perhaps a close-up of the "snapping in" part might help future installers.
      • Pamela from HAMILTON, NJ
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WD28X10369
      3 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Old Rack Was Losing Plastic Coating And Was Rusting
      I removed the end caps on the two side tracks using pliers. I pulled out the old rack and inserted the new one. I replaced the end caps and I was done. It was that simple.
      • Steve from Medford, OR
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers
      • Parts Used:
        WD28X10369
      2 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      12 Reviews
      4.5
      Filter By Rating:
      • 5 Stars
        9
      • 4 Stars
        2
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        1
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS5135680
      Manufacturer Part Number: WD28X10369
      Brand
      Model Number
      Description
      Kenmore
      36314031000
      Dishwasher
      Kenmore
      36314031001
      Dishwasher
      Kenmore
      36314032000
      Dishwasher
      Kenmore
      36314032001
      Dishwasher
      Kenmore
      36314038000
      Dishwasher
      Kenmore
      36314038001
      Dishwasher
      Kenmore
      36314039000
      Dishwasher
      Kenmore
      36314039001
      Dishwasher
      Kenmore
      3631404193
      Dishwasher
      Kenmore
      3631404194
      Dishwasher
      Kenmore
      3631404196
      Dishwasher
      Kenmore
      3631404197
      Dishwasher
      Kenmore
      3631404593
      Dishwasher
      Kenmore
      3631404594
      Dishwasher
      Kenmore
      3631404595
      Dishwasher
      Kenmore
      3631404596
      Dishwasher
      Kenmore
      3631404597
      Dishwasher
      Kenmore
      3631404893
      Dishwasher
      Kenmore
      3631404894
      Dishwasher
      Kenmore
      3631404895
      Dishwasher
      Kenmore
      3631404896
      Dishwasher
      Kenmore
      3631404897
      Dishwasher
      Kenmore
      36314051690
      Dishwasher
      Kenmore
      36314051691
      Dishwasher
      Kenmore
      36314061790
      Dishwasher
      Kenmore
      36314061791
      Dishwasher
      Kenmore
      36314071790
      Dishwasher
      Kenmore
      36314071791
      Dishwasher
      Kenmore
      36314071792
      Dishwasher
      Kenmore
      36314071793
      Dishwasher

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service