The door latch is designed to keep your dryer door closed, even during the drying cycle. If your dryer door will not stay closed, the drying cycle might not start, or it could stop suddenly. If you notice this is happening, check the latch itself for any physical damage. If you notice that it is damaged, the latch should be replaced straight away. This genuine OEM part is compatible with different brands and models, so check to make sure it will properly fit yours before ordering. This door latch kit comes with both the strike and the catch. We suggest replacing both parts of the door latch at the same time.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close | Will Not Start | Lid or door won’t close
This part works with the following products:
Dryer.
This part works with the following products:
Frigidaire, Kelvinator, Westinghouse, Gibson.
Part# 5366021400 replaces these:
AP2153772, 12912, 08001593, 08015371, 3281064, 3281179, 5303276540, 5303276561, 5308015371, 5366021400-, 8001593, 8015371, 8950089, F000066021, F0066021-4, F066021-100, F066021-400, F066021400, F62660, F62661
... Show more
, F62661-1, F65661, F65896, F66021, F66021-4, FL00066021, G066021-400, Q000504552, Q504552
Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sheila
April 1, 2019
Does "partselect number ps475419, manufacturer part number 5366021400" Work with my dryer? It's model # is faqe7001lw0. The catch/latch is broken. Please help!
For model number FAQE7001LW0
Hello Sheila, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS418433, but the kit Part Number: PS475419 will also fit. Hope this helps!
Is it compatible with the model caqe7001lw0? Thank you in advance
For model number CAQE7001LW0
Hi Jean-Francois, thank you for your question. Unfortunately this part is not listed underneath your model as compatible. I have listed the correct parts below. Good luck with your repair.
Hello Polina, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS418433 for the Catch and PartSelect Number PS455020 for the Strike. The parts for this model are not sold as a kit. We hope this helps!
Hi Ron,
Thank you for your question. This kit is not listed for your dryer. The catch and the strike listed for your dryer are sold separately. The part number listed under your model number for the catch is PS418433. The part number listed for the strike is PS455020. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
The door catch is broken but i see that ps418433 is recommended (for $38) but ps475419 contains both the latch and the catch for $5. Am i reading this correctly? Why would i pay more for just the catch?
For model number Frigidaire # FFQE5100PW0
Hello Dennis, thank you for your question. The catch for your unit is PartSelect Number PS418433. Unfortunately, the other catch that includes both the latch and the catch is not listed as being compatible with your unit. I hope this helps.
Was this helpful?
Thank you for voting!
Part Videos
Replacing your Frigidaire Dryer Door Latch Kit
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 7 reviews.
What's this?
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Catch broke, door wouldn't stay closed.
Used a screwdriver to pop out broken piece. Used pliers to snap in new one.
Dianne from Kansas City, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
69 of 74 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door latch receptical
Removed broken part. Pressed replacement into opening.
Joseph from North Chatham, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
18 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Latch broke and fell out
remove new latch from package, insert into dryer door frame push into place with thumb until it snaps into place. Done!
James from ALLENSTOWN, NH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
11 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The catch (female part) on the dryer developed a tiny crack. The door latch (male part) could not fit securely so the door would not stay closed.
I watched a You Tube video first. I used a screwdriver to loosen the part that was attached to the dryer. I pulled it out of the dryer with pliers. I pushed the new part into place. The old latch worked fine so I did not replace it.
Everette R from ANNISTON, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door clip
Literally pop it in the small opening. Super easy and works perfectly now!
Gregory from SAN RAFAEL, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer does not start
Followed video instructions, easy installation. Unfortunately it didn't fix the problem. Plan to take back off and check belt, etc before ordering another part.
Anna from FLORENCE, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door latch receiver broke
Super simple pushed in the new receiver and boom all good and working
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
