Quick Question!

Have you ever purchased from PartSelect.com before?

474458-1-S-Frigidaire-5308027429        -High Temperature Adhesive
474458-1-S-Frigidaire-5308027429        -High Temperature Adhesive 474458-2-S-Frigidaire-5308027429        -High Temperature Adhesive https://www.partselect.com/Schematics/Frigidaire/ZHGITR3L.gif

High Temperature Adhesive

Your Price

$31.04
Order within the next 10 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS474458
Manufacturer Part Number 5308027429
Manufactured by Frigidaire

This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temperatures. Before applying the adhesive, ensure that the area is completely clean from any debris and is dry. You may wish to use small clamps to hold the material in place while it dries. If the felt has come loose or broken apart, this may cause your dryer to make loud noise, indicating that new felt or rubber needs to be glued into place. Use gloves to apply glue.

This part works with the following brands: Frigidaire, Kenmore, Electrolux, Gibson, Crosley, Westinghouse, Tappan, Kelvinator.

This part works with the following products: Dryer, Washer, Freezer, Dishwasher.

This part fixes the following symptoms:

  • Marks left on clothes.
  • Noisy.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.6 / 5.0, 5 reviews What's this?
1-5 of 5
 

16 of 26 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Pliers, Screw drivers
Customer: Chris from Toccoa, GA

Drum loose, causing high pitch noise.

First use a vacum to remove all the dust and lint inside the dryer fraim

Some problims removing old rear drum bearing assembly. Also removing old drum guide bottom Adhesive.
I used a new wire brush, but if I had a brush that fit a drill this would have been better to remove the adhesive.

I then applied the Glue, drum seal and small clamps to hold in place so the glue could dry overnight the next day 30 mins and the dryer was back togeather.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 19 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: More than 2 hours
Tools: Pliers, Screw drivers
Customer: Gerald from Alliance, NE

Burned out heater element

1.Remove 2 screws and the air intake grill on the back of the unit. remove the drive belt. 2. Remove 2 screws on rear of top, slide top back and remove. 3. Remove 2 screws about a foot down on the inside on each side of the front cover. Remove four screws that secure the plastic control panel and the front panel that are right behind the control panel on the top. Disconnect the wiring harnesses, cut the nylon wire tie that is closest to the front cover. 3. lay unit on its back and and remove the two screws on the lower edge of the front panel, take your putty knife and slide it in the gap between the front panel and the dryer cabinet and release the two spring clips on both sides. Then you can lift off the front panel and control panel, set it to the side. 4. Remove the screw and the nylon guide from the center of the top front case crossmember. Remove the three screws on the inside rear of the drum, lift out the drum and set aside. 5. The drum pivot just sits in a nylon socket, pop it toward the top of the machine and lift it out, you may want to clean it good and re-lubricate it on reassembly. Disconnect the wires from the heating element and the heat sensor. 6. Set the cabinet upright and remove the four screws on the back side of the rear of the cabinet but not the two that are right in the center, they hold the pivot fixture and don't need to come out. The heater coil pan is now loose and ready for removal. 7. The seal between the filter housing and the blower housing was torn and this is an important part to have right, any air leak here will do the same thing as a dirty lint filter or plugged dryer exhaust and your new heating element will have a short, hot life. I pulled the old one off, scrapped the old glue off, applied the adhesive like the instructions on the tube say and after a few minutes installed the new seal then set the front panel to the side to let the adhesive dry. 8. The reassembly is just the reverse of the disassembly , use a couple nails or awls to help hold the dryer heater pan in place for screw installation and you might want to gentle squeeze the wire connecters if they feel loose, also check for clogged or kinked exhaust and stress the importance of cleaning the lint filter after EVERY load, it is small and all the air that cools the heating element must go through it, if is isn't maintained your new element won't last long. Have fun!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

9 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: More than 2 hours
Tools: Screw drivers
Customer: THEODORE from INDIANAPOLIS, IN

Dryer would make squealing noise when used

First I removed the top of dryer by prying upwards with a screw driver to pop the clips that hold it in place,the second thing I done was to remove to screws that held the front of dryer in place,these screws are located in side the cover half way down.once tha twas completed I remove the front and took it out side where I used a wire brush to remove the old felt at least what was left.onced cleaned I applied the new felt using the supplied high temp glue and then used clothes pins to clamp the felt in place and left sit over night .next morning I installed with ease and all was fixed. NO MORE NOISE:)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers, Wrench (Adjustable)
Customer: Mark from SEABROOK, TX

Lots of noise from the drum scraping inside front of dryer and clothes being pinched.

First you need two people to get dryer to a location with plenty of elbow room. Then we just followed the instructions on the parts page. At our residence we take the dryer apart at least once a year to give it a good cleaning. During the year lots of dust accumulates inside the dryer box. This time upper and lower felt needed replacing; it is an easy fix just remove the old parts and install new the ones. Removing the old glue was the only slow down, but don't hurry this step you want a good clean surface to glue new felt on. While repairing the felt we discovered the insulation was cut away on one wire leading to the gas igniter. We repaired the wire and reassembled the dryer. We used the dryer the next day and discovered the wire harness was not reconnected. Another reason to have 4 hands and four eyes for this repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers, Socket set
Customer: Brian from Palm Harbor, FL

Drum bearing guides worn through - general rebuild

Removed two screws on bottom of front panel. Lifted bottom of front panel, it then it dropped down and was moved to the left side. Removed 4 socket screws and removed drum front cover. Replaced felt strip, removed belt and replaced. Replaced two idler pulleys in back. Removed blower housing front cover, removed blower wheel and replaced. Installed front drum glides after drilling out rivets from the old glides. Vacuumed entire inside thoroughly and reassembled.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5

Model Cross Reference

This part works with the following models:

PartSelect Number: PS474458
Manufacturer Part Number: 5308027429
Brand Model Number Description
Frigidaire41749022890Dryer - Residential, Electric
Kenmore41759012890Dryer - Kemore Dryer 41759012890
Frigidaire41759022890Dryer - Gas
Kenmore41764182300Dryer
Kenmore41769042990Dryer
Kenmore41769042991Dryer
Kenmore41769052990Dryer
Kenmore41769052991Dryer
Kenmore41774182300Dryer
Kenmore41774182301Dryer
Kenmore41779042990Dryer
Kenmore41779042991Dryer
Kenmore41779052990Dryer
Kenmore41779052991Dryer
Kenmore41780032990Dryer
Kenmore41780042990Dryer
Kenmore41780042991Dryer
Kenmore41780052990Dryer
Kenmore41780052991Dryer
Kenmore41780142000Dryer
Kenmore41780412700Dryer
Kenmore41781042000Dryer
Kenmore41781042001Dryer
Kenmore41781052000Dryer
Kenmore41781052001Dryer
Kenmore41781100000Dryer
Kenmore41781101000Dryer
Kenmore41781102000Dryer
Kenmore41781142000Dryer
Kenmore41781142001Dryer