Main Terminal Block Kit 5304409888

Hi Joe, Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the oven temperature probe, the main terminal block and the bake element. I hope this helps. Thank you and have a great day!

Hi Andrea, Thank you for the question. It sounds like when the element burnt out it may have shorted the Electronic Clock/Timer,PartSelect Number PS2581862.This part controls certain functions of your appliance such as bake, broil and the time.Hope this helps!

Hi Kim, Thank you for your question. If both elements in the oven are not working, it is likely the temperature sensor, but you will also need to check the electronic control board and the wiring between the electronic control board and the sensor. I hope this helps. Thank you and have a great day!

Hello Randy, Thank you for your inquiry. I would check the terminal block, the thermostats, the wiring harness that connects the element and the main control board. Hope this helps!

Hello Hank, thank you for your question. It sounds like the temperature sensor is gone in your appliance. The sensor measures the temperature in the oven and relays it to the board. You will want to replace the Temperature Sensor Part Number 5304504897. Good luck with your repair!

Hello Lynn, thank you for your question. If your element is reading between 0 - 50 ohms, then your broil element has continuity and has not failed. We would recommend testing the sensor, part number PartSelect Number: PS820208. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If this test passes, the issue is the electronic control board Part Number: PS440928, which has been discontinued by the manufacturer and is no longer available. I hope this helps!

Hi Joseph, Thank you for your question. There is a video listed with the part on our website that you referenced in your question to us that you may view on how to install it. You will find it listed under the photo on the webpage for the terminal block. I hope this helps. Thank you and have a great day!

Hello Peter, thank you for writing. For this symptom you will want to consider either the Oven Probe part PS10057397 or this Main Terminal Block part PS471605 for your model. We hope this helps.

Hello Sonny, thank you for your question. If the control knob was turned to the off position and the oven didn't turn off you will want to replace the oven thermostat and sensor, part number PS437311. This will also fix the issue with the oven getting too hot. I hope this helps!

Hello Rick, Thank you for the question. If there is power getting to the appliance but it is not powering on, you may need to replace the board, Part Number: PS1149757. Before replacing the board you can check the wire harness plugged into the board and the wiring from the terminal block. Hope this helps, good luck with this repair!