Dishwasher Timer WD21X10474

Hi Louis, Thank you for your question. If the timer is stopping mid-cycle, there may be an issue with the heating element. If the heating element malfunctions, this will sometimes cause the dishwasher to stop mid-cycle. To test the element, set your multi-meter to Rx1 and touch each probe to a terminal. Your reading should be somewhere between zero and infinity, refer to your owner’s manual to determine what reading you should receive for your model. If it is exactly zero or infinity it is defective. If your test produces a reading different from the manufacturer’s recommendation, you will need a replacement heating element. If the element is fine then check the timer. Set your multi-meter to Rx1000 and touch the contacts with the probes. Most functioning timers will fall in the range of 2000-3500 ohms of resistance, but this varies between models. Refer to your owner's manual to determine what reading your test should produce. If your test results differ from the manufacturer's recommendations, you will need a replacement timer. We hope this helps. Thank you and have a great day.

Hello Kevin, thank you for contacting us. It seems like there is a problem with your dishwasher timer, part number PS4704218. The timer manages the various dishwasher functions such as filling, washing, draining and drying and it is responsible for cycle selection. We hope that helps!

Hi Alex, thank you for reaching out. According to our research, the issue could be most probably with the timer. We would recommend replacing the timer, part number PS4704218, to solve the problem. It manages the various dishwasher functions such as filling, washing, draining and drying. Glad to be of assistance!

Hi Mark, Thank you for your question. There is a delayed hour button on your dishwasher where you can delay a cycle for 2, 4, or 8 hours. If this button was pressed a couple of times, this may be the reason the dishwasher washer was still running. If this was not the issue, you can try installing it to the hot water to see if this helps, if not you may need to replace the timer. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!

Hi Michelle, thank you for your question. According to our research, you need to do the following things to fix your issue: check for blockages, load the dishwasher correctly, clean or change the filter, part number PS3511267, inspect the drain hose, part number PS260686, double-check the drain valve, and try vinegar and baking soda. If these cannot fix your issue then you will need to check the following parts: drain solenoid kit, part number PS1481923, and the pump and motor assembly, part number PS3486941. Please reach out to customer service if you need help placing an order. Glad to be of help!