Frigidaire/Frigidaire_Thumb/QKYR9TUK.gif
See part 2 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Burner Switch Kit

★★★★★
★★★★★
8 Reviews
$31.66   Special Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS470145
Manufacturer Part Number 5303935086
Manufactured by Frigidaire
Product Description

Burner Switch Kit Specifications

This is a burner switch kit, also known as the surface element control switch repair kit, for ranges. This burner switch kit sends voltage to the surface element coil and it controls the stove top surface burner. If the following symptoms occur, installing the switch could be the solution to the problem: surface element not heating, overheating, or inconsistent heating. Usually, if the element is not defective, that is a sign there is an issue with the switch. The kit comes with several insert sizes, and includes screws as well. The tools needed for this project are a nut driver, pliers, and screwdrivers.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop, Wall Oven.
This part works with the following products:
Frigidaire, Tappan, Kelvinator, Kenmore.
Part# 5303935086 replaces these:
AP2591804, 152, 08002908, 08002909, 08005304, 08005305, 08011487, 08011488, 08012863, 08012864, 3051032, 3051035, 3051540, 3051541, 3051680, 3051681, 318120503, 318120504, 3204920, 3206430 ... Show more , 3206431, 351112, 5300007822, 5300214001, 5300214002, 5300214023, 5300214024, 5300275711, 5300275712, 5301313767, 5301313768, 5301506243, 5303051035, 5303051540, 5303208037, 5303209958, 5303270885, 5303270886, 5303282823, 5303285142, 5303285143, 5303285410, 5303285411, 5303285954, 5303286367, 5303297482, 5303297483, 5303299248, 5303299249, 5303299752, 5303299753, 5303300157, 5303300158, 5303305028, 5303305029, 5303305030, 5303306286, 5308002908, 5308011487, 699T015P01, 699T017P01, 699T017P02, 7822, 8002908, 8002909, 8005304, 8005305, 8008829, 8011487, 8011488, 8012863, 8012864, 9689, 9690, A1505576, AP00351099, AP00351112, AP00351113, AP351099, AP351112, AP351113, K000131767, K001313766, K001313767, K001506243, K1313766, K1313767, K1313768, K1506243, P351099, P351112, P351113, Q000172001, Q000172002, Q000172003, Q000172004, Q000172011, Q000172012, Q000211863, Q000214001, Q000214002, Q000214003, Q000214004, Q000214011, Q000214012, Q000214023, Q000214024, Q000275711, Q000275712, Q214001, Q214002, Q214004, Q214023, Q214024, R351403, WQ214004, WQ214012 Show less
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

9 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Tom
    December 7, 2017
    I have a 22” Tappan electric range. All 4 burners get warm but not hot. I’m guessing it’s the left burner control that’s not letting all 220volts through. This unit is old and fits nicely in our apartment so we would like to repair it. I’m a diy ‘er and want to repair it myself.Thanks tom
    For model number MEF500PBDD
    Hi Tom, Thank you for your question. Based on what you described, you will need to replace the burner switch. I hope this helps. Thank you and have a great day!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Don May
    August 21, 2017
    Do i have to buy a separate knob for the top burner switch
    For model number MEF300PBWD
    Hi Don, Thank you for your inquiry. If the knob you are using for your current switch is still in good shape you can still use that. If you do need to order a new knob, we do have them in stock and the the part number for it is PS464504. I hope this helps. Thank you and have a great day!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Norman
    February 13, 2020
    Burner heats to Max but will not turn down...will this fir Frigidaire. model # CPES389CC1 and ser: NF24908513. Type 3S5A
    For model number CPES389CC1
    Hi Norman, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. Good luck with your repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Herbert Tomaschko
    February 27, 2018
    Need control switch for front burner, (large burner). Will p/n 5303935086 work for large burner? Not sure if your burner switch 5303935086 works for both large and small burners.
    For model number REG34NL2
    Hi Herbert, Thank you for your question. The burner switch kit you have referenced in your question will work on the large burner. I hope this helps. Thank you and have a great day!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Frank
    July 2, 2019
    I am unable to adjust the heat on the left-front heating unit. It appears to operate at full heat regardless of switch setting.
    For model number RBS137C
    Hello Frank, thank you for writing. For this symptom, you would want to consider either the Surface Element itself, the Terminal Block, or the Surface Burner Switch part PS470145. Unfortunately, the Surface Elements and Terminal Block for your model are discontinued and are no longer available. We have no known replacement information in our system. We recommend you contact Frigidaire directly to see if they have recently released new substitutes if you want to replace the discontinued parts. Please feel free to get back in touch with us to place an order if they provide substitution part numbers. Thank you.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Carol
    July 18, 2019
    Need to replace the burner switch and wondering if this replacement will work, it looks more like what is on the stove than what a local service place sold us that doesn't work. The wires just aren't long enough for the universal replacement.
    For model number NFH3C
    Hi Carol, Thank you for your question. The model number you provided is not coming up on our website. Here is a link from our website that you may reference on where to find the model number on your range, https://www.partselect.com/Model-Number-Locator+8+repair.htm. If this is the correct model number, you will need to contact the manufacturer for more information. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Ryan
    August 20, 2019
    This is a Kenmore with bad infinite switch. Need front left burner switch. Which is 4th on left of console. Not a dual burner so don't think its part # 316238201. Any thoughts?
    For model number 7909611340a
    Hello Ryan, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3504401. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Eric
    February 16, 2018
    I purchased a surface element switch from you model number is above and i installed it everything is working fine except the pilot light stays on even when the switch is off i am assuming that i put the pilot light wire in the wrong place can you help me
    For model number 5303935086
    Hi Eric, Thank you for the question. The Pilot light wire goes on the terminal parked with a P. Good luck with the repair!

    Was this helpful?
    Thank you for voting!
    Orv
    February 19, 2020
    We have an older model large kenwood electric range that fits perfectly in the allotted kitchen space. One of the large surface burners comes on at high heat (glowing) whenever the control knob is turned on, no matter what setting is selected, even lo setting. Since it's evident that the burner works, i believe the problem is in the switch but, i wanted to be fairly certain before i purchase a replacement switch. Greatly appreciate your expert advice.
    For model number Kenwood Elect Range Model 628-9468894
    Hello, Thank you for your question. I would look into this part- Part Number PS470145. That seems the be the switch kit. We hope this helps.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 3.8 / 5.0, 7 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        High heat reluctant to turn down.
        Most of the job is simple fastener mechanics.
        Use a nut driver or Phillips screwdriver. Remove rear panel.

        Pull out control knob. If it is stuck, wrap a small rag around the back of it and pull the rag steadily.

        Carefully match marked terminals on the replacement switch with those on original. Switch terminals may not be in the same location. Replace wires one for one, one at a time.

        Carefully select the correct knob filler for the switch post. Several are supplied. Proceed with logic and measure the shaft length and the filler length and type to match.
        • George from New Port Richey, FL
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Pliers, Screw drivers
        • Parts Used:
          5303935086
        44 of 48 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Right front burner would over-heat
        First of all I removed the top panel then removed the switch. I then took pictures of the switch & drew a sketch with all the info. Then I went to your web site, matched up the switch & ordered.
        When the switch arrived I went thru the above replacing the bad switch.
        • Melvin from Attica, MI
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          5303935086
        22 of 26 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        The left front burner would not turn off, and the switch was sparking
        First I unplugged the stove, and removed the upper-back panel. Then I pulled off the control knob. Then I removed the two screws holding the switch to the stove. Then one-by-one I removed the wires from the old switch and connected them to the corresponding tabs on the new switch. Then, using the knob adapter supplied with the new switch, I figured out how much of the knob shaft I had to remove from the new switch to position the knob the correct distance from the face of the stove. Then I tested the switch with a voltmeter as instructed, and then I hooked up the last wire.
        Partselect.com is an awsome website!!! I was able to review comments form other do-it-yourselfers that had similar problems. Then I looked up the Partselect schematic drawings of my stove and was easily able to find and order the part I needed. The part arrived at my house within a couple of days and I had the stove fixed in no time.
        • Dan from Mulvane, KS
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Pliers, Screw drivers
        • Parts Used:
          5303935086
        13 of 15 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Old switch killed by a short between wires
        Turn off the electricity
        Remove knob
        Unscrew old switch
        Lift stovetop & prop
        Remove wires from switch
        Remove switch
        Plug wires onto new switch
        Put new switch in place
        Shut stovetop
        Screw new switch in place
        Trim knob post
        Put adapter on post
        Put knob back on
        Turn electricity back on
        Cook dinner :)
        • Darren from San Diego, CA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers, Screw drivers
        • Parts Used:
          5303935086
        9 of 11 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Switches were going bad and making a popping sound and smoking.
        Pulled out the range, unplugged it and removed the upper back panel. The switches were held in place with two screws. Removed the old switches, detached the wires and plugged them into the new switches. Mounted the new switches, replaced the back panel, plugged the range back in and pushed it back into position. Appliance repair company wanted $370. I did it in 45 min. for less than $100.
        • Joshua from Homestead, FL
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers
        • Parts Used:
          5303935086
        4 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Front left burner would not shut off, then switch fried
        Unplug range, remove top back panel. Remove knob. Replacement part is different, but if you look closely, each metal tab has a number stamped on the plastic housing directly beneth it. Remove old switch (2 screws)and remove and replace wires one at a time. You will need to cut the "one size fits all" metal shaft that the knob attaches to. We had to remove most of it, leaving only 2 "segments". File rough edges and apply vaseline so that the plastic sleeve will slip right on. We used the shorter sleeve (only 2 that are supplied will fit the knob). Replace unit and screw in. Replace knob.
        • connie from madison, NC
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers, Socket set
        • Parts Used:
          5303935086
        4 of 7 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Burner will not cool down. I have to switch all the way off.
        First unplug the electricity from the stove. Replacement terminals on back of switch are set different than the originals. So, I took notes (purple wire =P, Black wire=L1, two yellow wires = H1 & H2, and orange wire=L2). Your stove might be different in the color coding. Just take notes. First I unscrewed the screws on the top back plate of the stove. Removed the back plate. Took notes on where the wires went. Removed the wires going to the five terminals. Unscrewed the two screws on front panel of the stove holding the old switch in place. Removed the old switch. Put in the new switch through the back of stove. Determined the length of the control shaft. Take the switch back out. With two pliers on the control shaft, holding the pliers closer to the switch firmly, use the second pliers just past the predetermined breaking point. With the second pliers snap off the control shaft. Be careful not to snap off two much. Place the switch in the proper place and mount to the stove. You may need some parts in the assembly parts package for this. I did not. Inside of the parts package is a set of plastic parts. I selected the part I needed to insert into the control knob for a bushing just to take up space. I placed that part inside of the control knob. I then placed it onto the control shaft. Plug back the wire going to the electric outlet. Instead of unplugging and plugging, you might want to switch off the circuit breaker and switch back on when the job is done. It works!
        • Bennie from Kite, GA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Screw drivers
        • Parts Used:
          5303935086
        1 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          8 Reviews
          3.8
          Filter By Rating:
          • 5 Stars
            4
          • 4 Stars
            2
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            2
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS470145
              Manufacturer Part Number: 5303935086
              Brand
              Model Number
              Description
              Kenmore
              1196457810
              Wall Oven
              Kenmore
              1196458010
              Wall Oven
              Kenmore
              1196458011
              Wall Oven
              Kenmore
              1196458110
              Wall Oven
              Kenmore
              1196458111
              Wall Oven
              Kenmore
              1196458112
              Wall Oven
              Kenmore
              1196467810
              Wall Oven
              Kenmore
              1196468010
              Wall Oven
              Kenmore
              1196468011
              Wall Oven
              Kenmore
              1196468110
              Wall Oven
              Kenmore
              1196468111
              Wall Oven
              Kenmore
              1196468112
              Wall Oven
              Kenmore
              1196477810
              Wall Oven
              Kenmore
              1196478010
              Wall Oven
              Kenmore
              1196478011
              Wall Oven
              Kenmore
              1196478110
              Wall Oven
              Kenmore
              1196478111
              Range
              Kenmore
              1196478112
              Wall Oven
              Kenmore
              1196487810
              Wall Oven
              Kenmore
              1196488010
              Wall Oven
              Kenmore
              1196488011
              Wall Oven
              Kenmore
              1196488110
              Wall Oven
              Kenmore
              1196488111
              Range
              Kenmore
              1196488112
              Wall Oven
              Kenmore
              1196498210
              Wall Oven
              Kenmore
              1196508210
              Wall Oven
              Kenmore
              1199008710
              Range
              Kenmore
              1199008810
              Range
              Kenmore
              1199018710
              Range
              Kenmore
              1199018810
              Range

              Get in touch, we're here to help!

              Open until 10PM EST

              Contact Customer Service