Terminal Block Kit 5303935058 | Official Frigidaire Part | Fast Shipping | PartSelect
Terminal Block Kit – Part Number: 5303935058
Terminal Block Kit – Part Number: 5303935058 Terminal Block Kit – Part Number: 5303935058 https://partselectcom.azureedge.net/Schematics/Frigidaire/QKYR9TUK.gif

Terminal Block Kit

Product Description

Terminal Block Kit Specifications

This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If your range/oven is having symptoms such as burner not heating, heating elements not working, burning smell, or if the oven is making a buzzing noise then this could be the solution. The tools needed to replace the kit are wire strippers, a heat gun or hair dryer, and #1 square heard screw driver. Refer to the installation/instructional video for further guidance to accurately replace the element.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Element will not heat, Will Not Start.

This part works with the following products:

Range, Cooktop, Wall Oven.

This part works with the following brands:

Frigidaire, Tappan, Kenmore, Kelvinator, Gibson, Westinghouse, Crosley, Uni, General Electric, Electrolux.

Part # 5303935058 replaces these:

08002879, 08002916, 08002917, 08002918, 08002919, 08003109, 08008697, 08008699, 08010475, 08011433, 08011962, 08012830, 08012865, 08067829, 08950054, 09957075, 12871, 3008769, 3016601, 3016957... Show More
Questions and Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Part Videos

Replacing your Frigidaire Range Terminal Block Kit

Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 26 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Steven from Taylors, SC
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Parts Used:
5303935058, 3051163, 3051162
rental property stove only had 2 working burners and bottom drawer off track
first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink wrap on wires and used the wire nuts to connect wires together then heated the shrink wrap. I then put screws back in terminal block brackets. I then put the burners on while looking under lid so i would know they were making good connections as this is a bad design from factory. if you pull out burners to clean them and they are not put back in right you dont have a good connection and that causes the terminal blocks to get hot and melt. thats what happened in my case.
As far as the drawer glides they just snap into place
364 of 370 people found this instruction helpful.
Was this instruction helpful to you?
David from Encinitas, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
5303935058, 316442301
burner shorted out
I followed the directions by clipping wires to old burner socket, splicing the wires to new terminal block, screwing down new "block bracket," and plugging in new burner.
52 of 60 people found this instruction helpful.
Was this instruction helpful to you?
Matthew from Columbus, IN
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Parts Used:
316442301, 5303935058, 318372211
Burners on 53 year old range kept going out
When we bought our home less than a year ago, we had three functional burners on our 40" wide 50's classic Kelvinator (not close to standard size these-a-days). After a few months of use, two more burners went out for good and we were stuck using the back left burner for all of our cooking. I opted for the premium burners and made sure to compare my terminals with the ones online to be sure they mounted the same. I removed the burners and terminals, clipped the wires going into the terminals, and removed the top of the stove. I followed the directions that came with the new terminals, pushed in the new burners and viola! All four burners now work. I gave the stove a general cleaning and now my 1954 Kelvinator looks and cooks like it is brand new. It was easily the best $109 I've spent on my home.
24 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Kathy from Lebanon, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
5303935058, 316442300
burner quit working
pull out old burner, lifted range top change the terminal which took about 5 min. close top put new burner in and was ready to go. works great.
20 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Gary from hollywood, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
5303935058
corroded terminals
was more of a job of splicing wires together than anything else. Loved the heat shrink electrical tubing
to put over the wires for insulation. used a hair
dryer. must buy more of that amazing stuff
17 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Shaun from Whitehall, MD
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers
Parts Used:
5303935058
Block terminal burnt out, hot plate not working, needed to replace the terminal block
This should take approx 15-30 mins. It took me 1.5 hours as I pushed the terminals into the wrong end of the block. It's very difficult to get them out when you do that... However, there are no easy instructions on the block or in the instructions to tell you which end to push the terminals into!!! So, with a 50:50 chance of getting it right, I got it wrong. I think most people would need to buy a new part if they do this. It would be very much easier if the block, had an arrow that simply said IN here so that this type of simple mistake is less easy to do... If you get that right, the fix is quite and straight forward. Good luck.
13 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Daivid from North Attleboro, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
316442301, 5303935058
burner wont heat all of the time
removed old terminal block . cut wires and spliced new terminal block and insulated with shrink wrap. Very eazy
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Margaret from Portage "BlueKnob", PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
5303280336, 316048413, 5303935058
wiring was burnt off to burner
The range, (1988 Tappan) was givin to the church by one of our members. While using it, --after a period of time-- the wire burnt off to one of the burners. Since the couple gave us a brand new top for the stove that was still in the box, we decided to fix the stove up.
Now, with new wiring to all four burners, new shiney drip pans and,,,,a new top, we have a very new looking stove for in our church kitchen.
The parts I ordered from PartsSelect, came in just a few days of placing the order,
This is one site that I have wrote down in my address book for any future parts to items we may need.
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Gilbert J from HERCULES, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
316442301, 318372211, 5303935058
To replace the termianl block and the elements
I ordered the correct parts(elements) and PartSelct sent the correct Frigedaire substitute parts.One of the 3 piece metals underneath the element is too long and the element does not fit on top of the bowl of the burner. Frigidaire should make the right substitute parts (elements) for that model.The terminal block took sometime to replace and it works with the old element.
10 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Doug from Ashton, IA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
5303935058
burner wouldnt heat
removed element , cut wires, conected wires,replaced element
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
14 Reviews
4.5
out of 5
Filter By Rating:
  • 5 Stars
    11
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Stars
    1
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS470125
Manufacturer Part Number: 5303935058
Brand
Model Number
Description
Kenmore
1196458010
Wall Oven
Kenmore
1196458011
Wall Oven
Kenmore
1196458110
Wall Oven
Kenmore
1196458111
Wall Oven
Kenmore
1196458112
Wall Oven
Kenmore
1196468010
Wall Oven
Kenmore
1196468011
Wall Oven
Kenmore
1196468110
Wall Oven
Kenmore
1196468111
Wall Oven
Kenmore
1196468112
Wall Oven
Kenmore
1196478010
Wall Oven
Kenmore
1196478011
Wall Oven
Kenmore
1196478110
Wall Oven
Kenmore
1196478111
Range
Kenmore
1196478112
Wall Oven
Kenmore
1196488010
Wall Oven
Kenmore
1196488011
Wall Oven
Kenmore
1196488110
Wall Oven
Kenmore
1196488111
Range
Kenmore
1196488112
Wall Oven
Kenmore
1196498210
Wall Oven
Kenmore
1196508210
Wall Oven
Kenmore
1199008710
Range
Kenmore
1199008810
Range
Kenmore
1199018710
Range
Kenmore
1199018810
Range
Kenmore
1199018811
Range
Kenmore
1199018813
Range
Kenmore
1199018883
Range
Kenmore
1199028410
Range