Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Frank V - May 6, 2019
Verified Purchase
Light switch replacement
Old switch was a challenge to remove and a small flat screwdriver depressing the retainer tabs did the trick. Once out the molded plug made replacement easy. Part fit perfectly and snapped easily into place. Don’t make the mistake of leaving the refrigerator plugged in when you do this, as there is 120 volts going through this switch.
★★★★★
★★★★★
Rodger C - February 17, 2018
Verified Purchase
Great experience!
Part arrived on time. Worked great!!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Light wouldn't turn on when door opened
Unplugged fridge, opened the door, used flat head screwdriver to pop off old switch, unplugged wires, plugged in new switch, popped it back in, and plugged the fridge back in. 2 minute fix.
Matthew from SOUTH BEND, IN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barry
August 3, 2017
I can get the freezer door's light switch loose from the panel but there appears to be insufficient wiring slack to enable me to pull the switch out of the hole. Should I disassemble the control panel to remove the switch?
For model number FRS20ZRGW6
Hi Barry,
Thank you for the question! If you take a small flat head screw driver and pry the switch from the hole enough to use the head of the screw driver to push down on the clips that hold it in place, you should be able to pull the switch from the hole no problem and disconnect the plug. Perhaps the wires are snagged? If this is the case you may have to disassemble the control panel to get to the back to disconnect the wire this way.
Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS461251
Manufacturer Part Number: 5303289051
