Part Location Diagram of 5303283286 Frigidaire Front Lower Drum Seal
See part 21 in the diagram
Replacing your Frigidaire Dryer Front Lower Drum Seal
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Front Lower Drum Seal 5303283286

 Fits your GEF331AS0!
★★★★★
★★★★★
3 Reviews

Rated by 66 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 33.80
  On Order
 Fits your GEF331AS0!
PartSelect Number PS460194
Manufacturer Part Number 5303283286
Manufactured by Frigidaire for Frigidaire, Kenmore, Gibson, Tappan
Product Description

Front Lower Drum Seal Specifications

The front lower drum seal is used in the assembly of dryers. This seal helps keep your appliance running quietly. It allows the drum to smoothly rotate on the front panel. If you notice brown marks on your clothing, if the dry cycle is taking long, or if there are unusually loud noises, the seal might be worn down. If that is the case, you will need to replace the seal. This replacement part is made out of felt. The high temperature adhesive required to install this seal is sold separately. Before you begin any repair work, make sure the appliance has been unplugged.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Dryer Front Lower Drum Seal

Replacing your Frigidaire Dryer Front Lower Drum Seal
Troubleshooting
This part fixes the following symptoms:
Marks left on clothes | Noisy
This part works with the following products:
Dryer, Washer Dryer Combo.
Part# 5303283286 replaces these:
AP2143044, 456, 5303283286, 616044-000
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 2.8 / 5.0, 66 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
dryer drum quit turning
followed the instructions video on the site had no problems just took about 2 hrs to complete
Other Parts Used:
Drum Belt Upper Drum Glide Front Lower Drum Seal Drum Support Bearing
  • FRANK from VERO BEACH, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The drum was squeaking and running slow
Removed drum replaced bearing with kit, replaced both front drum seals and drive belt. The only problem was when replacing the rear drum ball the three screw holes were poorly tapped and took several tries to get them in. The manufacturers could easily fix this problem. They could provide self tapping hex head screws instead of the Phillips head screws. Everything else went very smoothly.
Other Parts Used:
Multi-Rib Drum Belt Upper Drum Glide Front Lower Drum Seal Rear Drum Bearing Kit
  • Terry from TENINO, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
clothes got burn marks
After pulling out and unplugging my machine I followed the procedure already worked out by others. I bought and replaced all the parts that were listed as involved with this problem, since I only wanted to do this once and the parts were pretty cheap. The only slightly hard part was reconnecting the drum to the bearing, this could be easier with a third hand.Everything went well and the dryer works fine.
Other Parts Used:
Drum Belt Seal Upper Drum Glide Front Lower Drum Seal Rear Drum Bearing Kit
  • Richard from Santa Rosa, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers, Wrench set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clothes were catching between drum and opening
I followed the video example which very clearly showed how to do the repair. Much easier than I had expected.
Other Parts Used:
Upper Drum Glide Front Lower Drum Seal
  • EDWARD from DELAVAN, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clothes were getting stuck and burning in the gap between the dryer and the drum.
Opened up the dryer, scrapped off the old glide and seal. Applied adhesive as instructed. Glued on new seal and glide and reassembled dryer.
Other Parts Used:
Upper Drum Glide Front Lower Drum Seal
  • DEBRA from EL SEGUNDO, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper drum guide was wore out allowing the drum to sit lower than it should. Clothes would get caught between the drum and the frame.
unpluged the dryer. Used butter knife to open the top. Used screw driver to take the front off. Two screws one in each corner. removed all wiring from the front. Moved front into better light. Used sharp knife to remove old felt and guide material. Cleaned the door well. Used glue provided in the repair kit. Placed felt and guide on door. Allowed to dry. reversed take off and ran dryer. Worked like a new one.
Other Parts Used:
Upper Drum Glide Front Lower Drum Seal
  • Kenneth from Coolidge, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
small brown burn like marks on clothes.
The online descriptions were very helpful. I used a wooden kitchen fork to pry open the top of the dryer from the front, about 3 inches in from each side. Two metal springs hold the lid. The wire harness was on the right and two disconnects were easy to separate. Remember to disconnect power before you start. On the inside on the left and right sides are two screws which hold the front on. Remove these screws and the front panel will lean forward. Remember to support the drum as you pull the front off. Remove both top and bottom felt seals. I used a putty knife to aid in the removal of seals. Scrap the residue with the putty knife to remove. Run a bead of glue all around and let set for two minutes. Place top drum guide on first, and center on top. Put lower felt seal on next and tie a rope all around on top of felt, to hold in place while glue dries. Let dry for 30 minutes and remove the rope. Reassembly dryer. Test on low heat. It really is easy to do. Celebrate.
Other Parts Used:
Upper Drum Glide Front Lower Drum Seal
  • John from Kirkland, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The upper drum glide was worn out
I followed the directions that came with the new Drum Glide kit. Unplugged the machine from the wall outlet. Raised the top of the machine which only required releasing the front top clips. Removed the two screws that hold the front cover on. Unplugged the harness connectors to the controls on the front cover. Pulled the front cover loose from the retaining clip and raised it to release the lower part of the front cover. I then removed both the Glide and the lower seal. Had to use Acetone to remove the old adhesive. Used the adhesive that came in the kit to put the new glide and lower basket seal on. I used small clamps to ensure a good fit as the adhesive cured.
Then I put the front cover on raising the drum in the front to allow it to fit into the front cover. The rest was the reverse of what I did to remove the cover. I feel this is an ease repair. The hardest part is cleaning the old adhesive off.
Other Parts Used:
Upper Drum Glide Front Lower Drum Seal
  • Ray from Boerne, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Once in a while a piece of clothing would get stuck between the dryer tumbler and the frame around it, it would leave a burn mark on the piece of clothing that got stuck.
I noticed that the dryer drum had some free play and would allow the clothing to get lodged between the drum and the frame around it. I popped the top off the dryer and found that the lining on top of the frame work that carries the drum was woren out. I got on the web and the parts listings and order the part on a thursday and the part was here the next day in the afternoon. I took the old part off and glued the new part on and left it dry over night. the next day I assembled the dryer and it was back in use. The wife was very happy that no more clothing was getting lodge and ruined.
Other Parts Used:
Upper Drum Glide Front Lower Drum Seal
  • Francis from Colesburg, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Thumping in drum in every revolution
I first watched the video. Had I not done that, I probably would have started looking for a new dryer. The repair is simple and I feel like now I could repair just about anything on the dryer.
Other Parts Used:
Drum Belt Upper Drum Glide Front Lower Drum Seal Rear Drum Bearing Kit
  • Douglas from Cumming, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
37 of 44 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
October 9, 2019
There is a big gap at the top of the front seal. Clothes have gotten stuck and it smells like something is burning. Do I need a new front lower seal?
For model number FSE748GFS1
PartSelect logo
Hi Kevin, Thank you for your question. If there is a gap at the top and the clothes are getting stuck and you have a burning smell, the seal may be worn and you will need to replace it. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Sergiy
January 30, 2023
Are part numbers PS460194 and 5303937183 identical or interchangeable? It is Kenmore dryer
For model number 970C8004200
PartSelect logo
Hello Sergiy, Thank you for contacting us. The part numbers PS460194 and 5303937183 are two different parts for different parts. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS460194. We hope this information helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Sergiy
January 30, 2023
I need to replace both: Upper Drum Glide part #PS470317 and Front Lower Drum Seal part #PS460194 on Kenmore Dryer. Upper Drum Glide comes with adhesive. Will this adhesive cover putting on both the glide top portion and the lower felt?
For model number 970C8004200
PartSelect logo
Hello Sergiy, thank you for your question. Yes, the High Temperature Adhesive 5308027429 should be enough to cover both the upper and lower felt pieces. We are pleased to have been able to help.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Steve
May 7, 2018
Regarding the scorching of clothes, isn't there a thermostat in the dryer that can be adjusted to either run the dryer hotter or cooler?
For model number FDE336RES2
PartSelect logo
Hi Steve, Thank you for your question. The temperature on your dryer cannot be adjusted. For information on each dryer setting for your dryer, you will need to consult your owner's manual. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Steve
May 5, 2018
I'm getting scorch marks on clothing when using this dryer. Also, the metal rotating drum is very hot to touch. A dryer has to be hot to dry clothes, but is it normal that the inside of the drum, wherein the clothes are placed, is so hot that one could burn their finger if the metal was touched at the end of the drying cycle? It definitely isn't normal that clothes are being scorched! What part do i need to replace to fix this issue?
For model number FDE336RES2
PartSelect logo
Hi Steve, Thank you for your question. If your dryer is getting too hot, your dryer may be running to hot because of a clogged vent. It may also be running too hot, if you are overloading the dryer. This can also lead to scorch marks on your clothes because the dryer cannot tumble properly and the clothes stay in contact with the heated drum. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS460194
Manufacturer Part Number: 5303283286
Brand
Model Number
Description
Frigidaire
41749012890
Dryer - Residential, Electric
Frigidaire
41749022890
Dryer - Residential, Electric
Kenmore
41759012890
Dryer - Kemore Dryer 41759012890
Frigidaire
41759022890
Dryer - Gas
Kenmore
41769042990
Dryer
Kenmore
41769042991
Dryer
Kenmore
41769052990
Dryer
Kenmore
41769052991
Dryer
Kenmore
41779042900
Dryer - Kenmore Dryer Model 417.79042900 (41779042900, 417 79042900) Parts
Kenmore
41779042990
Dryer
Kenmore
41779042991
Dryer
Kenmore
41779052990
Dryer
Kenmore
41779052991
Dryer
Kenmore
41780032990
Dryer
Kenmore
41780042990
Dryer
Kenmore
41780042991
Dryer
Kenmore
4178005291
Dryer - Kenmore Dryer Model 417.8005291 (4178005291, 417 8005291) Parts
Kenmore
41780052990
Dryer
Kenmore
41780052991
Dryer
Kenmore
41780142000
Dryer
Kenmore
41781042000
Dryer
Kenmore
41781042001
Dryer
Kenmore
41781052000
Dryer
Kenmore
41781052001
Dryer
Kenmore
41781142000
Dryer
Kenmore
41781142001
Dryer
Kenmore
41782042100
Dryer
Kenmore
41782042101
Dryer
Kenmore
41782052100
Dryer
Kenmore
41782052101
Dryer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service