Flat Style Belt 5303281154 | Official Frigidaire Part | Fast Shipping | PartSelect
Flat Style Belt – Part Number: 5303281154
Flat Style Belt – Part Number: 5303281154 https://partselectcom.azureedge.net/Schematics/Frigidaire/EVQTGCBJ.gif

Flat Style Belt

Product Description

Flat Style Belt Specifications

This is a flat style ridgeless dryer belt.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Will not tumble | Noisy

This part works with the following products:

Dryer.

This part works with the following brands:

Frigidaire, Westinghouse, Kelvinator, Gibson, Tappan, Kenmore.

Part # 5303281154 replaces these:

08015141, 3281154, 3372, 5303281154-, 8015141, AP2142651, Q000063806, Q000063807, Q000063808, Q000063812, Q63806, Q63807, Q63808, Q63811, Q63812, WQ63807, WQ63808, WQ63812.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 20 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Tod from West Springfield, MA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench set
Parts Used:
5303281154
Broken Dryer Belt
1st I pried the dryer top open then disconnected the two wires for the auto shut-off. Removed four nuts with driver that opens front and releases dryer barrel. Lifted front up a bit to remove from two lower tabs at bottom of unit and put aside.

I then slid the belt over the barrel noting the side up directions on the belt. On the lower left on the back of unit I opened up the vented cover to reveal the motor pulley and belt tension pulley. I put the belt on the pulley and brought the belt tension pulley over the belt. I then aligned the belt to the proper point on the barrel and reattached the front being careful to center the barrel onto the rim that is built into the front. Take care to align all the tabs and shims in the correct order so that barrel rotates freely. Replace auto shut off wires to switch on inside of front and close top.
21 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Patricia from Clifton Park, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Parts Used:
5303281154, 5303281085, 5303212849
Belt Broke
Very easy install. Removed the top and front of dryer, and put new belt on drum. Also replaced Idler Pulley (altho didn't really need to.)
I've had the dryer more than 20 years, so I am really glad such a simple repair will keep it going!
Parts arrived very quickly - great service from PastSelect!
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Tony from Flushing, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
5303281154, 137552900
belt broke
first I remove the top cover,then the front cover. Then slide in the belt. that it.
8 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Jerry from Hartselle, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
5303281154
Broken belt
My local repair parts shop did not have the part in stock. Shipping was really fast, so I repaired the dryer in less time than it would have taken if I had let my local shop order the belt for me. Repair was simple, just unplug dryer, pry up the front of the top, remove 4 screws from the top inside of front panel, disconnect two wires from door switch, pull front off, and slip belt around tub. Remove small panel on rear (2 screws), place belt around pulley and move tensioner in place. Reassemble front panel and rear panel.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
John from Rutherford, NJ
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
5303281154, 131390300
Belt broken, drum did not rotate, broken lint screen
First of all, check the feedback on your parts installation at partselect.com. You can learn alot and make the job that much easier. I simply popped the top lid on the dryer, remove the electrical connections to the front panel shut off, then removed the screws and popped the tabs for the front panel to install the new belt around the drum. I then opened the back louvered panel to loop the belt correctly around the pulley and proceeded to reinstall both the front and top panels. The lint screen is a simple two screw installation with little or no issues. Once installation was complete the dryer fired up and the drum began to spin once again. A simple repair done at a great savings!
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Ben from Weaverville, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
5303281154, 5303212849
Dryer drum would not turn
I first removed a vent cover in the back where the idler is located. With pliers I removed the tension off the spring. Next I simply slide the idler off the post. I pulled up on the top panel which opened like a clam shell. I used a flat blade screw driver to separate the front panel from the dryer so I could slide the new belt around the drum. I reversed the steps. All in all it was easy. It took me about 30min including cleanup.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
William from Pearce, AZ
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
Parts Used:
5303281154
Drive belt broke
Removed 4 screws from 8" service panel from rear of dryer removed panel
Removed 4 screws holding rear of dryer top, removed rear brackets. compressed spring retainers on front of dryer top, removed dryer top.
Removed 2 screws from inside of dryer front, removed dryer front.
Removed old belt, cleaned machine, installed new belt on dryer drum, inspected rear service panel to insure belt had reached the drive motor.
Reinstalled front of dryer, being sure to hold drum up in position to match front panel..
Went back to rear service panel and installed belt on motor pulley and tension pulley.
Set top back on dryer, test ran dryer for short time to ensure all was functioning properly.
Installed dryer top, and brackets.
Installed service panel.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
John from Temple City, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Socket set, Wrench (Adjustable)
Parts Used:
5303281154, 5303212849
broken belt and pulley
First of all, I've purchased a belt from local service center that cost me more than $21 (local tax is 8.5%). But, I can not find the idel pulley assembly so I searched on the Internet and ordered from PartSelect.com.

Surprisedly, my order came just one day - they must cross-ship from local distribution that it's even faster than to get those in local stores (driving .. and hope they have what I want ..).

I've replaced the belt 2 days ago - it's easy with 4 screws removed to pull out the front door. The back panel is opened with 2 screws remove, and very easy to replace the pulley.

It's a heavy duty gas dryer made in 1989 and this is the third time I changed the belt and the first time to change a new pulley. I would recommend to change the idle pulley because I may not need to change the belt if I have had replaced it last time. A broken or not functional idle pulley may damage the belt in a short time.

Appliance such as gas dryer like mine will last forever with replaceable belt and pulley. I'm really happy to see a working dryer (almost 20 years old) and my wife is asking a small component for her washer .. that I think I can easily fix that too .. with the help of PartSelect search.

Hope this will help.

John
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Robert from Philipsburg, MT
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
5303281154, 5303212849
worn belt and squeaky bearring
remove the top and front of the dryer, then removed the idler assembly. This enabled me to rimove the belt form the drum and replace it and the idler assembly. Not difficult at all.
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Jorge from Buena Park, CA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
5303281154
tumbler not turning
I took the front part off, then removed the old belt out and installed the new one in. Also fix the tensioner wheel (it had come off) After I posisoned / aligned the belt. Also cleaned the whole dryer with compressed air, it was really dirty and nasty, this dryer has not been cleaned in 20 years, overall I had a great experience with parts select, they send the parts real fast.

Tank you

Jorge Garcia, Buena park CA
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
3 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS459830
Manufacturer Part Number: 5303281154
Brand
Model Number
Description
Kenmore
417.88980100
Dryer - Kenmore Dryer Model 417.88980100 (41788980100, 417 88980100) Parts
Kenmore
41788988100
Dryer
Kenmore
41788988800
Dryer
Kenmore
41788989100
Dryer
Kenmore
41788989800
Dryer
Kenmore
41798988100
Dryer
Kenmore
41798988110
Dryer
Kenmore
41798988800
Dryer
Kenmore
41798988810
Dryer
Kenmore
41798989100
Dryer
Kenmore
41798989110
Dryer
Kenmore
41798989800
Dryer
Kenmore
41798989810
Dryer
Tappan
47-2707-00-01
Dryer
Tappan
47-2707-23-01
Dryer - Residential, Electric
Tappan
47-2828-00-01
Dryer - Residential, Electric
Tappan
47-2828-00-03
Dryer - Residential, Electric
Tappan
47-2828-23-01
Dryer - Residential, Electric
Tappan
47-2828-23-02
Dryer - Residential, Electric
Tappan
47-2828-23-03
Dryer - Residential, Electric
Tappan
47-2848-00-01
Dryer - Residential, Electric
Tappan
47-2848-00-02
Dryer - Residential, Electric
Tappan
47-2848-00-03
Dryer - Residential, Electric
Tappan
47-2848-23-01
Dryer - Residential, Electric
Tappan
47-2848-23-03
Dryer - Residential, Electric
Tappan
49-2707-00-01
Dryer - Residential, Gas
Tappan
49-2707-23-01
Dryer - Residential, Gas
Tappan
49-2827-00-01
Dryer - Residential, Gas
Tappan
49-2827-23-01
Dryer - Residential, Gas
Tappan
49-2828-00-01
Dryer - Residential, Gas