This heating element, used in any range/oven, is an open-style bake element. It is placed at the bottom of the oven and supplies heat. If your baking element does not supply consistent heat or is burnt out, then replacing the element is the solution to this problem. This heating element is a 19-1/4 inches wide by 15 inches long. The push-on male spade terminals are 13-3/4 inches apart. The tools needed for this replacement are: a screwdriver and needle-nose pliers. The first step in is to unplug the range or shut off the house circuit breaker before starting. Unscrew the back of the oven cavity to pull out wires from the defective element. Reconnect wires to the new element and screw it back.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly | Will Not Start
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mark B - June 7, 2024
Verified Purchase
Part worked as expected
part was as described and install was simple
★★★★★
★★★★★
Thomas B - March 9, 2024
Verified Purchase
Easy fix, correct part.
Fit perfectly, arrived undamaged, oven back in service. ThankYou!
★★★★★
★★★★★
Ross B - March 22, 2023
Verified Purchase
Oven element
Part fit and arrived in a timely fashion. Will use part select again.
★★★★★
★★★★★
Mark M - January 8, 2022
Verified Purchase
worked as expected
took just a bit longer than hoped to receive part. part arrived and installed. worked great.
★★★★★
★★★★★
John H - January 11, 2021
Verified Purchase
oven Repair
Ordered part on Christmas and got it on Thursday. Good service, proper part.
★★★★★
★★★★★
Edward R - January 6, 2021
Verified Purchase
Easy repair
??
★★★★★
★★★★★
Paul M - December 5, 2020
Verified Purchase
Oven element Repair
The website allowed me to easily identify the heating element i needed to repair my oven. i ordered it and it came within 6 days and it worked great.
★★★★★
★★★★★
Perry M - November 18, 2020
Verified Purchase
Part fit exactly as promised Repair was easy.
The part came quicker than I expected. The installation took about 5minutes and the part worked. Tenants were happy and so was I. I used one tool from my tool belt. No muss no fuss..
Thanks again to you folks; The family can cook their Thanksgiving feast.
★★★★★
★★★★★
William M - October 22, 2020
Verified Purchase
Easy to install!
The heating element fit perfectly and was easy to install.
★★★★★
★★★★★
ERIN P - August 1, 2020
Verified Purchase
Just what I needed and fast too
You guys had it out the day I ordered and it was a nice experience...
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 108 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Shorted out baking element.
Took out bottom drawer and unplugged power cord, slid unit out to reach back panel,removed front door( 2 Phillips screws) making it easier to reach back of oven, removed screws inside of oven holding element in place, took plate off rear and removed the spade connectors with needle nose pliers. Slid new element into oven and replaced scr
... Read moreews inside of oven. Connected the two spade wires on the back and replaced rear panel. Slid unit back in place and plugged the 220v power cord back in. Straightforward and very simple! It took 3 times longer to clean the oven while it was disconnected than it did to replace the element.!
Read less
Monty from WILKESBORO, NC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace baking element in stove
unplug old baking element using socket tool and put in new baking element - very simple and it works!
gene from SANDUSKY, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element shorted out
Bake element went back in very easy. However still wouldn't work. Called repairman and computer chip was shorted out as well. Additional $250.00 later stove works.
Bradley from Palm Springs, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Baking element cracked
Removed the baking element with a nutdriver. Slid it to the front of oven and removed the contacts on the back side. Installed the new element and installed the contacts at back of element. Slid it in the holes on back inside of oven and used a nutdriver to install the screws. It was very simple to do.
Mark from Dayton, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Bake Element
followed your directions - excellent
Andrew from Chadds Ford, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out baking heating element in oven
Removed element by loosening two screws, disconnected heater element and connected new element and reattached to oven wall. Turn on oven to check for heater to work. Confirmed heater worked. Repair complete.
Locating part on web site, ordering, receiving next day & installing was very very easy. Information provided on PART SELECT web site and that provided with part made this a very easy and cost effective repair. With service provided by PART SELECT there is no reason to pay for an expensive service call in addition to what a repair company
... Read more would charge for the part.
Read less
William G from Valdosta, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
surface burners would not work
installed terminal block kits and burners worked great
I pulled out the stove from the wall and unplugged it. I then used a socket set with a long extension which made it easier to reach the rear wall of the stove. After removing the screws i gentle pulled the element forward and exposed the clips and wires. I removed the clips. The wires seemed to want to slip back into the hole so I used cl
... Read moreothes pins to hold them in place. After I received the new element (Two Days) I reversed the process. Using a socket set it is very easy to tighten the screws to much. Be careful to just snug the screws. I plugged the unit back in and slid it back in place and turned it on.
Read less
steven from EPPING, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower unit broken, arcing
unscrewed rear connections, removed broken element, installed new
Mark from Edgartown, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
31 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shirley
February 12, 2019
Hello, i have a Frigidaire stove and need the oven heat element replaced. I do not know the model # and cannot find it any place on/around or under the stove. Is there a Generic heating element that will fit?Thank you
Hi Shirley,
Thank you for your question. If you are looking for the heating element for your stove, you may be able to find it on our website. Under Appliance Parts For on our website, you will find icons of various appliances. Click on the stove icon and the next page that comes up will allow you to choose the brand of the stove, the part you are looking for, the size, the material the part is made of and the color of the part. This will allow you to narrow the search for the part you are looking for. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Carol
November 30, 2017
The part #ps453960 says it is a 240v, my oven is a 220v is the element compatible?
For model number ps453960
Hi Carol,
Thank you for your question. Before we can assist you further we would need the model number from your appliance. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Lisa
April 24, 2018
I can't find the replacement heating element for my model. Is there a compatible part i can use
For model number Rg35hw2
Hi Lisa,
Thank you for your question. The part number listed under your model number for the bake element is PS453960. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Andrew
October 16, 2019
Do you carry the replacement bake element and large coiled stove top element? What are the part numbers. Its for a Kenmore
For model number 970-515822
Hello Andrew, thank you for inquiring. I was able to locate a parts list for your model range, and the replacement Bake Element for it is part number PS438018. The replacement 8" Surface Element for it is part number PS2339242. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
December 24, 2019
I am looking for the top oven element for model number 970C648520. They say they do not have that model.
Hi Linda,
Thank you for your question. We do not have your model number listed on our website, but we were able to find the information for you online. The part number listed under your model number for the broil element is PS439673. We hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Marlene
December 6, 2017
Do you have a heating element for my model ? It’s a Frigidaire
For model number RG35AW
Hi Marlene,
Thank you for your question. Yes, this would be the correct bake element for your appliance. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Yolanda
April 29, 2019
Frigidaire oven. I need a new element on bottom of oven
For model number FEF366ECD
Hello Yolanda, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS438018. Hope this helps!
Will this fit the model # of my stove, to replace the heating element.
For model number Cwef310gsc
Hello Denise and thank you for writing.
No, but bake element part number: PS438018 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Debbie
August 13, 2019
Is this bake element for the self cleaning Frigidaire oven? Thank you.
For model number CFEF366EMK
Hello Debbie, thank you for contacting us. This Bake Element is not shown as compatible to your model. The replacement for your model is part number PS438018. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jemma
July 30, 2019
Help! Do not know what element to order. Is this compatible with my Kenmore range?
For model number 970-606020
Hello Jemma, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
