Easy
451031-1-M-Frigidaire-5300622032 -Heating Element Restring Coil with 1/4" Terminals
Part Location Diagram of 5300622032 Frigidaire Heating Element Restring Coil with 1/4
See part 17 in the diagram
451031-1-S-Frigidaire-5300622032 -Heating Element Restring Coil with 1/4" Terminals 360 view
( Grid squares measure 1x1 inch )
451031-1-S-Frigidaire-5300622032 -Heating Element Restring Coil with 1/4" Terminals 451031-2-S-Frigidaire-5300622032 -Heating Element Restring Coil with 1/4" Terminals 451031-3-S-Frigidaire-5300622032 -Heating Element Restring Coil with 1/4" Terminals 451031-1-S-Frigidaire-5300622032 -Heating Element Restring Coil with 1/4" Terminals 360 view
Part Location Diagram of 5300622032 Frigidaire Heating Element Restring Coil with 1/4
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Heating Element Restring Coil with 1/4" Terminals 5300622032

Rated by 10 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

Easy 

30 - 60 mins 

Rated by verified customers 

?
0% OFF
$ 30.84 $ 30.90
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS451031
Manufacturer Part Number 5300622032
Manufactured by Frigidaire for Frigidaire, Gibson, Tappan, Kelvinator

Jump to:

Product Description

Heating Element Restring Coil with 1/4" Terminals Specifications

This part is located behind your dryers drum.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Dryer.
Part# 5300622032 replaces these:
AP2135127, 3042, 08015672, 3202787, 3281114, 5300622032, 8015672, NQ00622032, Q000622032, Q622032, WQ622032
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.2 / 5.0, 10 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
NO HEAT& drum not moving
googled frididaire dreyer parts
found Partselect
ordered parts {they were here in less time than what they stated}
watched Film {very helpful}
Me and My son installed both parts less than 1 hr.
VERY HAPPY WITH PARTS AND SERVICE
Will order from PartSelect when something else Breaks
VERY happy
Dave..
Other Parts Used:
Rear Drum Bearing Kit Heating Element Restring Coil with 1/4" Terminals
  • David from Brooksville, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Auto Dry would not cut off and took long time to dry.
1. I disconnected power cord
2. I used putty knife to loosen top by pressing into
the front spring clips holding it down and lifted the
front of the lid up against the back hinges and leaned
it back against a wall at the back of the machine.
3. Then I unscrewed the two screws at the top of the
inside of the front panel edges and unclipped the
wires from the door switch and then crimped the
metal clips holding the front panel to the main
body sides and then leaned the top of the front panel
toward the front and lifted it out and put it aside.
4. I then went to the back of the machine and undid the
two screws holding the motor area access panel and
took it off and put it aside. I then released the drum
belt tensioner and moved the belt away from the motor
pulley.
5. Then I removed the drum by lifting up on it so that the
ball axle could be pulled outward and then proceeded to
take the belt off and work the drum out of the front
panel opening and put it aside.
6. Once the drum was removed one could see the heating coil
assembly attached to the inside back of the dryer. One
needs to take off the two wires attached to the coil
spade connectors that are located at the ceramic
insulator. I decided to take out the whole assembly by
undoing the four screws at the outside back of the dryer.
7. Once the assembly is out of the dryer, then it becomes
necessary to remove the spade terminals from the
ceramic insulator, One must unbend the metal flanges
that have been bent at the base of the spade coneetors
at the surface of the insulator and then pull out the
spade connectors. Once this is done, then one can
unconnect the coil from the ceramic insulators holding it
to the assembly. Once the coil is disconnected one can
put in the new coil into the ceramic insulators, insert
the spade connedtors into the insulator, bend the
flanges to retain it and then reverse the disassembly
sequence for the assembly to complete the job.
Outcome,(I saved the old coil in case I need it in the
future.)
Outcome
Read less
  • Peter from Harrngton, DE
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Scratching noise, wouldn't heat
First make sure dryer is unplugged.Next beware of sharp edges, this dryer has plenty. Remove 2 screws from kick panel,remove kick panel. Lay the kick panel aside, it makes a good "bowl" to hold screws.Remove 2 screws from top, located on back,remove top.Unplug the 2 sets of wiring connecting the front panel, the zip tie has to be unzipped, and if stripped should be replaced when reassembling. Remove 2 screws inside cabinet that hold front panel, near top. Remove 2 screws that hold front panel, in front and at bottom of front panel. Front panel is held in place by spring loaded clips, remove by pulling outward,a putty knife may be slid in to persuade it to pop off, be careful of scratching paint. There is a small panel on the back of the dryer held by 2 screws, remove to access the pulley that maintains tension on belt and release belt. Pay attention to the belt route through the tensioner to insure eaiser assembly later. Remove nylon drum retainer in front of cabinet at top, held in place by 1 screw. The drum may be lifted out and placed aside to access the heating unit(Don't place it on a hill, HaHa). The entire heating unit may be replaced, I opted to replace just the element, as it is much cheaper.
Use a flat screw driver to slip old female plugs off male element plugs, Use needle nose pliers to flatten tabs that hold male plugs of element in the ceramic housing. Remove old element, being careful not to damage any of the insulators. If the new element is not stretched out to about 46 inches "relaxed", carefully stretch it. Place one insulator slightly off-center on the element and place it into element housing. Plug in element into ceramic plug housing and bend the tabs to retain it. carefully begin putting in insulators, one at a time and reattaching element. Do not bend the element or cause any of the coils to touch each other. When all insulators are in place, plug in element and assemble dryer in reverse order. Mke sure belt is oriented with grooved side facing drum, and reach through the rear access panel to run belt through tensioner, make sure spring is attached with s-hook ends and belt is properly threaded. Reaasmble in reverse order, being careful to make sure drum bearing is seated properly, and drum "ring" of front panel is centered in drum. After dryer is assembled try it out on cool and work your way up to hot, and let it run a few minutes to get rid the new smell. Hope this will help.
Read less
  • Richard from Pleasant Garden, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bearing had worn and heat element broke
pulled dryer apart removed drum replaced bearing ass. and heat element and then put it back together. works great now. no squealing and heating great.
Other Parts Used:
Rear Drum Bearing Kit Heating Element Restring Coil with 1/4" Terminals
  • Chris from Dothan, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat when running.
First of all I would like you all to know that I cheated just a bit. I had SEARS come out and tell me for sure what the problem was, as they took my dryer apart a payed close attention to everything they did. After I was told that it would cost me over $200 (on top of the $109 I just payed for them to tell me what was wrong) to fix the heating element. I replied with a "NO THANKS!", I also told them not to worry putting it back together. It seemed like he was very happy to hear that and thought I was going to buy a new dryer, he even gave me a coupon for a whole 10% off if I spend over $400. After spending 10 minutes or so on line I found the part I needed @ Partselect.com (plug-plug) for like $20. Once I received the part it took all of 15 minutes to take of the old and put on the new. First: Make sure power is off by unplugging or turn off breaker (can't finish a project if a project finishes you)! Second: Find the two power lines sticking out at about four o'clock and disconnect. Third: Unscrew porcelain separator and remove the two coil ends before removing the coil it's self from the arrow like holders. Forth: reverse last three steps with care (coil feels like it could break easily). Fifth: Place drum back in it's setting while making sure that the drive belt that turns drum is placed around motor pulley. Sixth: Button it up the way you pulled it a part. and your done, good luck!
Read less
  • JASON from SOUTH BEND, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drum bearing broke, and heating element was bad
popped the top off dryer, removed the tub . took the screws out of the tub bearing, and put the new one on. replaced the rear bearing holder. filled with greese provided.replaced the heating element, and put the tub back in with the belt around the tub. replaced the lint screen. put the belt around the pulley and replaced the cover. popped the top down.good as new
Read less
Other Parts Used:
Rear Drum Bearing Kit Heating Element Restring Coil with 1/4" Terminals Lint Screen and Frame
  • ROBERT from LANDRUM, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer wouldn't heat
1. Lift the dryer top off to get to the two screws holding the front of dryer. 2. On the back bottom left of the dryer, remove the vent so you can get to the tension pully to loosen the belt around the drum. 3. Remove drum. 4. Disconnet element coil from wires. 5. Carefully remove element coil from ceramic holders. 6. Get new element coil and attach to wires while carefully keeping coil loose and untangled. 7. Again, carefully restring coil into ceramic holders without springing the coil making it misshapen. Once all of the coil is in the holders, retrace your steps. 8. While you have the appliance open, it's a good time to vacuum out all lint to prevent a fire from occuring. 9. REMEMBER TO ALWAYS UNPLUG THE APPLIANCE BEFORE WORKING ON IT!
Read less
  • Gaylena from Monroe, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer was working, but not drying the clothes.
First, I liked for a reset switch, because I guess some dryers have one. It seems mine doesn't. So that didn't work.

Next I cleaned out the lent build up everywhere. I would suggest doing this if you have a problem or not. It ended up being very little work for great return.

Heating Element had actually broke in half, so I ended up needing to replace it. Really unhooking the little electric prongs was the worst part. The have little tabs that bend down to hold them in place, and they don't really bend back up. So you have to break them out. The only thing with the coil is to make sure it doesn't touch the pan.

I put a new built on only because I had everything open, and had know idea how old it was. It was not hard really. You just need to pay attention to how the old one wraps through everything before taking it off. If it was shredded, and you didn't get to see it first, well then good luck.
Read less
Other Parts Used:
Drum Belt Heating Element Restring Coil with 1/4" Terminals
  • Jeff from Oklahoma City, OK
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
did not dry
unscrewed the front panel,dissconect wiring and unscrew drum , just the 3 center ones do not unscrew the outer screws inside the dryer ,take belt off and pull drum out. unplug old element ,replace heating element. the most difficult part is to replace drum and screws,for best results screw one, turn drum and make the screw in six o clock position with each one so the weight of the drum does not fight you
Read less
  • nelson from cape canaveral, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bearing and heating element broke
Had to first remove the top of the dryer this was done by removing the clamps on the back. Next I removed the front of the dryer by removing the two nuts the frong in the inside, these are somewhat hard to reach. Next the drum was removed. then the heating element shield. Replaced, the heating element then secured it into place. replaced the drum bearing assembly, and put back together.
Read less
Other Parts Used:
Rear Drum Bearing Kit Heating Element Restring Coil with 1/4" Terminals
  • Kevin A Frech from Sidney, IA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
65 of 91 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Rear Drum Bearing Kit
$24.89
  In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
  In Stock
Produce Preserver Filter
$21.50
  In Stock
Affresh Cleaner
$19.09
  In Stock
Cooktop Cleaner
$17.74
  In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
$21.14
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS451031
Manufacturer Part Number: 5300622032
Brand
Model Number
Description
Tappan
47-2707-00-01
Dryer
Tappan
47-2707-23-01
Dryer - Residential, Electric
Frigidaire
7208A
Dryer - ELECTRIC DRYER
Frigidaire
7347A
Dryer - ELECTRIC DRYER
Frigidaire
DE150EDD1
Dryer - Electric
Frigidaire
DE150EDD5
Dryer - Electric
Frigidaire
DE150EDF1
Dryer - Electric
Frigidaire
DE150EDF5
Dryer - Electric
Frigidaire
DE150EDH1
Dryer - Electric
Frigidaire
DE150EDH5
Dryer - Electric
Frigidaire
DE150EDV1
Dryer - Electric
Frigidaire
DE150EDV5
Dryer - Electric
Frigidaire
DE150EDW1
Dryer - Electric
Frigidaire
DE150EDW5
Dryer - Electric
Frigidaire
DE150JDD1
Dryer - Electric
Frigidaire
DE150JDF1
Dryer - Electric
Frigidaire
DE150JDH1
Dryer - Electric
Frigidaire
DE150JDV1
Dryer - Electric
Frigidaire
DE150JDW1
Dryer - Electric
Frigidaire
DE2000D-L1
Dryer - Residential, Electric
Frigidaire
DE2000D-W1
Dryer - Residential, Electric
Frigidaire
DE250EDD1
Dryer - Electric
Frigidaire
DE250EDD5
Dryer - Electric
Frigidaire
DE250EDF1
Dryer - Electric
Frigidaire
DE250EDF5
Dryer - Electric
Frigidaire
DE250EDH1
Dryer - Electric
Frigidaire
DE250EDH5
Dryer - Electric
Frigidaire
DE250EDV1
Dryer - Electric
Frigidaire
DE250EDV5
Dryer - Electric
Frigidaire
DE250EDW1
Dryer - Electric
Back to Top
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 9pm EST

Contact Customer Service
Heating Element Restring Coil with 1/4" Terminals
0% OFF
$ 30.84 $ 30.90
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.