Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
John M - July 31, 2021
Verified Purchase
part fit perfectly
There are 3 10-32 stainless screws holding this part on. In 10 years this is the second one where the screws came loose. And wiped out the heating coil. This time I put it together with red lock tight.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Seth
February 23, 2024
Does the concaved opening go towards the heatinf element or does the flat end go towards the heating element?
For model number FER641FS0
Hello Seth, thank you for contacting us. Based on our research, the heating element goes in the concave side of the baffle. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
December 30, 2017
How do you replace the baffle? The dryer makes noise when it starts and when it stops. A thumping noise occurs. I replaced the drum bearing with kit, it still does it. You can turn the drum by hand and you can hear it. Any help would be welcome. Thank you.
For model number gler331as2
Hello Bob,
Thanks for your question. This issue is likely arising from the lower felt seal (part number PS832645) and the upper felt seal (PS832644) rather than the baffle heater.
I hope this helps.
I replaced every part except motor and blower assy. Still makes a noise when it starts and stops what can it be?
For model number gler331as2
Hello Bob, Thank you for your inquiry. You can test the drive motor with a multimeter to see if it has continuity. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
