Natural Gas Top Burner Orifice - 5,000 btu 316237903

Hello Joe, thank you for your question. To convert back to Natural Gas you will need to replace the Top Burner Orifice, PartSelect Number PS439994, PartSelect Number PS439992 and PartSelect Number PS439993. For the Oven the Safety Valve can be adjusted back to NG. We hope this helps!

Hello Robert, thank you for your question. Usually the unit is sold as Natural Gas. When you remove the orifices to put on the conversion kit you keep the orifices in case you need them in the future. If the original Natural Gas orifices are lost, then you must purchase the part that the orifice goes on. So your this unit, there are several Natural gas Igniter/Orifice assemblies. They are PS1528102, PS2345227, PS1150735, PS2332312, PS1528422, PS1528421 and PS1528423. We hope this information will help you.

Hi Diane, thank you for your inquiry. There is no conversion kit for the natural gas orifices. You will need to purchase four of them. The natural gas orifices are part of the orifice holder and tube assemblies. You would want to order one front burner igniter/orifice assembly part number PS2332312, one front burner igniter/orifice assembly 14K part number PS899768, and two rear burner igniter/orifice assemblies part number PS2342686. Good luck with your repair!

Hi Sharon, thank you for your inquiry. The natural gas orifices for your model are: right front burner orifice, part number PS439991, right rear burner orifice, part number PS439994, and left front, left rear and middle burner orifice, part number PS439993. We hope this information helps!

Hello John, Thanks for your question. You will need the original orifices for your model to revert it to natural gas. The part number PS439994 is not compatible with your model but part numbers PS439991 and PS439993 are. I hope this helps.

Hi Harold, Thank you for the question. The orifices for this model are only sold as part of the Burner Assembly. Part Number: PS11770472 and Part Number: PS11770471.Hope this helps!

Hello Mark, Thank you for the question. You will adjust the orifices inside the oven to convert them and flip the regulator to NG. Hope this helps!