Clock Overlay - White 316220804

Hello Kady, thank you for your question. The "wings" or mounting tabs on the control board are not sold separately. The board would have to be replaced which is part number PS977489. The overlay that sits in front of the board that have your selection options is part number PS439806 and should probably be replaced with the board. I hope this helps!

Hello Steve, thank you for your question. There is a trim piece under the control panel that should be removed, then each side end cap on the control panel (or end caps first, then trim, depending on your model). Once those parts are off, the screws behind the knobs are removed and the control panel frame can be removed. I hope this helps!

Hi Connie, Thank you for your question. It does sound like it is your electronic board that is the issue. I would suggest unplugging your appliance for about 5 minutes and then plug your appliance back in. Sometimes that will reset the board and fix the issue. If it does not, you may need to replace that part. Good luck with your repair.

Hello Kelvin, that is a great question. This part does not need to be programmed, just have to install it and turn the power back on. Hope this helps!

Hey Frankie, thank you for your inquiry. We have researched your model and found that if the cover is damaged or the labels are erased from the surface of the overlay cover, then you may need to replace it with part number PS439806. But if your controls are not working, and the clock is dimmed, or not showing anything, then you may need to replace the electronic control panel, part number PS820812. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.