Frigidaire/Frigidaire_Thumb/MOHEIM5W.gif
See part 66 in the diagram
Replacing your Frigidaire Range Broil Element play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Broil Element

★★★★★
★★★★★
10 Reviews

Rated by 5 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 137.56   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 60462050C!
 Fits your 60462050C!
PartSelect Number PS439671
Manufacturer Part Number 316203200
Manufactured by Frigidaire
You May Also Need?
Product Description

Broil Element Specifications

This broil element is located on the top inside the oven.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when broiling | Little to no heat when baking
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Tappan.
Part# 316203200 replaces these:
AP2126395, 832973, 316203200, 316199900
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
DAVE BRYCE
May 16, 2019
How do you test for what part you need no heat in oven broil or cook they do not work
For model number CFEF312FBB
Hello Dave, thank you for your question. First you will unplug the unit and remove the elements to test them. With a multimeter test for continuity on the elements. If there is no continuity the elements have to be replaced. Then test the oven sensor probe PartSelect Number PS11731754. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If the sensor tests within those ranges, the electronic board should be replaced. I hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Tammy
August 5, 2019
Where is the broiler on this oven? And what is the bottom drawer used for?
For model number FEF365BDW
Hi Tammy, thank you for your question. The broiler is the element at the top of your oven. It looks like your drawer is a storage drawer. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Frigidaire Range Broil Element

Replacing your Frigidaire Range Broil Element play video
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 5 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Top Broiler element burned out
I disconnected power cord. Removed cooking racks. Removed element mounting screws. Removed back panel and removed wires on both ends. Pulled element out put new one in and bolted down. Reconnected wires. Put rear cover on. Plugged in and checked for correct opreation. OK!
  • Richard from Alexander City, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set
40 of 53 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom elerment burnt into
First i removed the two screws that hold the element
in place. I the pulled the element out about 3 inches and disconnect the 2 wires. The new one didn't come with the little holders at the front of the element and were very hard to get loose from the old element .i finally got them back on the new one and put it back in the stove. Pretty simple job though.
  • Danny from Gaffney, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broil element was bad.
It was a little difficult by my self an extra hand would of made it much easier.I unscrewed the screws pulled the wires from the back of the oven which took a few minutes.I am not great at fixing things but once I got the old one out it went smoother than I expected.it took about 25-30 minutes with an extra hand could have made it 10 minutes.not bad over all for me.did I mention not very handy.did stun the wife that I fixed it on my own.thanks Bill
  • William from Fort Myers, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler broke apart in pieces. Also we found an round honeycomb part
in the bottom of the oven when I was looking to see what was going on. My husband did the repair just as the video described. I suspect this part honeycomb round maybe ceramic piece goes over where the heat is vented from the oven. Where do I get another one of these and how does it attach in the oven-under the burner. HELP I tried to look on the schematics and did not see anything. The repair went fine, except when we turned everything back on it did not work. Then my husband remembered he forgot to plug the new part IN. Once plugged in it is working fine. Thanks
  • Betty from KNIGHTDALE, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electrical connection pulled off the element
When I pulled the element out of the back panel of the oven to remove it, the electrical connection got caught on the edge of the hole in the panel and disappeared back into the oven insulation. It was difficult to find and pull it back out to reinstall it on the new element.
Other Parts Used:
Oven Bake Element
  • Carla S from WAYNESBURG, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.3
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    3
  • 3 Stars
    2
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS439671
Manufacturer Part Number: 316203200
Brand
Model Number
Description
Frigidaire
00462048A
Range - Range
Frigidaire
00462048B
Range - Range
Frigidaire
00462048C
Range - Range
Frigidaire
00462048D
Range - Range
Frigidaire
20462052A
Range - Range
Frigidaire
20462052B
Range - Range
Frigidaire
20462052C
Range - Range
Frigidaire
60462050A
Range - Range
Frigidaire
60462050B
Range - Range
Frigidaire
60462050C
Range - Range
Frigidaire
60462050D
Range - Range
Kenmore
79015011400
Range
Kenmore
79015021400
Range
Kenmore
79015031401
Range
Kenmore
79060042400
Range
Kenmore
79060042402
Range
Kenmore
79060042403
Range
Kenmore
79060042405
Range
Kenmore
79060201200
Range
Kenmore
79060201201
Range
Kenmore
79060301300
Range
Kenmore
79060702902
Range
Kenmore
79061130101
Range
Kenmore
79061130103
Range
Kenmore
79061131100
Range
Kenmore
79061131101
Range
Kenmore
79061131102
Range
Kenmore
79061750100
Range
Kenmore
79061750102
Range
Kenmore
79061750103
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service