Will Not Start | Gas igniter glows | but will not light | Element will not heat
This part works with the following products:
Range, Cooktop.
Part# 316011200 replaces these:
AP2123862, 464, 316011200, 5303311262
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
3.8
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
1
2 Stars
1
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jon P - June 11, 2020
Verified Purchase
Easy repair. Part worked.
It was about as easy I expected it to be.
★★★★★
★★★★★
Louis K - January 28, 2019
Verified Purchase
not a great expereince
I received the correct part but with no explanation on what I had to do. When I tried to disassemble the burner to get to the igniter, I broke off screw and could not afford to break another since PartSelect did not have new burners for sale.
★★★★★
★★★★★
Annie B - October 25, 2018
Verified Purchase
Couldn't be installed
I hired a repairman to install the igniter but he realized that most of the bolts that attach the burners to the stove top were too corroded to remove and would have to be drilled out, requiring the burners to be replaced as well. I'll be returning the igniter for a refund.
October 26, 2018
Hello,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
★★★★★
★★★★★
Sako K - October 17, 2018
Verified Purchase
Perfect parts
Very happy with the parts
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.6 / 5.0, 7 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
bad igniter electrode on rear left burner
If you intend to replace the igniter electrode ( part no. PS436633), purchase a minimum of twelve (12) top burner mounting screws ( part no. PS437925).
I also recommend that you replace all the electrodes since you have gone to the lengths described below to replace one igniter electrode.
After time, the heads of the
... Read more mounting screws become brittle and break off when attempting to remove them with a 3/16" socket or nut driver.
Be aware that even the new screws are not exactly 3/16 hex, nor do they truly accept a 4.5 mm, or 5 mm socket. The 5 mm has to much slop, and the 4.5 mm, and 3/16" do not fully seat over the head.
First unplug the stove, and turn off the gas.
To remove the broken screws, I had to use a hand grinder to grind the heads off (you could be as careful as possible, but you will still damage the porcelain finish of the range top.) Unfortunately every screw has to be removed to lift the range top up enough to gain access to the electrode(s).
Along with the broken screws being in the burner casting, to replace the electrode, you have to remove the burner to work on it. Remove the insulated wire from the electrode, and then the gas line to the burner.
I recommend inspection of the insulated wires to see if they may be grounding out to the stove body. With the top removed and the burners still in place, plug the range back in. Turn any knob on (all electrodes should spark at the burner accept the bad one(s)). Observe the wires to see if there is sparking to the stove body. If there is none, continue to replacement instructions. If a wire is sparking to the body, wrap the damaged wire with HEAT RESISTANT tape. Standard vinyl electrical tape won't withstand the heat.
To remove the burner from the gas line, use a 1/2" open end wrench (preferably a tubing nut wrench) to remove the gas line along with an adjustable wrench to hold the burner to prevent damaging the gas line.
If your lucky, the cross point (Phillips head) screw that secures the electrode will remove without stripping, but don't count on it. I had to grind those screw heads off as well.
I used a size no. 30 cobalt drill in my drill press to attempt to remove the broken off screws, but because of the screw/drill size, I could not keep the bit on the hardened screw center, it kept walking off center. I ground the screws flush to the burner surface, used a center point drill, a center punch, and a spring loaded set point punch, nothing worked to keep the bit from wandering off center and into the soft metal casting.
I had to drill new holes with the no. 30 drill bit just to the right (or left) of the existing holes. Keep the same orientation and mounting distance when drilling, either to the right or to the left.
The new burner mounting screws did not work for mounting the electrode to the burning, I used small no. 6 self tapping screws to mount the new electrodes to the burner casting (the washer head was to large).
Reconnect the gas line(s) to the burner(s). It will be necessary to carefully bend the gas lines so as to line the new holes up with the top when remounting the burner(s).
If I had it to do over again, I would just donate the range as is, while explaining the problem to the donation center. After my experience, I personally don't think it is worth the trouble of replacing the electrodes on a range this old.
Hope this helps.
Read less
Michael from SHELBYVILLE, TN
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
TOP BURNER IGNITER
A BIT DIFFICULT - Un-Plug 120v cord - Turn off gas - The Screws that Burners to top were frozen. Putty knife to release top spring clips - Carefully - Lift top up 4 inches - Use a short piece of 2' X 4" to hold top up - Remove wire from bad igniter - Remove 1 phillips screw that holds Igniter - Install new part - reinstall igniter wire -
... Read moreClose Range top lid - Turn on gas - Plug 120v back in - Test Burners = Done! If You Are Not Comfortable With This Kind Of Repair On A Gas Appliance - STOP! And call a qualified Repair Tech.
no need to remover burner. Lift top up use a 1x4x5" to hold top up. Use short #2 screw driver remove screw and replace with new igniter
Terry from Wilkinson, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
12 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter replacement
Burner set screws froze up, was able to break 2 of 3 free and broke 3rd off. Used new simular screws to re- thread and fasten burner back in place. Bit of work but everything working. Used oppertunity to clean and re-level while I was at it. Everything good to go.
David from Livingston, MT
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
9 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad igniter.
The stove was older so the burner was hard to get out. The small screw heads broke off, so I had to carefully center punch and drill out the screw bodies. The igniter screw was also frozen in the pot metal burner. That screw requied drilling and tapping with the installation of a new 6-32 screw. Once the burner was refurbished, the igni
... Read moreter mounted easily. Afte attaching the gas line and igniter wire, the burner worked great.
Read less
chris from Venice, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
16 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken inner door glass, broken igniter, and the bottom oven panel was rusted
First, I want to say how WONDERFUL your service was. I needed more info on a part and your phone rep. e-mailed me a picture of the part from which I was able to be sure it was the right part. I ordered the pard one day and they were delivered to my door the NEXT DAY....talk about service!!!
My husband did all the replacing
... Read more, he had no problems with any of the 3 items he replaced, he said they were all easy to replace. They all work great. Thank You!!
Igniter porcelain was cracked and burner would not light.
un-pluged stove,removed the one screw holding the broken igniter. disconected the one wire. installed new igniter and slipped on wire. The igniter came with a new bracket, the old one rusted away which is why the old igniter broke.
Rusty from Howell, NJ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
53 of 76 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
9 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lance
October 3, 2019
Knob on one burner does not activate igniter, however, 4 of the 5 burners work to activate all igniters.
For model number bggf3042kfv
Hello Lance, thank you for your question. We would recommend checking the surface burner electrode, and if the tip is worn down, or corroded we would recommend replacing it. When only one burner doesn't spark at the burner itself, that is a good indicator that the electrode is bad. If replacing that part doesn't fix the issue, we would recommend testing/replacing the PartSelect Number: PS11775689 spark module and the PartSelect Number: PS3409151 spark switches. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Juan Jaimes
February 9, 2018
What tool i have to use to remove the screw that hold the igniter electrode?
For model number Tappan, model#TGF336BHWE
Hello Juan, Thank you for your inquiry. You would need a Phillips screwdriver to remove the screw. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Juan
February 11, 2018
The screw that hold the igniter electrode has an square slot on its head, i can not use any screwdriver to take the screw off. If you know what kind of tool to use,please tell me.
For model number Tappan-model#TFG336BHWE
Hello Juan, thank you for your question. If the screw holding the igniter into place is not a Phillips head screw, and has a square hole, use a square head screw driver to remove that part. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lindsay
July 10, 2019
I am looking for a spark igniter for my gas range, front right burner. I have a picture of it if you need . I am having troubles finding the correct part.
For model number CPGF3081KFN
Hello Lindsay, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2368574. I looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Hello Chris, thank you for your question. Unfortunately, that will not work. The igniters for this unit are only available by ordering the corresponding Surface Burner Igniter and Orifice Holder. I hope this helps!
Was this helpful?
Thank you for voting!
Janet
May 2, 2022
Does this fit my model?
For model number Ffgf3047lsf
Hello Janet, thank you for your question. No, the part you had chosen is not compatible. The correct parts are Front Right is PS2345282, Right rear PS2345283, Left Rear PS2332708, Left Front PS2332710. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Hello Frank, Thank you for the question. The Surface Burner Igniter Electrode for this model are only sold as part of the Surface Burner Orifice Holders. The Electrodes are not sold separate. We hope this helps, good luck with this repair!
How do I remove the 8-inch square cover over the burner?
For model number 790.75903992
Hi Eston, Thank you for the question. Once you remove the grates and the cap the square pan should just lift up and off the cooktop. Hope this helps!
Was this helpful?
Thank you for voting!
Richard
October 16, 2019
Top burner ignighters only work on one burner on our gallery seiries gas oven. When i try it infighter,, the ignition sound comes from the only burner that works.
For model number 119336
Hello Richard, thank you for writing. We would be happy to look into this, but we will need the model number for your range to do so. Here is a link to some tips on our website for locating the model number for your range: https://www.partselect.ca/Find-Your-Range-Model-Number.aspx. Also, could you please indicate which specific burner is not functioning correctly? Thank you, and we look forward to hearing back from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":3,"name":"316011200","title":"316011200","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
