The front drawer glide is designed to help the bottom drawer on your range slide in and out smoothly. If the drawer is not operating as intended, or the drawer will not close all the way, the front drawer glide may require changing. Luckily this is a very easy repair, all you need is a flat head screwdriver. Simply snap the old drawer glide out, and snap the new one in. Use the flat head screwdriver to pop out a stubborn old drawer glide. The front door glide differs in shape from the rear drawer glide, so ensure you have the correct part prior to installation. This product is sold individually.
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Olivia
July 20, 2017
Do I need to change all of my drawer glides at once, if so how many do I need and are there different ones for the left and right?
Hi Olivia, we recommend changing all 4 of your drawer glides at the same time for an even wear. With that said, you will need 2 front drawer glides 3051162, and 2 rear drawer glides 3051163. Best of luck with this repair!
18 people found this helpful.
Was this helpful?
Thank you for voting!
Sally
September 19, 2017
My drawer glides seem to be fine. I am having a hard time finding the piece that the drawer glides slide on, that are on the inside wall of the stove. They are located at the front of the appliance on the sides (one on each side) where the drawer goes.
For model number 790.95302100
Hi Sally,
Thank you for the question. The lip of the drawer slides on these glides. The Front glide is PartSelect Number: PS434226 and the rear glide is PartSelect Number: PS434227. The glides are attaches to the inside wall where the drawer is installed onto.
Hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Lenard
July 20, 2017
Opening the stove drawer is a task every time, what is my most likely issue and can I fix it myself.
Hello Lenard, if you are experiencing difficulties opening the stove drawer the most common solution would be replacing the rear/front drawer glides. We recommend using a flat blade screwdriver to pop them off before installing your new ones. Part number 3051162 is for your front, and part number 3051163 is for your rear, and do not worry, this should be a very easy repair. I hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Ryan
August 30, 2017
I saw someone asked about how many total slides to replace. And you stated "we recommend changing all 4 of your drawer glides at the same time for an even wear. With that said, you will need 2 front drawer glides 3051162, and 2 rear drawer glides 3051163." if all slides are broken, would you also need an additional 2 front glides on the unit itself for a total of 6? Are their rear glides on the unit as well to need 2 additional 3051163 making my total 8? (4 of each)
For model number FEF336ASC
Hi Ryan,
Thank you for the question. There is a total of 4 glides on the appliance. Two in the front (PS434226) and two in the rear (PS434227).
Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Scarlett
July 20, 2017
Changing the front drawer glides, where do they go and how do I get them out
Hi Scarlett, you will find the front drawer glides on the left and right of the inner side of the door. There should be an opening on the frame where the glides should easily hook in and out of place. To take them out you should use a flat blade screwdriver to snap them off. Please let us know if you have any further questions.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Sharon
September 24, 2017
I've got something stuck behind drawer. Can I get drawer out without breaking glides?
For model number LGE3045KFH
Hi Sharon, Thank you for your question. You should be able to pull the drawer open all the way then lift up a bit on the back to pick then up over the glides and the drawer should come out. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Rose
January 26, 2020
Plastic drawer glides keep breaking on the left side. Seems from the past questions i need 4 parts for the drawer. I would like to replace this range soon, it is almost 20 years old but would like to use it until i need to replace the range. Please advise how i can purchase these plastic drawer glides.
For model number FEF365ASD
Hi Rose, thank you for your question. Two in the front (PS434226) and two in the rear (PS434227). If you are looking to purchase this part then you can do so by searching the part number and then either adding it to your cart and going through the check out process online, or by calling our customer service line and ordering with one of our agents. We hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your Frigidaire Range Front Drawer Glide
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 55 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
drawer glides were broke on front and back
used a screwdriver pushed the old ones out put the new in. the video instructions were great.
Inserted new slide as directed by video. Very easy and video was very helpful.
Jeanette from Alpharetta, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
468 of 470 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rental property stove only had 2 working burners and bottom drawer off track
first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink wrap on wires and used the wire nuts to connect wires together then heated the shrink wrap. I then put screws back in terminal block brackets. I then put the burners on while looking under lid so i would know they were making good connections as this is a bad design from factory. if you pull out burners to clean them and they are not put back in right you dont have a good connection and that causes the terminal blocks to get hot and melt. thats what happened in my case. As far as the drawer glides they just snap into place
Pulled broken one out, slid in the new. Most unbeliveable service I have ever received. Tremndous job, you should sell it to others, Many thanks
Joseph D. from Stuart, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
368 of 374 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom drawer broken
Frst I slid the drawer out.I then pryed the broken drawer glides off with a flat blade screwdriver. The new drawer glides then just snap into place,then reinstall the drawer and check for smooth operation.
This was very simple I just snap the part on no tools required. it took less than 2 seconds.
Tracy from Poulan, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
95 of 157 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drawer glide on bottom stove drawer broke
Snapped the new part into the slot the old one had been in.The repair including opening and closing the drawer took less than a minute.
Homer from Thomaston, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
69 of 130 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic clips were cracked.
It was so easy my wife did it bu snapping in the new clips.
EDWARD from ONSTED, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
67 of 69 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trim Handles Broken during moving
Used a paint spatula to pop upwards the old bottom half of the door handle trim, has metal inserts inbetween pieces. Snapped new ones on. Was initially intimidated, but only took 5 minutes to replace both.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
