This manufacturer-certified drawer support rail supports the right side of the sliding drawer. It is a track that helps the drawer slide open and closed with ease. If you are having trouble opening or closing your fresh food drawer, check the support rails for any blockage, or visible damage. If the rail is damaged, it should be replaced to ensure no further damage is done to the drawer itself. The repair is straightforward: unscrew and remove the existing support rail, then fasten the new rail in place. This genuine OEM replacement part is made of plastic and is white in color. NOTE: This part is sold separately from the left side drawer support rail. The part measures approximately 16 inches long by 1 inch high.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Drawer Support Rail - Right Side
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Crosley.
Part# 240530701 replaces these:
AP2116590, 917558, 240530701, 240460501
Customer Reviews
Average Rating:
★★★★★
★★★★★
141 Reviews
4.5
Filter By Rating:
5 Stars
109
4 Stars
16
3 Stars
5
2 Stars
2
1 Star
9
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brenton B - March 12, 2024
Verified Purchase
worked as expected. Easy to install
Too flimsy.
★★★★★
★★★★★
Rose-Mary S - February 2, 2024
Verified Purchase
Easy Repair
It came fast and installed in a few minutes.
★★★★★
★★★★★
Larry R - December 13, 2023
Verified Purchase
Easy Install, worked as expected
easy fix for a broken drawer :)
★★★★★
★★★★★
James Z - November 10, 2023
Verified Purchase
Perfect match!
Easy repair, once I found out the part was available.
★★★★★
★★★★★
Arthur D - September 20, 2023
Verified Purchase
Super simple, even a 75 year old grandmother could and did do it!
The part came well wrapped and in perfect condition. The instructions were very simple and everything worked as instructed.
★★★★★
★★★★★
Dannene Q - August 30, 2023
Verified Purchase
easy repair, great part. worked perfectly!
The part came fast and was easy to install. Fridge is back in working order. THANK YOU, for your quick service !
★★★★★
★★★★★
Andrea T - July 19, 2023
Verified Purchase
Easy install
This part was easy to install and it came in the mail quickly. There was one screw that had to come out of the old one and enter the new part and my drawer was back in business.
★★★★★
★★★★★
Neal W - June 25, 2023
Verified Purchase
refridge part
part was correct, saved me many dollars as i was selling the house with this fridg and it had to be working.
★★★★★
★★★★★
Louis C - June 14, 2023
Verified Purchase
Right parts
They have the correct fitting parts. No copy cats.
★★★★★
★★★★★
Steven S - June 10, 2023
Verified Purchase
I wish all transactions were this smooth
I broke this rail on my fridge and for almost a month I didn't repair. Going to the local hardware store is ridiculous. Trying to explain the item you're looking for to the clerk is almost impossible. They have no idea what you are asking, and they send you to another guy who, yep...has no idea what you are talking about.
This was so incredibly easy. There's a pic of the part, a brief description and a part #. Imagine that. And it was the correct part. Thank you so much. I am purchasing from you again!!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 62 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Rail broke at the most support place
Took out top shelf, remove old screw and rail . Replace with new
Took out the broken crisper pan cover and replaced it with the new one Took out the support rail frame turned it over unscrewed the support rail and replaced it with the new one. Repair time 5 mins.
The problem was there were no assembly instructions included with the parts or description of hoe to orient the parts.
Once the parts break and fall into the refrigerator you do not know how they were assembled. Being a retired engineer helped me figure out how to replace the parts. You will have to remove the shelf assembly and complete the work outside of the refrigerator.
retainer bar on the door split in the middle, Handle broke and the screws, draw railsnapped
the draw rail: remove upper shelf, unscrew rail. the screw is in the inside of the on the shelf. That's why the top shelf has to come out. door retainer bar lifts straight up fairly easy. upper handle : just remove 2 screws and discard the broken piece. slide handle upward tighten the 2 screws.
The slide rail(Drawer Support Rail) I found was made very cheaply. None the less I had to replace it. I did watch the Repair tutorial on your site that made the repair a snap. Ezpeeze!
Removed the shelf and one screw on the back of the rail. Replaced rail and screw. Re-inserted the drawer and it was done.
Roger from MARKLEYSBURG, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Matching up the mounting screw.
A single screw holds the part in place. The ONLY challenge is seating the new slide so that the screw hole in the glide matches the hole in the support assembly. Initially setting the glide into place mismatched by about 1/16 of an inch toward the back of the refrigerator. Firmly grasping the new part after mating it to the two receive
... Read morers on the support assembly, pull it toward you until it clicks into place. The screw should mate cleanly to the new part without any difficulty. Make sure you get the right or left side part, as they are not interchangeable.
Read less
David from SENECA, SC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken shelf and meat drawer support.
It was pretty self explanatory. The fridge shelf just clicked right into place and a simple screwdriver to replace the drawer support. This made me feel like a boss.
REMOVED STUFF FROM SHELVE AND THEN REMOVED SHELVE AND TURN UPSIDE DOWN REMOVED SCREWW AND REPLACED RAIL AND DRAWERIN TRACKS REINSTALLED SCEW AND RETURNEED TO REFRIGERATOR
Steven from PARRISH, AL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
21 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patrick
July 8, 2019
Right or left? Is this the rail for the side of the drawer on my right or the fridge's right side?
For model number FRT21IL4FW4
Hello Patrick, Thank you for the question. It will be your left or right as you stand in front of the appliance facing it. Hope this helps!
53 people found this helpful.
Was this helpful?
Thank you for voting!
Laura
August 13, 2017
Just wondering if this is for the lunch meat drawer in the center of the fridge, on the left side. Want to make sure its not one of the crisper drawers on the bottom of the fridge.
For model number FRT18G4AWC
Hi Laura,
This is the right side rail for your meat drawer. I have attached the part number for your left side. Good luck with your repair!
I'm looking for the part number for the ride side support for the meat drawer in this refrigerant. The existing one is sagging probably due to us putting too much meat and cheese in the drawer.
For model number FFTR2021QW8A
Hello Dave, thank you for your question. The right side support for the meat drawer is part number Drawer Support Rail - Right Side Part Number: 240530701. Good luck with your repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Victoria
December 12, 2018
Will this right side drawer support rail work for my fridge model number lfht 1817lf1 ?
Hello Victoria, thank you for your question. Yes, this is the correct Right side support rail (right side as you're looking into the unit) for your specific model. Good luck with your repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Carol
April 4, 2019
On my meat tray on top shelf right side rail and tab is broken what do i need to order?
For model number FRT21IL4FW8
Hello Carol, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part #: PS430917. Thank you for your inquiry, good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Natalie
November 4, 2017
Does this part work for my model number? Thank you!
For model number FRT18G4AW
Hi Natalie, Thank you for the question. The rail for the meat pan on your appliance model number is PartSelect Number PS430244.This is the right side rail that supports the smaller meat pan at the top. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Harriet
April 24, 2018
Will the right-side meat drawer support rail that you sell work on my model? Ours is broken. Your list of compatible models does not include the above model number. Thank you!
For model number FRT18IL6JW3
Hi Harriet,
Thank you for your question. Based on the model number you provided, the supports for the meat pan are included with the frame that the drawer slides under. The part number listed under your model number for the Spill Safe Shelf with Glass is PS1991246. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
TK
November 9, 2019
The meat tray falls off the rails is there something missing or broken on it.
For model number MRT18NREW1
Hi TK, it is either the rail or the tray, you will have to inspect the parts to tell. Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Keshia
March 21, 2018
I'm looking for the right side meat hanger will this fit my refrigerator part number fftr1821qw2 thank you
For model number Fftr1821qw2
Hello Keshia, thank you for your question. Yes, the correct right side meat drawer hanger for your model number is part number Drawer Support Rail - Right Side Part Number: 240530701. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Matt
October 24, 2017
Hi, on my refrigerator, there is a center bracket on the shelf that is above the crisper drawer. I don't see that on your diagram. Mine looks like it is not holding up that shelf...it's not connected to the front of the shelf. is there a bracket for that? thanks.
For model number 25361462100
Hi Matt,
Thank you for your question. Unfortunately no, for the shelf that is directly above your crisper drawers, it is all one piece. If you need to replace something on it you would have to replace the entire shelf. I hope that helps. Good luck with your repair.
