Door Closing Cam 240457701

-Analyzed the symptoms, consulted your website
-Found where a clicking sound could be symptomatic of the problem
-Consulted the diagrams of the refrigerator for possible parts
-Ordered the parts listed as probable problem causes
-Received parts in a few days
-Removed door as your website recommended
-Installed upper door bearing as a preventative action as it was OK.
-Installed the lower hinge bearing and door closing cam.
-Lubricated both upper and lower bearings w/ silicone grease.
-Reinstalled fridge door & tested the door closing action
-Worked like a champ and only took about 1/2 hour! Thanks!

My husband researched the possible causes on line and watched some of the videos that were posted on your site. I ordered the 2 parts which did come in 3 business days. My husband and son completed the repair in under 30 minutes. Unscrew the upper hinge assembly on the top right door, lift the door up so that the lower hinge pin is free. Remove the old worn closer plate and hinge bearing. Replace the door, replace upper hinge hardware and check alignment. (It was also a good time to do a thorough cleaning on the coils underneath the refrigerator and check the evaporator pan.)

followed instructions on your video.. PERFECT and easy.

Put a new door bearing and problem solved

I REMOVE THE TOP COVER AND PLATE KEEP DOOR CLOSE TO HOLD IN PLACE THEN LIFT THE DOOR OFF REMOVE THE SCREW IN CLOSER PLATE REPLACE NEW ONE POP OUT BEARING IN DOOR WITH SCREW DRIVE REPLACE THE NEW ONE REINSTALLED DOOR EASY REPAIR.

Followed the instructions using a internet tutorial. No problem.

the repair was so easy to do. it did take 2 of us to handle the door removal and reinstallation. we watched the video and carefully removed the door and had no trouble at all with the new parts installation. we knew what to expect and successfully fixed the frig! Good Deal!! Easy fix!!

Unscrewed tye top door bracket lifted off the door and popped on new bearing takes minutes to do. Takes more time to empty thenshelves beforentaking door off

This site sent me an installation video along with my shipping confirmation details, by email. It was very simple to do after viewing the video.

When my parts arrived I took a screwdriver and removed the hinge cover on the top of the refrigerator door. I then took a 3/8 drive ratchet and a 3/8 socket and removed the 2 screws on top of the fridge that hold the door hinge on( be sure to empty your door before you take the bolts out). I lifted the door out and layed it in the floor and upon inspection I found that the hinge bearing that fits inside the bottom of the door was completely broken off. I had to take a flat screwdriver and dig it out enough to grab it with a pair of pliers and pull it out. I inserted the new bearing and made sure it was all the way in then applied some petroleum jelly around it and the door closing cam. My door closing cam was still good so I didn't have to replace it. I lifted the door and placed it back in the hole on the bottom, closed the door, reinstalled the hinge on top, adjusted the door, tightened the bolts and reinstalled the hinge cover. Piece of cake thanks to the video on the web site!!! I know from now on where to go for parts I need for any of my appliances. Thanks !!!!!