Sold individually. Also known as a short door closing cam.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Hinge Bearing
Troubleshooting
This part fixes the following symptoms:
Clicking sound | Door won’t open or close | Noisy | Door Sweating
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Gibson.
Part# 240328201 replaces these:
AP2115808, 891001, 240328201, 240561601
Customer Reviews
Average Rating:
★★★★★
★★★★★
28 Reviews
4.9
Filter By Rating:
5 Stars
26
4 Stars
1
3 Stars
1
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nathan B - January 27, 2024
Verified Purchase
Both bearings should be provided for the cost
Yes the right door popped when you opened or closed the door. After removing the door it would’ve been nice to replace both bearing at the bottom so they will last longer
★★★★★
★★★★★
Frank H - February 20, 2022
Verified Purchase
Hinge bearing
Perfect part i needed for my fridge Thank You !!!
★★★★★
★★★★★
Kari E - December 30, 2020
Verified Purchase
Perfect easy repair
Part was exactly what we needed. Thank you!
★★★★★
★★★★★
Roger S - October 20, 2020
Verified Purchase
Frigidaire door hinge
The part was great and carefully packed and worked perfectly frige door works nice .
★★★★★
★★★★★
Luisa S - June 22, 2020
Verified Purchase
fast & easy repair
part received as ordered, arrived quickly and easy to install. I checked out install video on your website which showed install step by step first
★★★★★
★★★★★
Denny D - January 14, 2020
Verified Purchase
Part works great.
After taking the door off I wasn't 100 percent sure I ordered the correct part. I had trouble removing the broken cam as it had broken off. I could not find any thing on how to remove the the broken cam. Ended up breaking the part in several pieces with needle nose vise grips.
After old part was removed the new part went in as expect and the door now works as it should.
FYI: Just the service call for this would have been $69.00. So I figured I saved at least $100.
Would order again. Thanks
★★★★★
★★★★★
Randy B - October 4, 2019
Verified Purchase
Perfect fit
The installation video made this a very simple replacement!
★★★★★
★★★★★
Vince S - April 22, 2019
Verified Purchase
right parts
repair completed no problem when you have right stuff
★★★★★
★★★★★
Glenn H - March 28, 2019
Verified Purchase
bearing
great
★★★★★
★★★★★
Deenna K - March 12, 2019
Verified Purchase
Easy repair
Ordered 2 parts to repair fridge door. Video very helpful and repair was easy.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 77 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Refridgerator door would not 'self close' anymore and made a clicking sound
-Analyzed the symptoms, consulted your website -Found where a clicking sound could be symptomatic of the problem -Consulted the diagrams of the refrigerator for possible parts -Ordered the parts listed as probable problem causes -Received parts in a few days -Removed door as your website recommended -Install
... Read moreed upper door bearing as a preventative action as it was OK. -Installed the lower hinge bearing and door closing cam. -Lubricated both upper and lower bearings w/ silicone grease. -Reinstalled fridge door & tested the door closing action -Worked like a champ and only took about 1/2 hour! Thanks!
I started hearing a loud clunking sound when I would close my refrigerator door and then eventually it stopped closing when I pushed it so I had to push it all the way closed. I searched the web site and found the parts I needed then watched a video on how to do the repair.
When my parts arrived I took a screwdriver and removed the hinge cover on the top of the refrigerator door. I then took a 3/8 drive ratchet and a 3/8 socket and removed the 2 screws on top of the fridge that hold the door hinge on( be sure to empty your door before you take the bolts out). I lifted the door out and layed it in the floor a
... Read morend upon inspection I found that the hinge bearing that fits inside the bottom of the door was completely broken off. I had to take a flat screwdriver and dig it out enough to grab it with a pair of pliers and pull it out. I inserted the new bearing and made sure it was all the way in then applied some petroleum jelly around it and the door closing cam. My door closing cam was still good so I didn't have to replace it. I lifted the door and placed it back in the hole on the bottom, closed the door, reinstalled the hinge on top, adjusted the door, tightened the bolts and reinstalled the hinge cover. Piece of cake thanks to the video on the web site!!! I know from now on where to go for parts I need for any of my appliances. Thanks !!!!!
Lower plastic bearings on door started to break off and not allowed to let the door close on its own.
I watched the video on line after identifying the proper parts I needed. When the parts arrived I followed the easy instructions I had watched and proceeded to turn off the unit and remove the items and shelves from the door and then removed the cover plate and two screws from the bracket holding the door in position. Laying the door on
... Read more a blanket I was able to quickly remove the broken part and insert the new plastic bearing in place. I then removed the plastic part on the lower bracket and installed the new piece. The door was easily put back on the refrigerator and was aligned perfectly. Putting shelves and items back in place was still less then the fifteen minutes time.
The refrigerator door made a clunk and dropped slightly when fully opened.
I watched the "how-to" videos on your website, and followed the instructions. It was very easy, took about 10 minutes, and now the door works like new.
The video that parts select provided was a big help. The repair was simple. I spent most of the repair time digging out the old broken bushing from the hole in the bottom of the door. Needle nose helped withthis task.
For a couple months the refrigerator door would not close by itself
Started researching for the part. Watched the video on how to replace bearing. Ordered it and 3 days later the door now works like it should. Thanks to Partselect and the how to video it was easy!
Kathy from Surprise, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken cam on lower refrigerator door hinge
watched the video, ordered the part and handed it to my husband. He quickly removed the hinge cover and took it apart--the lower door bearing was tightened with glue which made it difficult but once that was out of the way, it was remove, assemble and back in business. Thanks for making it "do-able". C and D in New Mexico.
After taking door off, I found the door closure/hinge bearing was broke. I got manual out, looked up part number, googled it, and ordered the part from this website. Couldn't be happier!! My wife is really happy too, such an easy fix
BRIAN from HIGH RIDGE, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door hinge
took door off ,replaced the hinge,and put door back on....
james e from bellport, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Socket set
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
September 19, 2017
Refrigerator door closes approximately three quarters of the way on its own. The last quarter requires light manual effort to complete the closing. Also the door alignment dropped approximately 1/8 inch. What parts need to be replaced.
For model number FRS6R4EW2
Hi Brian,
Thank you for your question. You would have to take a look at your bearings and hinges. Those would be the most likely parts that would be causing an issue like that. Good luck with your repair.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Harry
June 20, 2019
What grease do you use on the door closing cam? Can you please post the name and brand? I cannot seem to find anything. Thanks
For model number FRS3R4EWA
Hi Harry,
Thank you for your question. There is no grease that you would use for the door cams. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
February 5, 2020
Does this part work with fridge model number PLHS280ZAB5?
For model number PLHS280ZAB5
Hello Mike, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS429803. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
