Hinge Bearing 240328201

-Analyzed the symptoms, consulted your website
-Found where a clicking sound could be symptomatic of the problem
-Consulted the diagrams of the refrigerator for possible parts
-Ordered the parts listed as probable problem causes
-Received parts in a few days
-Removed door as your website recommended
-Installed upper door bearing as a preventative action as it was OK.
-Installed the lower hinge bearing and door closing cam.
-Lubricated both upper and lower bearings w/ silicone grease.
-Reinstalled fridge door & tested the door closing action
-Worked like a champ and only took about 1/2 hour! Thanks!

I used your video on how to and worked very well

When my parts arrived I took a screwdriver and removed the hinge cover on the top of the refrigerator door. I then took a 3/8 drive ratchet and a 3/8 socket and removed the 2 screws on top of the fridge that hold the door hinge on( be sure to empty your door before you take the bolts out). I lifted the door out and layed it in the floor and upon inspection I found that the hinge bearing that fits inside the bottom of the door was completely broken off. I had to take a flat screwdriver and dig it out enough to grab it with a pair of pliers and pull it out. I inserted the new bearing and made sure it was all the way in then applied some petroleum jelly around it and the door closing cam. My door closing cam was still good so I didn't have to replace it. I lifted the door and placed it back in the hole on the bottom, closed the door, reinstalled the hinge on top, adjusted the door, tightened the bolts and reinstalled the hinge cover. Piece of cake thanks to the video on the web site!!! I know from now on where to go for parts I need for any of my appliances. Thanks !!!!!

I watched the video on line after identifying the proper parts I needed. When the parts arrived I followed the easy instructions I had watched and proceeded to turn off the unit and remove the items and shelves from the door and then removed the cover plate and two screws from the bracket holding the door in position. Laying the door on a blanket I was able to quickly remove the broken part and insert the new plastic bearing in place. I then removed the plastic part on the lower bracket and installed the new piece. The door was easily put back on the refrigerator and was aligned perfectly. Putting shelves and items back in place was still less then the fifteen minutes time.

I watched the "how-to" videos on your website, and followed the instructions. It was very easy, took about 10 minutes, and now the door works like new.

The video that parts select provided was a big help. The repair was simple. I spent most of the repair time digging out the old broken bushing from the hole in the bottom of the door. Needle nose helped withthis task.

Started researching for the part. Watched the video on how to replace bearing. Ordered it and 3 days later the door now works like it should. Thanks to Partselect and the how to video it was easy!

watched the video, ordered the part and handed it to my husband. He quickly removed the hinge cover and took it apart--the lower door bearing was tightened with glue which made it difficult but once that was out of the way, it was remove, assemble and back in business. Thanks for making it "do-able". C and D in New Mexico.

After taking door off, I found the door closure/hinge bearing was broke. I got manual out, looked up part number, googled it, and ordered the part from this website. Couldn't be happier!! My wife is really happy too, such an easy fix

took door off ,replaced the hinge,and put door back on....