Door Gasket 218730610 | Official Frigidaire Part | Fast Shipping | PartSelect
Door Gasket – Part Number: 218730610
Door Gasket – Part Number: 218730610 Door Gasket – Part Number: 218730610 Door Gasket – Part Number: 218730610 https://partselectcom.azureedge.net/Schematics/Frigidaire/ANBSMRFP.gif

Door Gasket

PartSelect Number PS428571

Manufacturer Part Number 218730610

Manufactured by Frigidaire

Product Description

Door Gasket Specifications

This almond door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Door Sweating | Fridge too warm

This part works with the following products:

Refrigerator.

This part works with the following brands:

Frigidaire, Kelvinator, Gibson, Tappan, Uni, Kenmore.

Part # 218730610 replaces these:

08009735, 08015544, 08017487, 146, 215732403, 215732463, 3001416, 3018238, 5303275772, 5308009735, 5308015544, 5308017487, 53900, 8009735, 8015544, 8017487, AP2115009, G180547-13, G18057-13, G186932-13... Show More
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 4 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Clark from Wenatchee, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Parts Used:
5303276826, 218730610
door seals cracking from age on both compartments
Located the many screws which hold the inside surface of the door on. The screws are located between the seal and the inside surface; you have to hold back the seal to find the screws.

The seals are attached to this inner surface by a snug fit, and clamped in place when the screws are tightened again. Its simpler than it sounds.

Finally, it is wise to get a food safe RTV sealant to glue down the corners of the door seals to make they don't scoot around during the life of the seal.
21 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Christopher from Salisbury, NC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Parts Used:
5303323481, 5303323480, 5303275789, 218730610
The seals on the doors were shot so the refigerader was sweeting.
I started with the freezer door. I lifted the old gasket from the inside edge to get to the hex head screws that attach the plastic inside liner to the outer door. I did not need to start at any one point so I picked a screw and removed it then I worked my way around the door. I was careful to not drop the liner when I removed the last screw. I removed the liner and pulled the old seal out of its seating grove and replaced it with the new seal. Then I used a hair dryer to fix a few places where the seal was deformed from the packing. The heat helped to get the magnetic seal back into the correct shape. I only had one corner to fix the rest of the seal was fine right out of the box. I applyed a little sealer just as the instruction said to do and then reinstalled the linner and new seal. Then I went through the same process for the refrigerator door. Not a hard job just a lot of screws to remove and then put back. The seal its self took about five minutes. Thanks for the parts!

Chris
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Doug from Jonesville, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Parts Used:
218730610
replaced door seal
followed documentation from Frigidaire website.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Laura from Beaver, PA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver
Parts Used:
5303276826, 218730610
Both the Freezer and Refrigerator Seals were defeated.
You lift the old seal and unscrew the nut, being careful not to break the plastic holding the seal down, do not remove the screw the whole way. If you take your time and be methodic it is not difficult, just time consuming. Remove the old seal and start putting the new seal in. I would advise finger tightening the screws every 12 inches or so as you go. Then go back and tighten each side as you complete it.
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Model Cross Reference

This part works with the following models:

PartSelect Number: PS428571
Manufacturer Part Number: 218730610
Brand
Model Number
Description
Kenmore
25368132891
Refrigerator
Kenmore
25368132892
Refrigerator
Kenmore
25368137890
Refrigerator
Kenmore
25368137891
Refrigerator
Kenmore
25368137892
Refrigerator
Kenmore
25369132990
Refrigerator
Kenmore
25369137990
Refrigerator
Kenmore
25377132791
Refrigerator
Kenmore
25377137790
Refrigerator
Kenmore
25377137791
Refrigerator
Kenmore
25378132890
Refrigerator
Kenmore
25378132892
Refrigerator
Kenmore
25378135890
Refrigerator
Kenmore
25378135892
Refrigerator
Kenmore
25378137890
Refrigerator
Kenmore
25378137891
Refrigerator
Kenmore
25378137892
Refrigerator
Kenmore
25379132990
Refrigerator
Kenmore
25379137990
Refrigerator
Kenmore
25379152990
Refrigerator
Kenmore
25379157990
Refrigerator
Kenmore
2539629100
Refrigerator
Kenmore
2539629101
Refrigerator
Kenmore
2539629102
Refrigerator
Kenmore
2539629110
Refrigerator
Kenmore
2539629111
Refrigerator
Kenmore
2539629112
Refrigerator
Kenmore
2539629160
Refrigerator
Kenmore
2539629161
Refrigerator
Kenmore
2539629162
Refrigerator