Part Location Diagram of 218658000 Frigidaire Dual Water Inlet Valve
See part 141 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Dual Water Inlet Valve

Rated by 6 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 58.32
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS428394
Manufacturer Part Number 218658000
Manufactured by Frigidaire
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Product Description

Dual Water Inlet Valve Specifications

This dual water inlet valve is typically located in the back of the refrigerator. It comes with the mounting bracket.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Not dispensing water | Leaking
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Gibson.
Part# 218658000 replaces these:
AP2114865, 12764
Back to Top
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kim
November 18, 2019
Will replacing the water inlet valve correct moldy tasting water. I have replaced the filter several times
For model number frigidaire model FRS22ZRF
PartSelect logo
Hello Kim and thanks for writing. It might help but when you do you should replace the water lines as well. Have you used OEM filters or aftermarket ones? If it is aftermarket ones you can try to purchase an OEM filter. We hope this helps. Please contact us anytime.

Was this helpful?
Thank you for voting!
  • 1
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 6 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
water dispensor inoperative
the system has two dual valves. 1 for water, 1 for ice maker. valve 1 feeds valve 2 via water filter. Voltage to operate both valves was present when water dispensor switch was activated. Both valves are on bottom backside of fridge in opposite corners. Problem was valve plunger was stuck. Tip: valves come apart without removing the entire assmbly. the coil or plunger can be replaced. The nice thing is water lines feeding the valves don't need to be removed if valve problem is one of the aforementioned parts.
Of course make sure water supply to fridge is shut off!
  • robert from Edmonds, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
34 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dispenser had very low flow.
My fridge is over 11 years old and for probably the past few years the water coming out of the dispenser in the door was painfully slow. I tried changing the filter and making sure the debris sceens were not clogged but it didn't help. I was so frustrated I was going to buy a new $3K refrigerator. Instead I found this website, bought both valves that control the water (I didn't know which one was faulty) and replaced them both. I figured $100 repair is an easier pill to swallow than a $3k fridge.

Repair took less than 1/2hr and worked flawlessly. It was very easy, just remove the screws that hold the valves in place and swap them out.

Thanks to the great website and quick service I'm very pleased with my refrigerator and have an extra $2900 in my pocket :-)
Other Parts Used:
Water Valve
  • Joseph from Grosse Pointe Farms, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
26 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no water to the ice maker
since there are two(2) water inlet valves, had a 50/50 chance of getting the right one,since the water dispenser worked ok, by the luck I replaced the wrong one first, with the part I took out I rebuilt the other valve which was the bad one, put the rebuilt valve back in evertthing was good to go. Had water again.
  • william from cherry hill, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
16 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My ice maker quit making ice.
I removed an access panel loosened the two screws that was mounting the water valve to the refer frame. I took off the three lines to the valve and unplugged the wires from it and reinstalled the new valve. The whole job took 5 minutes.
  • Randy from Great Falls, MT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
16 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water going to the ice maker
I replaced the water pressure valve, unplugged the power , turned the water off, took off the back cover, loosened the screws holding the valve on , disconnected the water lines, and replaced with the new valve and reassembled water lines and remounted valve, done.
  • Anson from OAKDALE, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
did not dispense water
Followed instruction given on the computer
  • Kaspor from PHOENIX, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS428394
Manufacturer Part Number: 218658000
Brand
Model Number
Description
Kenmore
25357672790
Refrigerator
Kenmore
25357672791
Refrigerator
Kenmore
25357677790
Refrigerator
Kenmore
25357677791
Refrigerator
Kenmore
25357682790
Refrigerator
Kenmore
25357682791
Refrigerator
Kenmore
25357685790
Refrigerator
Kenmore
25357685791
Refrigerator
Kenmore
25357687790
Refrigerator
Kenmore
25357687791
Refrigerator
Kenmore
25358082890
Refrigerator
Kenmore
25358085890
Refrigerator
Kenmore
25358087890
Refrigerator
Kenmore
25358672890
Refrigerator
Kenmore
25358672891
Refrigerator
Kenmore
25358677890
Refrigerator
Kenmore
25358677891
Refrigerator
Kenmore
25358682890
Refrigerator
Kenmore
25358682891
Refrigerator
Kenmore
25358682892
Refrigerator
Kenmore
25358685890
Refrigerator
Kenmore
25358685891
Refrigerator
Kenmore
25358685892
Refrigerator
Kenmore
25358687890
Refrigerator - SIDE X SIDE REFRIGERATOR
Kenmore
25358687891
Refrigerator
Kenmore
25358687892
Refrigerator
Kenmore
25358689890
Refrigerator
Kenmore
25358689891
Refrigerator
Frigidaire
FRS20ZGFB0
Refrigerator - Side-by-side
Frigidaire
FRS20ZGFD0
Refrigerator - Side-by-side
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service