Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jerry M - September 7, 2021
Verified Purchase
Easy to replace
I guess it only took me about 15 minutes to replace perfect fit
★★★★★
★★★★★
Howard E. K - October 1, 2019
Verified Purchase
Replacing Freezer Door Gasket
The gasket was OEM as advertised. Used a hair dryer to remove the bends and kinks from shipping. Used a flat head screw driver and needle noses pliers to pop out the plastic anchors. Only broke one that was easily repaired with super glue. With my wife's assistance, took less than 30 minutes to remove the old gasket and install the new gaaket.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The freezer door gasket needed to be replaced.
When I received the new gasket I took a blow dryer to it and straightened out the warped areas prior to removing the old gasket. I then looked for a tool to remove the pins holding the gasket in place. I found a butter knife worked the best to get underneath and pry them out. Since this is a chest freezer, the pins in the back of the d
... Read moreoor were very hard to remove and one of them even broke off as I was removing it. Of course I had no spare pins when I went to put the new gasket in place. The new gasket slid right on and the pins snapped into place with a little bit of HARD pressure. My advice is to make sure that you do the back of the door first, since it is hard to line up the holes and the pins otherwise. It would not have been a difficult repair if not for the pins giving me trouble. There are no instructions sent showing how to do any of this work, so if you are not knowledgeable about gaskets this repair could be a difficult one. Maybe the company could include some basic instructions as a help to their customers.
Read less
Patricia from AMERICAN CYN, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed replacement because seal old and inner liner cracking
Very easy and simply. Take old stuff off, let insulation dry out and put all back together with new parts.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bobby
February 20, 2019
I need a replacement gasket. What size is the gasket ps425939/216480801? I tried ordering this before and got a gasket for a large freezer chest.Thanks
For model number MFC05M0BW1 (Kelvinator Chest Freezer)
Hello Bobby, Thank you for contacting us. Per Frigidaire, this gasket measures 26.6" X 21.1". Thank you!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Tonya
July 30, 2021
I need the correct part number when replacing the door gasket, for those plastic pins i need to remove to install the new door gasket
For model number 25316502100, 25316542105,25316342107
Hello Tonya, Thank you for your inquiry. The gasket retainer clips are part# PS457511, for a single clip, and part# PS469567 for a pack of 24. Hope this helps.
Hello Jesse, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2378625. You may also need to replace the Clips that hold the Inner Panel in place. When removing then to replace the gasket, they intend to break, PartSelect Number PS471084. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
