( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Hot Surface Igniter Assembly DG94-00520A

 Fits your NX58H5600SS!
★★★★★
★★★★★
12 Reviews

Rated by 5 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 195.47
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your NX58H5600SS!
PartSelect Number PS4241428
Manufacturer Part Number DG94-00520A
Manufactured by Samsung
Product Description

Hot Surface Igniter Assembly Specifications

This is an oven burner igniter made for use with Samsung ovens. This oven burner igniter is designed to ignite the gas that flows into it, to produce heat. However, over time and with further frequent use or food contamination, this burner can fail and will need to be replaced. If your burner is glowing red or orange, it is functioning as intended, but if your oven does not heat up properly, it likely needs replacement. This oven burner igniter is an OEM part that comes by itself and does not come with any of the screws necessary to secure it inside your oven.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light | Element will not heat
This part works with the following products:
Range, Microwave Oven Combo.
This part works with the following products:
Samsung.
Part# DG94-00520A replaces these:
AP5577941, 114491, DG94-00520A
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
12 Reviews
4.8
Filter By Rating:
  • 5 Stars
    10
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Heating element needed replaced
First we unplugged the oven and shut off the gas. We then began removing the two plates on the floor, inside of the oven, to reveal the pipe with the dead heating element. You remove the screws from the back of the first plate, pop it out from the front, then remove the screws from the front of the second plate and pop it out from the back.
The only issue we encountered was when we attempted to remove the two screws for the pipe: the front screw was stuck (possibly from old oil) and stripped easily. to fix that, we took a metal handsaw, and sawed a new cut into the screw to fit a flathead.
After dealing with the screw, we removed the pipe and unplugged the old heating element. We removed the bottom drawer for extra room to assist with unplugging the heating element, and for removing the pipe from the gas line.
We removed two screws with nuts that were attaching the element to the pipe, and replaced it with the new element.
after reattaching the element and placing the pipe back onto the line, before we placed the plates back, we turned the oven and gas back on to test if it was working. One successful test later, we placed the plates and bottom drawer back and we were done.
  • Danielle from GIG HARBOR, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven igniter burned out
Took out oven racks and bottom steel plates, unscrewed old igniter and replaced with new one, only problem was plastic connections were different so I needed to strip wires and use wire nuts. Very easy fix that anyone could do..
  • Wayne from PLEASANT VLY, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not heating and holding temp
The Samsung stove I have has had the igniter replaced several times. It seems to wear out over a couple years time. I did the repair with a Philips #2 screw driver. Open the oven door, remove the grates. unscrew the bottom cover and expose the heat shield. Unscrew the heat shield. This exposes the burner. Unscrew the burner from the center of the plate/lower heat shield. Unscrew the burner from the front and back of the oven. Carefully lift up the burner to expose the igniter and clip. Unscrew the igniter from the burner and set the burner aside. Unclip the igniter from the power cable. If it falls below, it won't go far just reach in a lift it back up to fasten the new igniter to the power clip. Refasten to the burner with new clips and screws provided. Re-insert the burner to the gas jet that is below the bottom plate which will not be visible to you unless you place your head towards the rear of the stove and look down. Once the Jet is back into the hole of the burner, re fasten it to the middle back and front of the stove. Replace the covers and grates. Close the oven and test it. A new igniter does wonders. You can remove the stove door for a less intrusive install, but I found it unnecessary to do so and saved a step and time. I was done well under 30 minutes.
  • John from EAST QUOGUE, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
13 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't light
1) Remove oven door
2) Remove oven floor with Phillips screwdriver.
3) Remove igniter with screwdriver and wrench
4) Remove bottom burner
5) Install new igniter to burner
6) Replace burner
7) Replace oven floor
8) Replace oven door
9) Test
  • Timothy from WASHINGTON, DC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven igniter burned out needed to replace
With a screwdriver
Other Parts Used:
Burner Control Knob/Dial Hot Surface Igniter Assembly
  • Grace from BETHEL, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

21 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Moke
November 23, 2019
My oven takes forever to reach temp, sometimes it sits at 150 for 20 mins. I can see the igniter glowing and can smell propane.
For model number fx710bgs
PartSelect logo
Hello Moke and thanks for writing. This is usually a defective ignitor, you can try to clean it and see if that helps. If it does not chances are it has become defective and needs to be changed. We hope this helps. Please contact us anytime.

7 people found this helpful.

Was this helpful?
Thank you for voting!
Elton
March 11, 2018
My broiler works but the oven does not. The error code is eo8. Can you help?
For model number FX710BGS
PartSelect logo
Hello Elton, Thanks for your question. E08 means the oven is not heating. You will want to unplug the range and test the oven sensor, broil burner, bake burner, and convection heater. Replace any that do not have electrical continuity. I hope this helps.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Andrew
February 25, 2019
Oven won't light burners fine. I don't see igniter glow. Any ideas
For model number Nx58f5500ssaa
PartSelect logo
Hello Andrew, Thank you for contacting us. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Annette
March 27, 2018
Hi my broil to toast veggies works but oven to bake won't heat and no fire. I was thinking the igniter it just stays black when i turn on oven to back. No glow but when i turn oven on i dont get an erroe code just a solid dot buy the 350° that i don't remember being there before. And no i dont mean the ° degree dot its a •before the digits. Please can u help?? thank u annette
For model number NX58H5600SS
PartSelect logo
Hi Annette, Thank you for your question. Yes, the first part that I would suggest you test is your igniter to make sure that it is working correctly. If it is, you may want to test your temperature sensor next. If that part is fine it may actually be your electronic control board that is the issue. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Janis
April 24, 2018
The preheating in oven never reaches the desired baking temperature. No error code was given. All the top burners work. The broiler works. The fan runs. Just no heat for baking. What could be the cause?
For model number nx58h9500ws
PartSelect logo
Hi Janis, Thank you for the question. I suggest replacing or testing the thermister sensor, PartSelect Number: PS4240743.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Austin
November 22, 2018
Dual oven, upper oven works with the divider in. Broil also works, lower oven does not ignite, manually with a lighter or otherwise. When prompted to preheat the ignitor does not glow either. Suggestions? specs for testing?
For model number NX58J7750SS
PartSelect logo
Hi Austin, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Michael
February 21, 2020
Hi, my oven does not light, i'am testing the igniter for amp's. What should it draw
For model number nx58k9500wg/aa
PartSelect logo
Hi Michael, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board or the spark module. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Norm
February 13, 2020
Heat is coming out but digital temp. Moves up very slowly. Never getting to the desired pre-heat temp.According to dashboard.
For model number FX510BGS
PartSelect logo
Hi Norm, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multi-meter. When testing the sensor with a multi-meter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If this checks out fine, you will need to check the electronic control board, both oven elements and the wiring between these parts to see which once is causing the issue. We hope this helps. Thank you and have a great day.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Nasser
August 11, 2023
What is the part I need for proiler igniter? Is part number ps4241428 is right or not?
For model number Nx58h5600ss/aa-00
PartSelect logo
Hi Nasser, thank you for reaching out. The oven burner igniter, part number PS4241428, you have mentioned is for the broil burner. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jason
November 28, 2018
My oven is very slow to reach the preheat temperature, if it reaches it at all. I had the oven igniter replaced a year and a half ago when this occurred. Could it be the same thing? How can i tell if it needs to be replaced?
For model number NX58H5650WS
PartSelect logo
Hello Jason, Thank you for the question. I suggest testing the Sensor, PartSelect Number PS4240743. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Thank you for your inquiry, good luck with this repair!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
  • 3
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS4241428
Manufacturer Part Number: DG94-00520A
Brand
Model Number
Description
Samsung
FX510BGS
Range - GAS RANGE
Samsung
FX510BGS/XAA-0000
Range
Samsung
FX510BGSXAA
Microwave Oven Combo - Samsung Oven/Microwave Combo Model FX510BGSXAA Parts
Samsung
FX710BGS
Range - GAS RANGE
Samsung
FX710BGS/XAA-0000
Range
Samsung
FX710BGSXAA
Microwave Oven Combo - Samsung Oven/Microwave Combo Model FX710BGSXAA Parts
Samsung
NX583G0VBBB
Range - GAS RANGE
Samsung
NX583G0VBBBAA
Microwave Oven Combo - Samsung Oven/Microwave Combo Model NX583G0VBBBAA Parts
Samsung
NX583G0VBSR
Range - GAS RANGE
Samsung
NX583G0VBSRAC
Microwave Oven Combo - Samsung Oven/Microwave Combo Model NX583G0VBSRAC Parts
Samsung
NX583G0VBWW
Range - GAS RANGE
Samsung
NX583G0VBWWAA
Microwave Oven Combo - Samsung Oven/Microwave Combo Model NX583G0VBWWAA Parts
Samsung
NX58F5300SS
Range - GAS RANGE
Samsung
NX58F5500SB
Range - GAS RANGE
Samsung
NX58F5500SBAA
Microwave Oven Combo - Samsung Oven/Microwave Combo Model NX58F5500SBAA Parts
Samsung
NX58F5500SS
Range - GAS RANGE
Samsung
NX58F5500SSAA
Microwave Oven Combo - Samsung Oven/Microwave Combo Model NX58F5500SSAA Parts
Samsung
NX58F5500SW
Range - GAS RANGE
Samsung
NX58F5500SWAA
Microwave Oven Combo - Samsung Oven/Microwave Combo Model NX58F5500SWAA Parts
Samsung
NX58F5700WS
Range - RANGE
Samsung
NX58H5600SS
Range - Gas Range
Samsung
NX58H5650WS
Range - GAS RANGE
Samsung
NX58H9500WS
Range - GAS RANGE
Samsung
NX58H9950WS
Range - GAS RANGE
Samsung
NX58J5600SG
Range - GAS RANGE
Samsung
NX58J7750SG
Range - GAS RANGE
Samsung
NX58J7750SS
Range - GAS RANGE
Samsung
NX58K3310SB
Range - GAS RANGE
Samsung
NX58K3310SS
Range - GAS RANGE
Samsung
NX58K3310SW
Range - GAS RANGE
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service