Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Patrice B - May 18, 2021
Verified Purchase
Easy repair; works as expected
I received the item quickly. The box was heavily damaged, but luckily the bake element was intact. The installation was quick and easy. Glad I decided to buy the temperature sensor at the same time (as was recommended) because the original sensor also needed to be replaced. I was back to making meals the same night.
★★★★★
★★★★★
Jessica V - September 27, 2018
Verified Purchase
Exactly what we needed!
The part shipped fast and was able to get our oven back up an running within a few minutes of replacing the part.
★★★★★
★★★★★
Christopher B - March 7, 2018
Verified Purchase
EASY FIX
Just installed new baking element in Samsung. Took about 20 minutes, anyone can do it. Old element had a hole burned through in one spot. Working like new again and no labor bill.
★★★★★
★★★★★
Richard J - February 11, 2018
Verified Purchase
Exact part & Fit perfect.
Fast shipping, well packed. works great.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary
December 12, 2018
My oven takes a long time to heat, over an hour to get to 350. Think i need a new element or thermostat. What parts should i order? Thank you
For model number NE684R0ABSR
Hello Mary, Thank you for the question. I suggest testing the Sensor, PartSelect Number PS4240743. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Linda
January 25, 2019
My oven is 5 years old. I turned it on bake 350 degrees the other day and a minute later it was like fireworks and tons of smoke billowing out of the oven. I quickly turned it off and when I opened the oven, a piece of the heating coil that comes out of the back of the oven fell to the bottom. Now the stove top does not work either. Only the clock and light. The replacement part that i see here when I put in the model # is not the same as i have in my oven. This was very scary and is a safety hazard. Any suggestions.
For model number NE595R0ABSR
Hello Linda, Thank you for the question. If the cook top is also not working, I suggest checking the wiring. It sounds like it may have been damaged. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Christopher
May 20, 2019
My oven isn’t heating to temperature. I’m assuming bake element replacement. Yes? No? Something else?
For model number NE594R0ABSR
Hello Christopher, Thank you for the question. I suggest testing the Sensor, PartSelect Number PS4240743. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
Was this helpful?
Thank you for voting!
Christopher
November 25, 2023
Missing wire on 1 side of the bake element
For model number Ne595r0absr
Hello Christopher, Thank you for your inquiry. We confirm that part# PS4240837 is the correct bake element for this model and if you're referring to the wiring harness, the part# is PS4241568. We hope this helps.
Was this helpful?
Thank you for voting!
Hung
March 18, 2018
Error code se . Which part needed to be replace
For model number NE595R0ABSR
Hi Hung, Thank you for the question. The SE Error code indicates a defective key on the control panel. You can try to unplug the appliance from its power source. Open the control panel and make sure that the wire harness is plugged into the electronic control board properly and check the wire harness for damage.If the wire harness is good then replace the control panel.If the problem comes back replace the electronic control board. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
