( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Dual Element Switch

★★★★★
★★★★★
10 Reviews

Rated by 3 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 113.54   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your FE710DRS/XAA-0001!
 Fits your FE710DRS/XAA-0001!
PartSelect Number PS4240803
Manufacturer Part Number DG44-01002A
Manufactured by Samsung
Troubleshooting
This part works with the following products:
Range, Microwave Oven Combo.
This part works with the following products:
Samsung.
Part# DG44-01002A replaces these:
AP4337066
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

21 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken Riley
December 26, 2017
I have two front burners that only run on high heat. They don't regulate the temperature. What part do i need on my Samsung range?
For model number FER300SB
Hello ken, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: Energy regulators-which are the switches for each element, the heating elements (which are listed as heater radiant dual) and the PCB assembly (main control board). You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Peter
March 18, 2018
Both front dual burners are on high on all settings (1-10). The back burners are working fine. Can you help?
For model number FTQ353IWUW/XAA-0000
Hello Peter, Thanks for your question. This is likely due to the infinite switches. You will need two of part number PS4240803 to resolve this issue. I hope this helps.

8 people found this helpful.

Was this helpful?
Thank you for voting!
Juan
May 2, 2018
Both front burners work, but they don't work on "low" setting and instead remain on and produce too much heat. I was thinking it might be the infinite switch but what are the chances that both switches went bad at the same time? Would the main board be the likely culprit in this scenario?
For model number FTQ353IWUX
Hi Juan, Thank you for your question. If the elements are getting to hot the issue is likely the switches. I would check them with a multimeter to verify which one is causing the issue. I would also check the wiring connected to them as well to see there is issue with that as well. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Dan
April 13, 2018
Saying error S.E
For model number FE710DRS
Hi Dan, Thank you for the question. The SE is the error code for a shorted key.Unplug the range. Open the control console and make sure that the wire harness is plugged into the oven electronic control board properly. Check the wire harness for damage. If the wire harness is okay, replace the control panel. If the problem persists, replace the electronic control board. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
KEN
January 23, 2018
Front burner does not come on others work.
For model number FTQ353IWUX
Hello Ken, Thank you for your inquiry. We would recommend checking both the switch regulator part# DG44-01002A and the element itself part# DG47-00022A. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Thomas
April 16, 2019
My hot surface light stays on after using the left front burner.Does not go out after several hours.The surface of the burner does cool down completely,however.Replace the switch?
For model number Ne59j3420sw
Hello Thomas, Thank you for the question. Yes, you will need to replace the switch for the element the light stays on for. The Switch controls both the element and the indicator light. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Maurice
December 19, 2019
The big burners aren't working properly they dont keep accurate heat . But they light up which element switch to order?
For model number Fer300sx
Hi Maurice, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Dan
January 2, 2020
My bake nor broil elements in the oven will not work.
For model number FE710ZDRS/XAA
Hi Dan, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Beth
March 12, 2018
1.The front large burner on the left no longer comes on. Rest of burners ok at the moment. Is the part for this work on either burner side or does each side have a different part #? 2. The digital display is slowly losing bars so the numbers do not fully display. Can this be corrected? 3.The hot light indicator red light sometimes stays on even it the stove is cool and oven not on. Other times it works correctly. How is this fixed?
For model number FCQ321HTUX
Hi Beth, Thank you for your questions. If the burner is not coming on, I would check both the burner and the burner switch to verify which part is causing the issue. If there are bars missing on the display you will need to replace the electronic control board. Also, if one of the indicator light is staying on when the burner is off, you may need to replace it, but I would check each of the burner switches first as they can also cause this issue. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
William
June 6, 2019
I need to know if this part has 9 spade lugs on it as i have 8 wires to connect. If it only has 7 , then this part is no good
For model number fe-r500ww/xac
Hello William, Thank you for the question. This is a 7 spade connection switch. Hope this helps!

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Samsung Range Dual Element Switch

Replacing your Samsung Range Dual Element Switch play video
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 3 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Dual burner only operates on high, no matter the setting
Followed video at the link below.

https://www.bing.com/videos/search?q=how+to+replace+infinity+switch+in+samsung+electric+range&docid=607999620772294704&mid=702E9DF006DF9B180DAA702E9DF006DF9B180DAA&view=detail&FORM=VIRE
  • Jeffrey from Hooksett, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
front burner stayed on high
put in new dual element switch
  • irene from MERIDEN, CT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
You sent me the wrong part 2 times !!!!!!
You sent me the wrong part, and now I am getting the runaround
about sending the part back and to refund my money.
I am very disappointed with the way things are going.
Jared
  • Jared from LAKE OZARK, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.7
Filter By Rating:
  • 5 Stars
    7
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS4240803
Manufacturer Part Number: DG44-01002A
Brand
Model Number
Description
Samsung
FCQ321HSUW
Range - Samsung Range/Stove/Oven Model FCQ321HSUW Parts
Samsung
FCQ321HSUWXAC
Range - Samsung Range/Stove/Oven Model FCQ321HSUWXAC Parts
Samsung
FCQ321HSUX
Range - Samsung Range/Stove/Oven Model FCQ321HSUX/XAA-0000 (FCQ321HSUX/XAA0000, FCQ321HSUX/XAA 0000) Parts
Samsung
FCQ321HTUB
Range - ELECTRIC RANGE
Samsung
FCQ321HTUB/XAA-0000
Range
Samsung
FCQ321HTUBXAA
Range - Samsung Range/Stove/Oven Model FCQ321HTUBXAA Parts
Samsung
FCQ321HTUW
Range - ELECTRIC RANGE
Samsung
FCQ321HTUW/XAA-0000
Range
Samsung
FCQ321HTUWXAA
Range - Samsung Range/Stove/Oven Model FCQ321HTUWXAA Parts
Samsung
FCQ321HTUX
Range - ELECTRIC RANGE
Samsung
FCQ321HTUX/XAA-0000
Range
Samsung
FCQ321HTUXXAA
Range - Samsung Range/Stove/Oven Model FCQ321HTUXXAA Parts
Samsung
FE710DRS
Range - ELECTRIC RANGE
Samsung
FE710DRS/XAA-0001
Range
Samsung
FE710DRSXAA
Microwave Oven Combo - Samsung Oven/Microwave Combo Model FE710DRSXAA Parts
Samsung
FER300SB
Range - RANGE
Samsung
FER300SB/XAA-0000
Range
Samsung
FER300SB/XAB
Range
Samsung
FER300SBXAA
Range - Samsung Range/Stove/Oven Model FER300SBXAA Parts
Samsung
FER300SW
Range - RANGE
Samsung
FER300SW/XAA-0000
Range
Samsung
FER300SW/XAC
Range
Samsung
FER300SWXAA
Range - Samsung Range/Stove/Oven Model FER300SWXAA Parts
Samsung
FER300SX
Range - ELECTRIC RANGE
Samsung
FER300SX/XAA-0000
Range
Samsung
FER300SX/XAC
Range
Samsung
FER300SXXAA
Range - Samsung Range/Stove/Oven Model FER300SXXAA Parts
Samsung
FER400SB
Range - Samsung Range/Stove/Oven Model FER400SB Parts
Samsung
FER400SBXAC
Range - Samsung Range/Stove/Oven Model FER400SBXAC Parts
Samsung
FER400SW
Range - Samsung Range/Stove/Oven Model FER400SW Parts

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service