
Rinse Aid Cap
$
18.66
In Stock



Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS421128
Manufacturer Part Number 154388801
Manufactured by
Frigidaire
Product Description
Rinse Aid Cap Specifications
This is a replacement cap for the detergent/rinse aid dispenser. If the rinse aid cap is damaged or missing, you may notice too much rinse aid in the dishwasher. The cap simply screws into the dispenser, so if your cap is damaged you can simply screw it out, then screw in the new one. The rinse aid cap is approximately 2 inches in diameter and is sold individually. This is an OEM part, directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking | Will not dispense detergent | Not cleaning dishes properly | Not drying dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Westinghouse.
Part# 154388801 replaces these:
AP2109579, 890363, 154388802
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
February 15, 2018
Does this part ( # ) work on all fridgidare dish washers
For model number Don't know

Hello John, thank you for your question. Unfortunately, there are multiple rinse aid caps and some caps are only available by ordering the whole dispenser. To determine the exact replacement part for your appliance we have to have the model number of the appliance itself. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
February 20, 2019
Will the rinse aid cap for my Frigidaire dishwasher shown on your site fit my model?
For model number fdbb4365fc2

Hello Bill, Thank you for contacting us. Upon reviewing the model number provided I show that the rinse aid cap is only available with PS11770680 Detergent Dispenser. PS421128 is not listed as compatible. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Edmund
July 24, 2019
Will this replacement cap fits my dishwasher? It is an Electrolux and the model number is fphd2491kfo. Thanks
For model number FPHD2491KF0

Hi Edmund, Thank you for your question. Unfortunately to replace the cap part you would have to replace the whole dispenser as the cap is not sold separate, PartSelect Number PS11770680. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Eleanor
August 19, 2019
Need cap for rinse dispenser
For model number 66515112K214

Hello Eleanor, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11731731. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Christine Allen
August 19, 2019
The cap melted on my rinse aide dispenser. I don’t want to buy a whole dispenser unit. Is it ok to just not have a cap? I use dishwasher soap with rinse aid in it.
For model number FPHD2491KFO

Hello Christine, thank you for your question. It would be recommended to have the cap present while using the dishwasher. Unfortunately the cap is not sold separate from the Detergent Dispenser, part number PS11770680 on your model.
Was this helpful?
Thank you for voting!
John
February 5, 2020
I need a rinse aid cap can only. I find the unit only
For model number fghd2433kw1

Hello, Thank you for your question. The rinse aid cap is not sold separately. You will need to purchase the whole dispenser to replace that. Thank you for your inquiry.
Was this helpful?
Thank you for voting!
John
February 28, 2019
Will this cap fit my dishwasher?
For model number FFBD2408NB3A

Hi John, Thank you for the question. Unfortunately it looks like the cap is not sold separately from the whole dispenser, PartSelect Number PS11770487. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Thomas
July 3, 2019
Does this part fit with this model? Thank you
For model number FFBD2408NS0A

Hi Thomas, thank you for your question. Unfortunately it looks like the cap is not sold separately from the whole dispenser. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Part Videos
Replacing your Frigidaire Dishwasher Rinse Aid Cap
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 6 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Striker
Removed the 4 screws that held the dishwasher in place, tilted it out, removed 2 nut screws on striker, installed new striker and put it back together. Very simple.
Thank you for stocking the parts and shipping them as promised.
Thank you for stocking the parts and shipping them as promised.
-
Jeffrey from Mildland, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
-
13 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The bottom door gasket and tube gasket were leaking. The rinse aid cap was broken.
I removed the door panel and ran the dishwasher to determine where it was leaking. Ordered the parts. When parts arrived I removed door in order to get at the bottom door gasket, replace it, and removed the tube gasket and replaced it with new parts. The whole job was very easy for a person that's never repaired a dishwasher before. I also found that the return tube gasket at the top of the dishwasher was leaking and repaired that by making a new gasket out of a flat piece of rubber and an o-ring. All leaks have been repaired. With regards to the return tube issue, it may have only been loose and if so, I could have just tightened the return tube outlet and gotten the same results. The people at this site were excellent. Thank You
-
Emory from JENSEN BEACH, FL
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Wrench (Adjustable)
-
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The rinse cap was mutilated, the rinse agent leaked.
Simply unscrewed the old. Replaced with the new.
-
Rose from Summerville, SC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Parts Used:154388801
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The rinse aid cap fell off during the drying session and was warped as a result.
I just had to buy a new cap and screw it in.
-
Jan from DENVER, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Parts Used:154388801
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unable to add rinse aid
Screwed in
-
Jane from GREENFIELD, IN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Parts Used:154388801
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Door Latch
Removed six screws. Disconnected four wires. Reconnected four wires to new latch. Retightened six screws. Easy!!!
-
Gregory from Cincinnati, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
-
0 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Gary K - December 1, 2020

Right Part
Ordering was easy. Part was expeditiously received. Was exactly the right part.
Michel S - June 24, 2020

Just the part I needed
Exactly what I needed to fix my dishwasher. Perfect fit.
Sarah C - December 5, 2018

This was too easy!
The customer service representative who helped me was terrific. She helped me order the correct part, the part arrived quickly, it fit perfectly, and now my dishwasher is washing my dishes! Thank you, PartSelect!
John H - December 4, 2018

part problem
part seems loose
part info did not list whirlpool
my model #WDT710PAHW1 Serial F81115480
please provide correct part no
please respond

December 4, 2018
Hello John, Thank you for the review. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS11755939. Hope this helps, good luck with this repair!
Diane A - August 7, 2018

Great service!
Part was a perfect fit. Thanks!
John M - June 30, 2018

Very easy repair and quick.
Just had to replace old cracked cap with new one. Just unscrew old one and screw in new one.
Louis A - June 30, 2018

worked
As ordered
Maria W - June 15, 2018

Just what I needed!
This was easy! Thank goodness the cap came with the ring to make it a snug fit! Thanks!
Jimmy S - May 29, 2018

Rinse Dispenser replacement cap
The shipment was received just as promised, and it fit perfectly. Saved $15!!
Dennis B - April 19, 2018

Rinse aid cap
The correct part was delivered in the promised time window at a reasonable price.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS421128
Manufacturer Part Number: 154388801
Manufacturer Part Number: 154388801
Brand
Model Number
Description
