This is a door switch assembly designed for Samsung washing machines. This door switch assembly is used to latch and lock the door shut before the washing cycle commences and communicates with the control board when that is done. If your washer door is not locking or latching properly, the door switch is likely bad or broken and will need to be replaced. To replace this assembly, you will need a flat-head and Philips-head screwdriver. This part is a genuine OEM switch assembly and is sold individually, without any wire harnesses or securing screws.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close
This part works with the following products:
Washer.
This part works with the following products:
Samsung, Maytag.
Part# DC64-00519B replaces these:
AP4205355, DC64-00519B
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
James H - October 23, 2021
Verified Purchase
Very easy repair.
The part I needed arrived quickly, and the replacement was very easy and worked perfectly when installed.
★★★★★
★★★★★
Tracy L - October 4, 2020
Verified Purchase
Easy repair
Yes it was a easy repair BUT the door seal and its keeper ring CAN BE A PAIN
★★★★★
★★★★★
Hugh S - February 3, 2018
Verified Purchase
Exactly what I needed.
Great website. The exploded parts view was a big help in finding exactly the part I needed. Will definitely be back when my grandkids slam the door too hard and break the new one I just replaced.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Front loader door would not lock.
Removed the rear top two Phillips screws, pull off top cover. Unscrew two phillips screws that hold the outside front lock trim, unclip (one left of housing) plastic housing. Remove one phillips screw 11 o'clock from housing, about 6" away, with door button above it, which releases the door lock housing from inside the machine. From right
... Read more side (facing machine) look down into left front of machine, you will see a black cover, which does a goid job hiding the white part, but it protects the part from water, I guess. Unclip 3-4 plugs, push spinning loader away to pull out the complete part easily. Swap back covers (a bit annoying to place wiring harness back in such a tight place, and cover on. You can try another method if you have a simpler way, like place the harness onto part first, before plugging in and placing cover. But, I kept dropping the part into the machine, which equals a little pita). Then screw the 11pm screw to hold part and the two other screws (small housing and cover), place remaining 2 screws, and lid. Pretty much undo the above procedure. Done.
Read less
Nadira from JACKSONVILLE, FL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washing would stop in mid cycle and the door would be locked.
An initial issue was getting the door to unlock. I tired several things but finally was able to pull the door as if to open it and put something between the door handle and the front of the washer while I ran a washer cycle. There is a way to take the washer top off and reach down inside the unit and pull down on a release, but I did no
... Read moret try that.
The washer has a rubber boot between the washer frame and the wash tub. There is a metal wire ring that secures the outer edge of the boot to the washer frame. Peel back the outer edge of the boot at the bottom to reveal a metal ring that has its ends connected by a small spring. Use a flat tip screw drive to pry this ring off. Peel back the boot from the washer frame.
Next use a Phillips screw drive to remove the two screws that protrude through the wash frame on the right side of the door.
Reach between the washer tub and the frame and the tub and pull the switch through the opening and the washer tub. You will have to wiggle the switch around to remove it. There are three sets of wires attached to the switch by plugs.
The switch is covered with a plastic protective cover. Remove this. You will have to use a screw driver to release various catches to do this.
Remove the three set of wires. There are catches that secure the wire plugs in place. pry them back with a small screw drive.
Attach the new switch to the sets of wires.
Attach the protective cover to the switch. The wires feed through a small slot toward the bottom of the switch.
Slide the switch through the opening where you removed it. and re-attach it using the two screws.
Put the rubber boot in the channel in the washer frame. Replace the metal ring. This was the most challenging part of the repair for me. I had to play around with this to get it into position. You have to work it around the gasket and stretch out the spring.
By the way, The service was great and exceeded by expectations.
Read less
Arthur from WILLARD, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
19 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John Wolstenholme
January 20, 2018
Serial # y0ic54ab202869z need a door lock "Samsung"
For model number WF41ABP/XA
Hello John, Thank you for your inquiry. We do show part# DC64-00519B is the door lock switch for your model. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Byron
April 2, 2018
In need of a door lock switch, does this one fit?
For model number WF206BNW/AA
Hello Byron, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS4210737. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Anita
May 4, 2018
Samsung washer serial# wf42h5200aw/a2 need a door lock. Which part #?
For model number WF42H5200AW/A2
Hello Anita, thank you for your question. The door lock for your model # WF42H5200AW/A2 is part number WP8182634. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sheilla
January 21, 2019
The lock seems to be stuck and the door will not shut. What lock switch do i need for my model. Also looking for the rubber door boot.
For model number Samsung WF42H5200AF/A2
Hello Sheilla, thank you for your question. The door lock and switch assembly is Door Switch Assembly
Part Number: PS4210737 and the boot seal is Door Boot Seal Part Number: PS9606239. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
April 26, 2019
Does this door lock fit my model number?
For model number WF448AAP/XAA02
Hi Richard, thank you for your question. Yes, this is the part that you are looking for according to your manufacturer and the model number provided. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Chris
January 2, 2020
Need door lock assembly, will this one fit my machine?
For model number Wf218anb/xaa
Hello Chris, thank you for your question. Yes, that is the correct door lock switch assembly for that unit. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ramon
August 23, 2023
Does DC64-00519B Washer Door Lock Switch Assembly fit a General Electric GHDVH670 washing machine?
For model number GHDVH670
Hello Ramon, thank you for your inquiry. According to our research, the part you mentioned is not compatible with your model. The compatible door lock switch is part number PS1021459. Glad to be of help!
Hi
What’s is the part number for door lock switch assembly for this model? thanks!
For model number WF331ANW/XAA-02
Hi Max. We have no records of WF331ANW/XAA-02. For WF331ANW/XAA-04 the correct part is number DC63-00693A. Please verify your model number and if correct contact the manufacturer to double check on the correct switch. Thank you for your question and good luck with your repair.
Was this helpful?
Thank you for voting!
Miriam
February 18, 2020
Our front loader Samsung washer washes but will not spin.We changed the stater load sensor, it does wash but will not spin out.
what other sensor will i need to change?
For model number WF328AAW/XAA02
Hello, Thank you for your question. You may also want to check the pressure sensor- PartSelect Number: PS4218055. If that is functioning you may need to check your motor. We hope this helps.
Was this helpful?
Thank you for voting!
Disa
March 19, 2020
My Samsung washer no longer wants to lock. Everything turns on, just not locking whatsoever to start cycle.. which part(s) am i needing to order, please.. greatly appreciated
For model number WF42H5400AF/A2
Good Day Disa. Thank you for your question in regards to your unit (Model Number WF42H5400AF/A2). Based on our research, you may need to replace the Door Lock Switch (PartSelect Number PS11762120). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
