Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jan J - March 11, 2021
Verified Purchase
Easy repair. Solved the problem.
Part arrived quickly & made for an easy repair. Solved the problem of no hot water coming into the washer.
★★★★★
★★★★★
Sambath S - March 25, 2018
Verified Purchase
Easy repair. Got to specify if it's for hot or cold water inlet.
Great condition but expecting two screws coming with it. Save your old screws.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
16 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marj
December 10, 2017
When starting a new load of laundry, it does not supply water. And I get error message pf. Which part is the water controller?
For model number WF209ANW/XAA
Hi Marj, Thank you for the question. The error PF indicates power failure, meaning electricity has been interrupted to the appliance.Try to press the Pause/Cancel/Stop button twice to clear the error. Next try to start a short cycle to check the operation of the appliance by selecting a cycle and pressing and holding the start button. Next reset the breaker box, unplug the appliance for 5 minutes and make sure the appliance is securely plugged in. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Quentin
January 4, 2018
My machine continues to dump cold water into the tank during the final spin cycle and after the machine shuts off. It is most definitely cold water, and i see that there are 2 water inlet valves on this machine on your diagram. Which one of the two do i need, or should i just replace both?
For model number WF405ATPAWR/AA-0001
Hi Quentin,
Thank you for your question. You will need to check the cold water valve, if cold water is continuously draining into the washer. The part number for it is PS4208704. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Charlene
January 21, 2018
Why does water fill up my machine when it is not in use? Also, when we turn the water off, it stops filling up with water. Also, why is the water is dripping from the front of washer, as if the machine was on, but when we turn the water off, it no longer drips.
For model number Wf448aap/xxa 02
Hi Charlene,
Thank you for your question. If the washing machine is filling up with water when the washer is not in use, the issue is caused by a malfunctioning water inlet valve and it will need to be replaced. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Phillip
May 3, 2018
My Samsung washer is displaying "nf" once it hits the rinse cycle during normal operations. I noticed that its an issue with not filling. I replaced the hoses from the water hooks ups for the house. I noticed there is a leak coming from the top of the washer right above the cold water inlet valve. I think i should replace both valves but I'm not sure.
For model number Wf218anw/xaa
Hi Phillip, Thank you for the question. NF error code means that there is an issue that is preventing your washer from receiving water into the water inlet valve. I suggest replacing the cold valve if it is leaking. If the hot water is not leaking it shoudl be ok. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Marty Leussenkamp
January 31, 2019
A error code of 4e come up when we try to do the wash do i need to replaced water supply value
For model number wf42h5000aw/a2 01
Hi Marty,
Thank you for your question. The 4E error code indicates that the washing machine is detecting that there is a problem with the water supply. This is likely caused by a kinked or blocked water hose. You will need to check the hose and the water supply to the washer to verify the cause. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sharla
February 17, 2018
Hot water will continue to fill tank. Cold water is fine. I believe it might be the water inlet valve. I am confused about which one to get for my washing machine and if this is most likely the cause.
For model number WF218ANB/XAA
Hello Sharla, Thank you for your inquiry. The hot water inlet valve is part# DC62-30314K, and the cold water valve is part# DC62-30312J. You can test them with a multimeter to see if they have continuity. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jerri
November 6, 2019
Was getting 4e code after 4-5 of filling. Before this, i received same code but machine would fill halfway up with water.Replaced the pressure switch and cold inlet valve, same code, just doesnt before draining itself out.
replaced hot water inlet, 4e again...
ps, checked water pressure too, no issue...
next? help please!
thank you
Hello Jerri,
Thank you fro your question. The 4e error code indicates there is problem with the water supply. If you have replaced both water valves and the pressure switch, we suggest checking the entire water line for any blockage or clogging in the tubing itself. If there still isn't any blockage or any physical defects we suggest contacting the manufacturing for more assistance. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Roberto
November 24, 2019
My washer won't stop filling with water. I tried to turn it off and kept pouring water. The only way to stop it was to unplug it. It sprays water in the washer all throughout the entire cycle.
For model number WF448AAW/XAA
Hello Roberto, Thank you for the question. This is normally an indication the Water Valve PartSelect Number PS4208703 will need to be replaced. Hope this helps!
My water on the washer runs the entire time until it is ready to spin down. I’m pretty sure it is the hot water intake because I’m usually pretty low on hot water after it has run. Sometimes when I run the quick cycles the water will not turn off even after I turn the machine off. I have to turn the water off at the wall and then turn on the spin only cycle to finish the cycle.
For model number WF42H5200AW
Hi David,
Thank you for your question. If your washer will not stop filling with water, there are some parts that you will need to check to see which one is causing the issue. You will need to check the water inlet valves, the water level pressure hose and the water level pressure switch. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
My washer has cold water that continues to flow in to it even when it's unplugged what do you suggest
For model number WF42H5000AW/A2
Hello Susan, thank you for your question. We have researched your model and found that the issue is probably with the Water Inlet Valve, part number PS4209100. If that does not take care of the issue, then the problem is most likely to be related to the Water Level Pressure Switch, part number PS4217083. If you require assistance to place an order, please contact customer service. We hope that helps!
