We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Darlene
September 28, 2017
I am looking for a knob on my model #fer231as1... it is item #21 in your control panel diagram. I see the pic on your website of the knob, which is what I need but can you tell me if this part comes with the little metal insert thing on the back side of the knob that connects to the dryer??
For model number FER231AS1
Hi Darlene, Thank you for the great question, Yes this knob comes with the small D shaped clip that fits into the hole on the back of the knob. Good luck with the repair !
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tony
May 5, 2018
Is this part number a two part knob assembly?
For model number FWS645GFS1
Hi Tony,
Thank you for your question. It is not. This part comes like it is pictured above there. If you also need your dial I have listed that part down below for you. I hope that helps. Good luck with your repair.
The timer for this Frigidaire washer model stops working when it reaches the spin cycle. I see the timer is kind of a sealed unit. Can it be repaired or do i need to replace it?
For model number FWS645GFS1
Hi Tony,
Thank you for your question. You would need to replace it. However you may also want to check your lid switch to make sure that it is still working. If your lid switch is not working then when your appliance gets to your spin cycle, it will stop because it thinks that the lid is opened and that is a safety hazard. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Part Videos
Replacing your Frigidaire Dryer Timer Knob
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 39 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Original timer knob broke
I looked in my appliance paperwork, found the model number, keyed it in, located and ordered the knob. It arrived in a few days and voila, pushed new knob on and dryer is back in great working order. Thanks!
Cheri from Cary, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
469 of 472 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer did not work and the knob was broken too
The job was very easy, I just unscrewed the back of the unit (6 screws) and the two screws securing the timer in the front. I then disconnected the timer. All I had to do was reverse the process and I was done. It took less than 15 minutes.
Dryer was missing the grounding ball and making a loud squeal
First I located the two clips holding the top of the machine on and opened the top of the dryer. I then disconnected the two wires on the door switch and removed the two screws holding the front panel on. After removing the front panel, I vacuumed all the loose lint and as far into the lint trap as possible. I then removed the back vent panel and released the drum belt from the pulley. I pulled the drum out of the support bearing. Then I removed two screws holding the drum support bearing, bracket, and grounding ball clip. I replaced the grounding ball and drum support bearing with new parts, (as the drum support bearing was damaged without the grounding ball). Then I reversed the order and put the dryer back together. Overall I felt the job was easy and I'm happy to be able to use a quiet machine again!!!
Remove the two scews that held it in place. Pulled the element out far enough to replace it. I left the old part on so as not to get confused by which wire went where, and just replaced the part. Very easy.
I unplugged the dryer from the wall and removed the back panel to replace the switch. It only had two wires on the switch I pulled then off and placed them on the new switch and put the unit back together and replaced all the knobs with new ones and it looks new again. Thanks to Parts Select.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
ALYSA F - November 30, 2020
Verified Purchase
EZ Install
The part arrived as it was described. I especially appreciated the brief video showing the install. I would have assumed it would go on the same as the old one came off. But, there was a nearly invisible band on the stem that would have caused problems if the video had not showed it, and that it may need to come off. I did as the video described and all went well.
★★★★★
★★★★★
Mary P - September 23, 2020
Verified Purchase
Dryer fixed
The timer knob fit perfectly. No more guessing. Part came in a timely manner.
★★★★★
★★★★★
Sandra G - September 16, 2020
Verified Purchase
Just what was needed and working well.
Fast, correct delivery. It is appreciated that the descriptions are excellent and make it easy to find what is needed,showing front and back is definitely a great way to display parts.
★★★★★
★★★★★
Linda S - August 4, 2020
Verified Purchase
I can use my dryer timer again
After weeks of turning the timer to the particular setting with a plyers, this was wonderful. The knob was an exact replacement part. Thanks so much!
★★★★★
★★★★★
Robert R - June 7, 2020
Verified Purchase
KNOBB REPLACEMENT!
THANK YOU FOR THE PART AS IT WAS JUST EXACTLY WHAT WE NEEDED TO REPLACE THE BROKEN PART!
NEEDED.
SINCERELY
ROBERT RUSCONI
★★★★★
★★★★★
Branden S - May 22, 2020
Verified Purchase
This part works
It sure does
★★★★★
★★★★★
Alicia B - September 18, 2018
Verified Purchase
Dryer knob
The part was easy to find on the site, it arrived fast ,took no time to install and works perfectly.
★★★★★
★★★★★
Leila K - August 23, 2018
Verified Purchase
Prompt delivery of the needed part. Much appreciated.
Part arrived well-wrapped, ready for it’s thirty-second installation.Fit perfectly. Machine began functioning immediately. Great resource. Keep up the good work.
★★★★★
★★★★★
Cynthia Y - August 10, 2018
Verified Purchase
Easy to replace. Worked perfectly.
Even I was able to replace it. I didn't even have to bother my lazy husband to put it on.
★★★★★
★★★★★
Judith J - May 16, 2018
Verified Purchase
Wonderful experience
The inexpensive part arrived quickly, was installed in less than 5 minutes by my husband, and my 23 year old dryer is working perfectly! Thank you.
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS419211
Manufacturer Part Number: 134011703
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
