
Control Knob 131858004
$
43.78
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS418888
Manufacturer Part Number 131858004
Manufactured by
Frigidaire

Check if this fits your product and find model diagrams
Need help finding your model number?
Product Description
Control Knob Specifications
Sold individually. This white knob accepts a D-shaped shaft.

How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Washer Control Knob

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Touchpad does not respond
This part works with the following products:
Washer, Dryer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Westinghouse, Gibson, General Electric.
Part# 131858004 replaces these:
AP2107747, 890121, 131858004, 131141100, 131141101, 131141105, 131141107, 13185800, 131858000, 131858006, 5303210338, 5303211159, 5303319288, 5303319289
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Mark O - October 14, 2018
Verified Purchase
Excellent
The description of the part was exactly what I was looking for. I received it quickly and was very easy to install. Works great!
Freida G - August 15, 2018
Verified Purchase
SO EASY TO REPLACE
Perfect condition and easy to slip on machine
Yasmin K - August 9, 2018
Verified Purchase
Misfit knob
The replacement knob I received does not fit well ! It sticks too far up and is not the same shape as the previous one. I sent all the information requested. Make, Model number etc the part was not the same. I am trying to get by with it but it keeps popping off.
Marzettie S - July 14, 2018
Verified Purchase
Part did not fit dryer
The knob did not fit the dryer properly. The knob did not go on all the way. It left about a half inch gap on the dryer.
Eric K - April 20, 2018
Verified Purchase
Good Part
The part fit perfect.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 9 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The control knob could no longer be attached because the plastic piece that sticks out was broken off.
We replaced the start switch and the knob. Wasn't difficult. Just had to remove the front panel, unscrew and remove the wires from the existing switch, and then put the new one on. The new control knob then popped right on top of the new start switch.
Other Parts Used:
-
Pia from REDWOOD CITY, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both knobs were broken
Ordered knobs on Monday early. Received midday Tuesday! Very fast delivery. Knobs fit perfectly, no tools required.
Other Parts Used:
-
LAURA from MORGAN, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Off/on knob broke
Pushed the new knob into place.
-
Barbra from Mills River, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old selector knob cracked inside could not use the dryer.
removed the old selector knob just pulled it out gently and lined up the new selector knob and gently pushed it into correct alignment. what a breeze.
reasonable prices. saved me $ on a service call, part, and labor. Thank you M
I just feel the postage is way too much for an item that weighs under 1 oz.
reasonable prices. saved me $ on a service call, part, and labor. Thank you M
I just feel the postage is way too much for an item that weighs under 1 oz.
-
Marilyn from Pembroke Pines, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water temperature knob broke
I push the new knob onto the post that fit the knob
-
Michael from Weston, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
knob broke
pulled old knob off. pushed new knob on.
-
Zackary from Fort Collins, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
49 of 64 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
i broke the knobs and couldn't find the parts t the local hardware store.
I popped the knobs on without tools. Easy! I saved $36.00 buying directly from you instead of my local repair man
Other Parts Used:
-
Ricardo from pomona, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
15 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Start Button broke in the unit
I unplugged the dryer from the wall and removed the back panel to replace the switch. It only had two wires on the switch I pulled then off and placed them on the new switch and put the unit back together and replaced all the knobs with new ones and it looks new again. Thanks to Parts Select.
Other Parts Used:
-
Billy from Huntsville, AL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cloths getting stuck between drum and door frame
replaced upper drum gasket(felt) hardest part was removing old gasket(felt) used a wire wheel on a cordless drill and the material came right off job was very easy to complete and got great service from parts select
Other Parts Used:
-
Donald from Monroe, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
1 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gretchen
September 23, 2023
My machine is 20 yrs old. Knob to select water temp. came off and is broken. What kind of knob do I need?
For model number FWS833AS1
Hi Gretchen, thank you for reaching out. The control knob you are looking for is part number PS418888. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tiffany
July 28, 2021
My main dryer dial knob has broke, i’m looking to replace it. Which knob would be a match?
For model number Mex731CAS3
Hello Tiffany, Thank you for your inquiry. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. We hope this helps.
Was this helpful?
Thank you for voting!
Louise
March 8, 2022
Need new control knob, one to select temperature and time for drying. Where can I purchase
For model number FSE/FSG748GF-S1
Hello Louise, thank you for your question. We have researched the model you have provided, and we would suggest the Rotary Knob, part number PS419092, and the Timer Knob, part number PS417308. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
Marcia
March 10, 2023
Hi, I believe it is part #4 that I need for the dryer model# MEX731CFS0. The knob is the one that "says turn to start". Is that correct?
For model number MEX731CFS0
Hello Marcia, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS418888. Thank you for the inquiry!
Was this helpful?
Thank you for voting!
Sharon
October 10, 2023
Hello,
I'm trying to replace my washer and dryer combo start knob.
I have found this part on your website but would like to confirm it is compatible with my model. Here is the link from your website - https://www.partselect.ca/PS418888-Frigidaire-131858004-Control-Knob.htm#ModelCrossReference
Hope to hear from you soon.
For model number MEX731CAS3
Hello Sharon, thank you for getting in touch. The knob you mentioned is a water level selector knob for your model. The dryer timer knob is part number PS755794, and the washer timer knob is part number PS9863559. We hope this information helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS418888
Manufacturer Part Number: 131858004
Manufacturer Part Number: 131858004
Brand
Model Number
Description
