This blower wheel is a genuine OEM replacement part for your dryer. The wheel can become damaged through use of the dryer, especially if the drive motor shaft, which it is attached to, becomes damaged. This repair will require some disassembly of the dryer. Make sure to disconnect the power source and wear appropriate work gloves while conducting this repair.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Gibson.
Part# 131476300 replaces these:
AP2106979, 473, 5303212513
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tracy P - June 17, 2020
Verified Purchase
Saved a bunch of money!
The part came in as expected and worked great. Glad I didn't have to buy a new dryer.
★★★★★
★★★★★
John M - March 21, 2018
Verified Purchase
Easy repair once disassembled.
Direct replacement
★★★★★
★★★★★
A.J. A - January 27, 2018
Verified Purchase
Easy repair-relieved!
Parts were exactly the right, diagrams on website we’re super helpful in finding parts I needed. Quick shipping, and easy repair.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dryer was making terrible clunking noise when running
This is a stacker washer/dryer combination. Took off the back panel of the dryer, but found out the front needed to come off instead,to replace the blower wheel. This took more time than replacing the wheel. Was pretty easy to get to the wheel and replace. The center part had broken so replaced wheel and clamp. The push in fastner was bro
... Read moreke, which held in the lint screen part. Was easy to install this. Dryer sounds as good as it did when it was new. It was very easy to find the correct part and shipping was overnight! Great service.
after removing the panel covering the dryer blower and removing the blower cover, i pulled the old blower wheel off and placed the new whell on carefully lining the flat edge of the wheel hole up with the flat edge on the blower piston, the n i placed the clamp on and put back all the housing covers and panels...and now my dryer runs quie
... Read moret and drys cloths fast....thanks to partselect!!!!
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
November 21, 2017
Hi folks, is this the only part that would need to be replaced on a dryer that does not heat?Everything else, including the Flame, seems to be working fine.
For model number FLXG52RBS7
Hi Michael, Thank you for the question. If the thermostats and fuses on the element housing and blower wheel housing have been tested as well as the element and they have tested to be good you may also want to check the timer. The Timer tells the element when to heat up. If the blower wheel was defective then the appliance would still get hot but the air would not flow through the dryer so it will not dry properly and the appliance may over heat. Hope this helps!
Was this helpful?
Thank you for voting!
Fred
February 13, 2023
Dryer blowing air in lint catcher and humming sound even when the dryer is not running. Is there a fan in the dryer that continuously runs if defective? What parts need replacing? Thanks.
For model number MEX731CFS4
Hi Fred, thank you for the question. According to our research on your model, the issue is probably related to the Blower Wheel, part number PS417911. The blower wheel attaches to the drive motor shaft and blows air through the drum and out through the exhaust vent. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
