Frigidaire/Frigidaire_Thumb/ZTS1DQTU.gif
See part 27 in the diagram
Replacing your Frigidaire Dryer Lint Filter play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Lint Filter

★★★★★
★★★★★
10 Reviews

Rated by 5 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your GEF331AS2 Dryer!
 Fits your GEF331AS2 Dryer!
PartSelect Number PS417841
Manufacturer Part Number 131450300
Manufactured by Frigidaire
Product Description

Lint Filter Specifications

Located at the front of the dryer, this lint filter traps lint and debris from the exhaust air flowing out of the dryer drum. This part measures approximately 12 inches long x 7 inches high, has a plastic frame, and a mesh body to catch debris. If your filter needs cleaning, the dryer cycle will take longer due to a buildup of lint or fabric softener affecting the air flow through the filter. If there is a buildup, try scrubbing the filter with hot water and soap. If the filter is damaged or torn, it should be replaced. Cleaning the lint filter before starting the drying cycle is a great way to ensure your dryer performs properly.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Marks left on clothes | Takes too long to dry
This part works with the following products:
Dryer.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Westinghouse.
Part# 131450300 replaces these:
AP2106905, 484, 131450345
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barbara Lewin
October 8, 2017
This is a Frigidaire dryer. When i type in the model # for this lint filter this is the lint filter that comes up. However down below it only displays electric dryers for this lint filter. I have a gas dryer. The lint filter looks pretty much the same but i am not sure. Can you help me?
For model number FGR341AC1
Hi Barbara, Thank you for your inquiry. This is the lint filter coming up under your model number so this would be the correct one for your appliance. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Rachel
November 9, 2017
Does the lint screen come with the two screws or do I need to order them separately?
For model number AEQ7000ES1
Hi Rachel, Thank you for the question. The lint filter does not require screws. It just slides into the air duct slot. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Dennis
December 4, 2017
I have a front loader gas Frigidaire dryer. I am trying to get the "housing" piece the lint filter slides into.. it has two screws. thanks
For model number AGQB6000ES2
Hi Dennis, Thank you for your question. I have listed that part in a link down below for you. Good luck with you repair.

Was this helpful?
Thank you for voting!
Related Parts:
Part Videos

Replacing your Frigidaire Dryer Lint Filter

Replacing your Frigidaire Dryer Lint Filter play video
Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 5 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
squeeking/ grinding really bad
First I pryed up the top cover then opened the access cover on the rear to remove the belt from the drum. Next I removed the front of the dryer to have access to remove the drum. I then removed the 3 screws that hold the drum to the rear drum bearing assembly and pulled the drum through the front of the dryer. I then removed the bearing and proceded to remove the ground ball and reassembled in reverse steps.
Other Parts Used:
Drum Belt Rear Drum Bearing Kit SPACER-IDLER Cycling Thermostat - 4 Terminal GASKET
  • Patrick from Humble, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
40 of 180 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lint filter bent
Vacuumed lint and inserted new filter.
  • Ellen from Baltimore, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
19 of 223 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lint filter did not fit "squarely" into its place
replaced old filter, only to find that the new one had the same issue. After closer examination, I determined the filter guide that screws into place, which I had removed earlier to clean lint out, did not hold the lint casing correctly. I removed and reinstalled the piece that has the metal moisture sensors, and replaced it, ensure both screws held the lint casing as it should. Now I have two lint filters that fit perfectly! So, if you ever remove the piece wtih the metal sensors, make sure that the lint casing is screwed in correctly when replacing.
  • Jeff from Bethalto, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
18 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My lent screen broke on my dryer
I remove the old lint filter and just put the new one in.
  • Mary from Garland, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint filter was wearing out.
Just replaced the new lint filter with the old lint filter. The part fit perfectly. I did not have a problem.
  • Barbara J. from Lancaster, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.7
Filter By Rating:
  • 5 Stars
    8
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS417841
Manufacturer Part Number: 131450300
Brand
Model Number
Description
Frigidaire
41749012890
Dryer - Residential, Electric
Frigidaire
41749022890
Dryer - Residential, Electric
Kenmore
41759012890
Dryer - Kemore Dryer 41759012890
Frigidaire
41759022890
Dryer - Gas
Kenmore
41764182300
Dryer
Kenmore
41769042990
Dryer
Kenmore
41769042991
Dryer
Kenmore
41769052990
Dryer
Kenmore
41769052991
Dryer
Kenmore
41774182300
Dryer
Kenmore
41774182301
Dryer
Kenmore
41779042900
Dryer - Kenmore Dryer Model 417.79042900 (41779042900, 417 79042900) Parts
Kenmore
41779042990
Dryer
Kenmore
41779042991
Dryer
Kenmore
41779052990
Dryer
Kenmore
41779052991
Dryer
Kenmore
41780032990
Dryer
Kenmore
41780042990
Dryer
Kenmore
41780042991
Dryer
Kenmore
4178005291
Dryer - Kenmore Dryer Model 417.8005291 (4178005291, 417 8005291) Parts
Kenmore
41780052990
Dryer
Kenmore
41780052991
Dryer
Kenmore
41780142000
Dryer
Kenmore
41780412700
Dryer
Kenmore
41781042000
Dryer
Kenmore
41781042001
Dryer
Kenmore
41781052000
Dryer
Kenmore
41781052001
Dryer
Kenmore
41781142000
Dryer
Kenmore
41781142001
Dryer

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service