Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gail
May 9, 2024
the door latch broke, but I cannot figure out what scew driver to use to remove and replace it with. Wierdlooking screws
For model number FWT445GES2
Hello Gail, Thank you for contacting. This type of screw is known as a pan head Phillips screw or combination screw 10-16 x .75. Usually a Philips or Robertson screwdriver can be used to remove it. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tony
February 25, 2019
Tryed to remove hinge screws and stripped them. I used a grabit extractor to remove the screws and now this will not work. Do you have any ideas on what to do next.
Hello Tony, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Tony
February 25, 2019
Stripped the hinge screws while trying to remove them. I used a grabit bit to remove them with no luck do you have any suggestions on what to do next.
For model number Atf6000fs1
Hi Tony,
Thank you for your question. To remove a stripped screw it depends on whether or not it is the head that is stripped or if the threads are stripped. If the head is stripped, you will need to use a rotary tool to grind a slot for a screwdriver. If it is the threads that are stripped, use a pair of end cutters and insert it under the head and then use a screwdriver to turn the screw. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
