This pin acts as a sleeve for the French door spring in a refrigerator. This is a genuine OEM part that is sold individually and works with the spring within the door mullion to seal the door shut. If you need to replace the sleeve, check whether the spring in the door is still intact as well. You will only need to replace one spring sleeve pin per door, as there is only one sleeve on the upper part of the spring. To remove the spring and replace the mullion, do so with a set of needle-nose pliers and lift the lower side of the spring to easily pull it out, then you can replace the sleeve.?
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
Samsung.
Part# DA81-01346A replaces these:
AP4162150
Customer Reviews
Average Rating:
★★★★★
★★★★★
12 Reviews
4.8
Filter By Rating:
5 Stars
10
4 Stars
1
3 Stars
1
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Marguerite L - June 4, 2023
Verified Purchase
Exact part we needed
Received the part quickly.
Was easy to shop for part needed on your website.
Was helpful that you also had a video on there showing exactly how to do the repair.
★★★★★
★★★★★
Samuel M - March 17, 2023
Verified Purchase
Easy Repair great video
Part came in on time installed per directions everything works good.
★★★★★
★★★★★
Colin G - April 25, 2022
Verified Purchase
Exact replacement
The part was perfectly correct and very easy installation with a new spring.
Couldn't be easier!
★★★★★
★★★★★
Ron M - January 20, 2022
Verified Purchase
Slipped the pin in then the spring and the repair worked perfectly.The
The mullion between the Samsung refrigerator doors wasn't working. The spring was found on the floor with one of the legs broken off. I bought 2 springs to be on the safe side but they didn't work. Upon closer inspection the plastic sleeve pin was missing.
Ordered two sleeve pins, inserted one in the channel along with the spring and it worked perfectly.
I now have an extra spring and sleeve pin so I'm good to go..
★★★★★
★★★★★
William W - February 13, 2021
Verified Purchase
easy peasy,lemon squeezy
easy peasy, lemon squeezy
★★★★★
★★★★★
Nick E - February 2, 2021
Verified Purchase
Was what I needed
Fit the description and part number, came quickly. Good stuff.
★★★★★
★★★★★
David L - November 13, 2020
Verified Purchase
Second repair
Double door Samsung refrigerator door flapper sticks open. Spring didn't fix but this little bushing sure fixed it. Works like new
★★★★★
★★★★★
Stuart A - July 28, 2019
Verified Purchase
exactly what I needed
Amazing that a small part like this causes the doors of an expensive refrigerator to close properly! I am not very handy and I would usually call a repairman, but a little spring like this, I was certain even I could replace it, and I did! It was delivered on time and it perfect condition, I would highly recommend!
★★★★★
★★★★★
Fredrick R - July 20, 2019
Verified Purchase
Works great.
I did not actually use this part. I found another spring cheaper and it arrived three days earlier. I kept this one as a backup.
★★★★★
★★★★★
Douglas M - June 24, 2019
Verified Purchase
Door repair flap would stay open
Part worked perfect, Samsung products suck and I hope they go out of business.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 8 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door Mullion Spring on Samsung Frenh Door Refrigerator - BROKEN
Following the YouTube video - referenced in the PartSelect Website - First installed the Spring Pin on the Mullion - Then inserted the top end of the Spring into the SPRING PIN - then while holding the spring in place with a left hand finger - using needle-nose pliers in my right hand I manipulated the other end ( the lower end) of
... Read morethe spring into the receiving hole on the door .. DONE!
Broken Mullion Door spring-mullion remains open and must be manually folded in
Placed new spring pin and new spring in place with pliers-10 seconds tops. HOWEVER!! Your instruction video is INCORRECT. Spring must be placed opposite of video with bent side toward million otherwise million is flipped outward not held closed. Two frustrating days before I figured that out.
This company failed to get me the parts i needed. Wasted my time and caused a loss.
Called someone else. Got the parts elsewhere. Got the fridge back online 3 week longer than it should. got charged for the part then failed to send it. then finally allowed they didn't have the part in stock.
had to replace the spring on the Mullion door . the how to video helped however the demonstration shows putting the spring on in the opposite way that my door calls for, so just I turned the spring around and done, other than that easy as pie. thanks Chris F.
Chris from YORK, SC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower hinge for spring
After purchasing the spring I realized the hinge was the culprit. It has the retainer for the spring as part of it, a small plastic piece that broke off cause the spring to get lost. The hinge replacement was a little more in depth but the video on the hinge is very good and on point.
Michael from Dahlonega, GA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The french door would spring close or open.
I removed the old spring along with the sleeve and inserted the new one in its place. used a small screw driver to remove the sleeve and inserted the sleeve side in first. took 5 minutes..
Left side French Door flap on Samsung refrigerator didn't retract when closing.
OMG seriously! I stopped into my go-to appliance repair shop to ask about what might be needed to repair the problem with my refrigerator door. They said you will need to replace the Mullion Flap piece. Cost would be $250-300 with part, labor and service. I went on line to see if I could handle the repair process myself. I found a How to
... Read more - U Tube video and turns out I only needed to replace a little spring and pin not the whole Mullion Flap. Went to Parts select, ordered the spring and pin and did the repair myself in about 5 minutes. Shipping was $7 so I ended up paying $13 total.
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ian
July 1, 2019
The left door french door stopped closing on its own. On inspection i can see the divider french door spring is missing, do i just need the spring or any other parts please?
For model number RFG238AARS
Hello Ian, thank you for inquiring. The replacement you are looking for on your model is the Door Mullion Spring part PS4163672. You will also want to consider this French Spring Pin part PS4163673 for your model. We hope this helps.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Denise
July 7, 2021
I already received the springs for the door but i didn't realized that i also need the pins which i just ordered but how do i install it? They say that is a little bit more complicated. The one that broke is the upper one. Thank you
For model number Samsung RF268ABRS
Hi Denise,
Thank you for your question. Here is a link to one of our YouTube videos that you may reference on how to install the spring and the pin, https://www.youtube.com/watch?v=UpuXX86iFAU. To remove the pin or sleeve, it should pull out with the spring. If not use a pair of pliers to pull it out. To install the new pin, insert it onto the spring and follow the instructions in the video. We hope this helps! Good luck with the repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Patricia
February 21, 2019
Light keeps going out
Hello Patricia, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pam
May 21, 2019
The spring on the left side of the door is broken . Won't close properly and giving the sound that the door is open. Should I order ps1463672 to replace it ?
For model number RF197ACRS
Hello Pam, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS4163672. Thank you for your inquiry, good luck with this repair!
Hi Jim,
Thank you for your question. It is normal for a little bit of water to drip from the spout when you are finished with it. If there is water in the dispenser tray, this may sometimes drip down If it overflows. If the water is continually dripping, from the dispenser after you have used it, then the issue, may be with the dispenser control, the water line connected to the dispenser or the water inlet valve. We hope this helps! Good luck with the repair!
I need the spring and spring pin for the flap on the door
For model number RF263AEPN
Hello Joe, thank you for writing. The Door spring for the Mullion is PS4163672. We have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Hello Jim, thank you for your question. We have researched your error code and found that the issue is probably with the Evaporator Fan Motor, if that does not take care of the issue, then the problem is most likely to be related to the Condenser Fan Motor, if that does not help then the issue seems to be with the Control Board. We hope this solves your problem!
Was this helpful?
Thank you for voting!
George
September 30, 2023
The mullion (sp) has broken and how can it be replaced?
For model number Rf266aers
Hello George, thank you for getting in touch. According to our research, you may need to replace the complete flipper assembly, part number PS4176676. We have attached a relevant video that may not be of exact model but will help you to replace the part. Good luck with this repair!
