Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Randy
January 5, 2018
My condenser fan seems to be running constantly. Refrigerator and freezer are maintaining set temperature, 2, 38. The fan makes a slight rhythmic chirp. I took of the back, cleaned everything, fan turns easily. Plugged it in, seemed like compressor came on and maybe a minute later the fan came on and the noise returned. I'd gladly buy a new motor and blade, if that could be the problem. I can't find a video that shows changing it on this model Samsung. Looked to be several screws holding the assembly to the fridge and at least. Two holding the motor to the housing. Also how does the fan remove from motor shaft. Thanks, randy sarteschi. 724 224 8999
For model number Rfg293habp
Hello Randy, Thank you for your inquiry. Try checking the blade first to see if it turns easily and not catching on anything. You need a long Philips screwdriver, a flat blade screw driver, a short Philips screwdriver and a pair of needle nose plyers. Remove the access panel in the back with the Philips screwdriver. To replace the condenser fan motor, disconnect the harness plug, remove the drain tube out of the way, and using the smaller Philips screwdriver, take out the screw that holds the condenser motor housing. Slide the housing forward to release it from the clips and take it out. Place the needle nose plyers on the motor shaft to keep it from turning and using the flat blade screwdriver, pry the fan blade off. Remove the harness from the retainer clips and pull the harness back. Remove the Philips screw and using the flat blade screw driver detach the rear cover and lit it up pull out ht motor push on the locking tab and disconnect the harness and remove the grommets. Replace the grommets on both ends of the motor shaft, plug the harness back in the and pull it through the retainer clips and reattach the housing with the screw. Replace the fan blade and make sure it turns freely. Position the motor housing on the base and slide it back in under the clips. Using the small screwdriver, secure it with the Philips screw. Connect the harness plug and reconnect the drain tube. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Steve
January 25, 2020
2-3 months ago the compressor fan stopped. I cleaned the coils which were filthy. The refrigerator quit cooling, the freezer maintained the proper temp. The fan started working but i found the condenser inside the refrigerator was badly iced over. I defrosted and it worked great. Now the compressor is working and temp is holding but ice is coming through the vents inside the fridge again. My guess is this is the condenser fan motor is out. Do you have any thoughts with this information?
For model number RF18HFENBSR
Hi Steve. It could be the defrost heater part number DA47-00424L or thermostat DA47-00301D. Thank you for your question and good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
January 10, 2022
Are the Evap. and the Cond. motors the same? DA-31-00146E? Evap. in Freezer, Condenser in Fridge.
For model number RS275ACBP
Hello John, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS4138373 for the Condenser and Evaporator Fan Motor. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
James
November 15, 2019
Compressor runs but condenser fan and evp fan don't
For model number Rf217 ACBP / XAA
Hi James, clean the fans, if they still not working you may need to replace them. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
