Part Location Diagram of 6602-001655 Samsung Drive Belt
See part NI in the diagram
Replacing your Samsung Dryer Drive Belt
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Drive Belt 6602-001655

 Fits your DV328AGR!
★★★★★
★★★★★
19 Reviews

Rated by 7 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 50.13
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your DV328AGR!
PartSelect Number PS4133825
Manufacturer Part Number 6602-001655
Manufactured by Samsung for Samsung, Amana, Kenmore
Product Description

Drive Belt Specifications

The drum belt attaches to the motor pulley and causes the drum to spin as the motor is rotating. The drum belt is made of black rubber. This is an easy repair and should only take a few minutes. This goes between the drive motor and the dryer drum. The belt may have broken, which will cause the drum to not turn properly. You will need to pull your dryer away from the wall and use your Phillips screwdriver to remove the screws on the back. This is an OEM product, shipped directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Samsung Dryer Drive Belt

Replacing your Samsung Dryer Drive Belt
Troubleshooting
This part fixes the following symptoms:
Noisy | Drum Not Spinning
This part works with the following products:
Dryer.
Part# 6602-001655 replaces these:
AP4373659, 6602-001314, 6602-001655
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
19 Reviews
4.6
Filter By Rating:
  • 5 Stars
    14
  • 4 Stars
    4
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 7 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Original belt broke after nylon tension pulley bearing froze.
Thank you
partselect.com for a much better heavy duty belt than the original. Way over priced, but well worth it. After watching the video & following it step-by-step, I now have a perfectly running dryer. P.S. don't forget to plug back in the (3) wire harnesses. The entire experience was a great feeling of accomplishment. Thanks again partselect.com
  • John m from GRAPEVIEW, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken drum belt
After viewing many instructions on how to replace a broken drum drive belt on UTUBE and the video you sent me the project was completed with no problems and with ease.

However, I did discover large amounts of lint caked to the bottom of the lint screen housing just beyond the filter screen. There was minimal lint on the lint exhaust fan blades and no lint in the exhaust ducts.

I didn't recall seeing any video instructions drawing attention to potential lint issues, it just made good sense to clean the entire system while it was apart . At first I saw no major lint problem.

However, after removing the lint screen and placing a vacuum cleaner wand to the bottom of the lint screen housing (the bottom is not easy to see) my vacuum cleaner hose became clogged three times. I realized there was a major lint issue isolated to this area.

Many of the on line complaints focused on parts not properly fitting their dryer. they had to modify the parts in some way to fit or operate or they had to return them for other parts. Just think of the time wasted and the lack of use of their dryer.

I called and talked to a tech. Gave them my model number and the tech located the correct OEM parts for my dryer. I paid the extra money for OEM parts because I wanted my dryer fixed and restored to service in the least amount of time.

Outside the discovery of the not so obvious lint issue, the repair project was easy and the dryer was restored to full service with minimal down time.

Thanks for all your help and fast delivery service.
Other Parts Used:
Idler Pulley Assembly Drive Belt
  • John from OCEANSIDE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum don’t turn
Follow the video instructions.
  • Orlando from LAWRENCEVILLE, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum stopped turning.
Followed the video on the website and finished it in a short time. Now it works like a new dryer.
  • Dequince Atkinson from PLATTSBURG, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drier did not turn it was not the belt
I still had to take it apart there was a small sock stuck in the fan that blowes the lent out my wife left the lent filter out one time. Your video was a great help. I'm a mechanic and it was easy thanks Anthony Ratto Tulipbike82@aol.com
  • Anthony from FLORAL PARK, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hooking up belt and pully
Followed video and YouTube most was easy.... put the hooking up the belt took time
Other Parts Used:
Idler Pulley Assembly Drive Belt
  • Corrado from YONKERS, NY
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer turned on but the drum did not move when you pressed start even though It started it cycles.
I YouTube it and there’s a step by step process on how to do it, took maybe 30 mins. If I can so can you
  • Christopher from SUGARLOAF, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
25 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

12 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
January 30, 2018
I can't get tension on the belt. I have a new tensioner and belt
PartSelect logo
Hi James, Thank you for your question. You may not be installing the part correctly. The belt is usually installed around the drum first, then you would pinch your belt together near the bottom, lift your idler pulley up and place the ribbed part of the belt around the motor pulley. Then you press your idler pulley down on to the belt to get your tension. I hope that helps. Good luck with your repair.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Rebecca
February 26, 2019
Will turn on but wont start
For model number Dv328aew xaa
PartSelect logo
Hi Rebecca, Thank you for your question. If the dryer will not start, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the dryer door switch, the push-to start switch, the thermal fuse, the electronic control board, the motor and the belt. I hope this helps. Thank you and have a great day!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Rubie
April 12, 2018
My dryer is making a loud squealing noise. Is there a problem with the drive belt? If not, what could it be?
For model number DV42H5000EW
PartSelect logo
Hi Rubie, Thank you for your question. It could be the drive belt. I would also suggest taking a look at your rollers and your bearing as well. It sounds like something has just worn down in your appliance and needs to be replaced out. I hope that helps. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Stuart
August 21, 2019
Hello! I have ordered 2 different belts from amazon that `'supposidly` works with my dryer.. both of them are way to short.. you simply cannot get them over the pulley and the idler has zero slack.. they are too short.. how can i be guaranteed this thing i buy from you is going to fit??
For model number DV219AEW/XAA
PartSelect logo
Hello Stuart and thanks for writing. Yes. Part Number: 6602-001655 is in the list of compatible items for your model. Hope this helps . Please contact us anytime. This Dryer Belt measures 92 inches in total length, has 5 ribs and 4 grooves, and is 5/16" wide. Hope this help. Please contact us anytime.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Carolyn
December 13, 2018
How do I get to the drum rollers
For model number DV400GWHDWR/AA
PartSelect logo
Hello Carolyn, Thank you for the question. Here is a link to a how to video on installing the roller. The appliance may not be %100 the same but will have the same basic steps. Hope this helps! https://www.youtube.com/watch?v=4QIHirXRzpA&t=345s

1 person found this helpful.

Was this helpful?
Thank you for voting!
Carol Aytes
January 16, 2019
I hear a pop and the dryer quit turning. Could this be the belt? It turns on and when you press the start button i hear a click.
For model number DV50K8600EV/A3
PartSelect logo
Hello Carol, thank you for your question. Yes, if you heard a pop and the drum stopped turning but the motor will run when you press start the belt has broken. The belt part number is PartSelect Number PS4133825. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Scott
December 27, 2019
How do you change the belt?
For model number 402.89032012
PartSelect logo
Hello Scott, Thank you for the question. The belt is usually installed around the drum first, then you would pinch your belt together near the bottom, lift your idler pulley up and place the ribbed part of the belt around the motor pulley. Then you press your idler pulley down on to the belt to get your tension. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Daphne
February 28, 2020
Hi.The tension clip had fallen off, and the spring undone. i fixed those, and put the belt on the drum first as you described. then put the belt on the tension ring, and the motor ring. the belt is still too lose. could the belt be stretched out? or is there a third place to hook the belt that i'm not seeing? thanks
For model number DV45H7200EW
PartSelect logo
Hello Daphne, thank you for your question. It does sound like the belt has stretched. This is a common issue. We would recommend replacing the belt. PartSelect Number: PS4133825. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Seth
19 days ago
I'm not sure if I have the right belt for 402-89032012 Kenmore dryer. Can someone please give me the right part to order?
For model number 402
PartSelect logo
Hello Seth, Thank you for reaching out. The Drive Belt listed for this model is PartSelect #: PS4133825. Good luck with the repair!

Was this helpful?
Thank you for voting!
John
April 10, 2018
How do you get belt around drum
For model number dv419agw/xaa
PartSelect logo
Hi John, Thank you for the question. You will need to remove the back panel to the appliance to gain access to the drum to slip the belt around the drum assembly. Hope this helps!

Was this helpful?
Thank you for voting!
  • 1
  • 2
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS4133825
Manufacturer Part Number: 6602-001655
Brand
Model Number
Description
Kenmore
40289032010
Dryer - DRYER
Kenmore
40289032011
Dryer - DRYER
Kenmore
40289032012
Dryer - DRYER
Kenmore
40299032010
Dryer - DRYER
Kenmore
40299032011
Dryer - DRYER
Kenmore
40299032012
Dryer - DRYER
Samsung
59289622
Dryer - Dryer
Samsung
59289653
Dryer - Dryer
Samsung
59289679
Dryer - Dryer
Samsung
59289683
Dryer - Dryer
Samsung
59299622
Dryer - Dryer
Samsung
59299653
Dryer - Dryer
Samsung
DV203AES
Dryer - Samsung Dryer Model DV203AES Parts
Samsung
DV203AESXAC
Dryer - Samsung Dryer Model DV203AESXAC Parts
Samsung
DV203AEW
Dryer - DRYER
Samsung
DV203AEW/XAA-0000
Dryer
Samsung
DV203AEWXAA
Dryer - Samsung Dryer Model DV203AEWXAA Parts
Samsung
DV203AEWXAC
Dryer - Samsung Dryer Model DV203AEWXAC Parts
Samsung
DV203AGS
Dryer - DRYER
Samsung
DV203AGS/XAA-0000
Dryer
Samsung
DV203AGSXAA
Dryer - Samsung Dryer Model DV203AGSXAA Parts
Samsung
DV203AGW
Dryer - DRYER
Samsung
DV203AGW/XAA-0000
Dryer
Samsung
DV203AGWXAA
Dryer - Samsung Dryer Model DV203AGWXAA Parts
Samsung
DV203AGWXAP
Dryer - Samsung Dryer Model DV203AGWXAP Parts
Samsung
DV203AGWXAX
Dryer - Samsung Dryer Model DV203AGWXAX Parts
Samsung
DV206AES
Dryer - DRYER
Samsung
DV206AES/XAA-0000
Dryer
Samsung
DV206AESXAA
Dryer - Samsung Dryer Model DV206AESXAA Parts
Samsung
DV206AESXAC
Dryer - Samsung Dryer Model DV206AESXAC Parts
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service