398587-5-M-Whirlpool-882688 -Wheel Assembly - Kit of 2
Part Location Diagram of 882688 Whirlpool Wheel Assembly - Kit of 2
See part 24 in the diagram
( Grid squares measure 1x1 inch )
398587-1-S-Whirlpool-882688 -Wheel Assembly - Kit of 2 398587-2-S-Whirlpool-882688 -Wheel Assembly - Kit of 2 398587-3-S-Whirlpool-882688 -Wheel Assembly - Kit of 2 Part Location Diagram of 882688 Whirlpool Wheel Assembly - Kit of 2
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Wheel Assembly - Kit of 2 882688

 Fits your 6651350593!
★★★★★
★★★★★
7 Reviews

Rated by 5 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 26.16
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 6651350593!
PartSelect Number PS398587
Manufacturer Part Number 882688
Manufactured by Whirlpool
Product Description

Wheel Assembly - Kit of 2 Specifications

This wheel assembly, or roller assembly, is for a trash compactor. The kit includes two wheels that are approximately 1 inch in diameter each. The wheels allow the trash compactor container to roll in and out of the appliance. You may have to replace the wheel assembly if the container does not roll smoothly. To access the existing wheel kit on your appliance, uninstall appliance from the cabinet, depress foot petal to lift the container off its track, and remove the container from the tracks. This kit is an OEM part sourced from the authentic manufacturer factory.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Drawer is hard to open and or close
This part works with the following products:
Trash Compactor.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Jenn-Air.
Part# 882688 replaces these:
AP3122985, 735282, 11000002, 11000002K, 14212349, 4153788, 4154198, 4163391, 7-49037, 7-76262, 749037, 776262, 882688, Y776262
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.6
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
KENNETH S - August 27, 2022
  Verified Purchase
Parts came, installed and everything is working like new
part was just like the part replaced and same quality.
★★★★★
★★★★★
Ken B - June 19, 2021
  Verified Purchase
Not an easy repair, but the part fit properly, and was good quality. I do not understand why 2 extra wheels were include, and they were not the same quality as the parts ordered ( these were NOT ball bearing wheels)
The parts were good. Quality bearings were just like OEM wheels
★★★★★
★★★★★
Anthony C - December 2, 2020
  Verified Purchase
Fits perfect
Wheels fit perfect on my 30 year old trash compactor.
★★★★★
★★★★★
Rick W - June 12, 2020
  Verified Purchase
Just what I needed
Fixed problem of compacter not rolling out and in smoothly. Relatively easy job.
★★★★★
★★★★★
Robert W D - February 26, 2020
  Verified Purchase
Did not fix issue
These wheels were tough to install since I could not remove the unit from the cabinet to get at the nots. Had to bend a flange for access, but got them installed. However, these new wheels did not solve my sticking problem. Had to place shims under the drawer to slightly raise it so the release finger was pushing at the appropriate location on the front wheel.
★★★★★
★★★★★
Jerry P K - July 11, 2019
  Verified Purchase
Great
Works great
★★★★★
★★★★★
Larry F - December 19, 2018
  Verified Purchase
Right part
Great customer service rep, very helpful staff
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.7 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
One of the roller wheels was worn out
Removed drawer
Pulled out from cabinet
Unplugged power cord
Removed top cover
Removed front panel
Put front on 2x4 block
Unscrewed leveling legs
Used 9/16" socket to remove old rollers
Installed new rollers
installed front panel
installed top panel
Plugged in electric cord
slid back into cabinet
inserted drawer
tested
Works as good as new
Read less
  • Bruce from ROSWELL, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Install NewDrive Gear Kit,( I also added,2 poor nuts and all 4 wheels)
My compactor is quite heavy, I moved it onto the kitchen floor unplugged and removed the cover plate from the bottom exposing the drive gears. The small (pinion ) gear was stripped as well as a section of the drive gear. I followed the video and removed the (fulthy) ram. The interior filth was so great I removed all parts to my garage and spent a lot of time cleaning them especially the ram.By the time my parts arrived, it was all clean and ready to go. I had also found that one of the power nuts was broken and had ordered new wheels and power nuts. Assembly was straight forward and it works like new now,
Read less
Other Parts Used:
Drawer Roller Power Nut Drive Gear Kit Wheel Assembly - Kit of 2
  • Michael from Morgan Hill, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Compactor draw was not opening fully as the wheel bearings had seized
I followed the you tube video instructions provided by customer care. This involved pulling the unit free from the cabinet, removing several screws that held the housing in place, this gave access to the wheel assembly, then I removed the nuts that held the wheel assembly in place. Fitting the new wheel assemblies was easy as was replacing the housing screws. After reinserting the draw and pushing the unit back into the cabinet it worked like new
Read less
  • Andrew from ASHEVILLE, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trash bin would not roll out completely
-Removed the forward sliding rail screws...lifted the rails up several inches to access the wheel assembly...bent back the steel tab to access the nuts holding the wheels to the frame...replaced the wheels and bent back the steel tabs to original position. Trash bin now rolls out completely as before
  • Roger from Grantham, NH
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
roller bearing for trash bin was damaged and would not allow canister to roll
the bearing were the perfect match and instructions helpful. sysem is rolling smoothly
Other Parts Used:
Drawer Roller Wheel Assembly - Kit of 2 Container Spring
  • roberto from keller, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
6 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Drawer Roller
$16.40
$16.40
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS398587
Manufacturer Part Number: 882688
Brand
Model Number
Description
Kenmore
19025
Trash Compactor - Kenmore Trash Compactor Model 19025 (1988) (19025(1988)) Parts
KitchenAid
4KUCC150S0
Trash Compactor
KitchenAid
4KUCC150S1
Trash Compactor
KitchenAid
4KUCC150S2
Trash Compactor
KitchenAid
4KUCC151T0
Trash Compactor
KitchenAid
4KUCC151T1
Trash Compactor
KitchenAid
4KUCC151T4
Trash Compactor
Kenmore
6221338550
Trash Compactor
Kenmore
6221358550
Trash Compactor
Kenmore
6221388550
Trash Compactor
Kenmore
6228369301NZ
Trash Compactor
Kenmore
6228415001NO
Trash Compactor
Kenmore
6228416001GO
Trash Compactor
Kenmore
62284169900
Trash Compactor
Kenmore
6228419001GO
Trash Compactor
Kenmore
62284199910
Trash Compactor
Kenmore
62284199920
Trash Compactor
Kenmore
6651330590
Trash Compactor
Kenmore
6651336580
Trash Compactor
Kenmore
6651336581
Trash Compactor
Kenmore
6651336582
Trash Compactor
Kenmore
6651338550
Trash Compactor
Kenmore
6651338580
Trash Compactor
Kenmore
6651338581
Trash Compactor
Kenmore
6651338582
Trash Compactor
Kenmore
6651339580
Trash Compactor
Kenmore
6651339581
Trash Compactor
Kenmore
6651340590
Trash Compactor
Kenmore
6651340591
Trash Compactor
Kenmore
6651340592
Trash Compactor
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Wheel Assembly - Kit of 2
$ 26.16
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.