Part Location Diagram of 833697 Whirlpool Condenser Fan Motor Kit
See part 17 in the diagram
Replacing your Amana Refrigerator Condenser Fan Motor Kit
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Condenser Fan Motor Kit 833697

 Fits your 19143-0A!
★★★★★
★★★★★
34 Reviews

Rated by 39 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 63.18
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 19143-0A!
PartSelect Number PS395284
Manufacturer Part Number 833697
Manufactured by Whirlpool
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Product Description

Condenser Fan Motor Kit Specifications

This condenser fan motor kit is designed for use with refrigerators. This fan draws air through the condenser coils and over the compressor. It does this with the goal of cooling the warm refrigerant before it enters the evaporator. When your fan or fan motor is not working your refrigerator will not cool properly. This is a 2-Watt, 115 Volt motor that rotates the fan in a counter clockwise direction. This kit includes the hardware needed for installation, and a set of instructions. Before you begin any repair work make sure to unplug your appliance.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Amana Refrigerator Condenser Fan Motor Kit

Replacing your Amana Refrigerator Condenser Fan Motor Kit
Troubleshooting
This part fixes the following symptoms:
Fridge too warm | Freezer section too warm | Noisy | Fridge runs too long
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
Amana, Kenmore, Admiral, Whirlpool.
Part# 833697 replaces these:
AP3120994, 2790, 833697, 0054175, 0055586, 0056804, 0311168, 0312499, 10448601, 10448602, 10448603, 10522101, 10522102, 10522104, 10884501, 10884502, 10884504, 10884506, 10884507, 1101025 ... Show more , 1101026, 1101073, 1101140, 1105656, 1105657, 1107713, 1107714, 1121292, 1129383, 12001314, 14210089, 14211095, 14251476, 14273186, 205943, 205953, 21012-1, 2149963, 2154725, 2154735, 2154798, 2154998, 2162431, 2199155, 237129, 27515-1, 28056-1, 28056-12, 28056-13, 28056-14, 28056-15, 28056-16, 28056-2, 28056-3, 28056-4, 28056-5, 28056-6, 28056-7, 28056-8, 28056-9, 311168, 4343855, 4344273, 46000833697, 482737, 483019, 483079, 483213, 510634, 515272, 515273, 515396, 517322, 517385, 52186-9, 530423, 530760, 531106, 531585, 531594, 544058, 54503-2, 549047, 549048, 549266, 549299, 552919, 553235, 553236, 56804, 604292, 605292, 606289, 606339, 61001016, 61001018, 61001562, 61002038, 67560-1, 67560-10, 67560-2, 67560-3, 67560-4, 67560-5, 67560-7, 67560-8, 68445-1, 68445-3, 68445-6, 68445-7, 68481-1, 68481-2, 68481-3, 68481-4, 69289215, 799397, 80833697, 8118, 8170524, 8170704, 831350, 833518, 833697, 833697VP, 850015, 851445, 851476, 851578, 851618, 851619, 851629, 851630, 851735, 876443, 938077, 938078, 938164, 938271, 938375, 945466, 945566, 945583, 946538, 946539, 946679, 989532, 99989708, A0287801, B0532506, B0540006, B0544605, B0547205, B0551904, B0552001, B0552004, B0552604, B5603501, B5603504, B5646204, B5646301, C36617-1, C3661701, C36618-1, C3661801, C7584001, C87369-1, C8736901, C8766901, C8809801, C8891701, D0709217, D75840-1, D7584001, D7584002, R0150001, R0150002, R0950046, R0950211, R1500-1, UEM1021, WP61002038, Y0054175, Y0055586, Y0056804, Y0311168, Y0312499, Y61001016 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
34 Reviews
4.7
Filter By Rating:
  • 5 Stars
    28
  • 4 Stars
    5
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 3.2 / 5.0, 39 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Freezer and Fridge were not keeping cold enough
I didn't know what the problem was so replaced all 3 parts.
What I think actually fixed the problem is the Cold Control Thermostat that is not listed here. This part accessed by removing the dial control in the front of the Freezer. Part wasn't exactly the same but worked. I looped the sensor toward the front of the dial. Also replaced the Run Capacitor from the the back of the unit (Very Easy). Replaced the Defrost Timer from the Front of the unit (Easy). Now keeping 35-40 degrees in the Fridge and -15-0 in the Freezer. Nice. I plan to replace the Condenser Fan Motor also as it is a bit noisy.
Other Parts Used:
Run Capacitor Defrost Timer Kit - 120V 60Hz
  • Ted from NEDERLAND, CO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor noise while running and clicking when shutting off
The instruction sheet supplied with the new motor described the steps to take very good. Replaced the rubber grommets for the three motor mounts also. A flashlight or light source was needed or was very helpful.
  • Curtis from Sedona, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator stopped cooling due to condenser over-heating
Pull refrigerator out to access back, unplug unit and remove the 3 .25" screws cut the power leads to motor and install new with easy to understand instructions provided with new motor. Plug refrigerator back in and enjoy your cold beverages once more. EASIEST REPAIR EVER.
  • Kevin from COVINGTON, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan was noisy - bearing had failed
It's self-explanatory. The procedure is obvious; it's just a little difficult. The only hard part is attaching the mounting brackets to the fan. If you can't tighten the mounting bolts, loosen them and reposition the brackets. You might end up mispositioning them at first, because they are hard to reach.
  • Karl from Wellesley, MA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cooling fan quit
Ordered new fan motor on line took out old motor and replaced with new one
  • George from Belhaven, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Divider front of fridge hot to touch Condenser fan not working
removed back cover, removed fan motor and replaced with new one. connected new power wires. worked right away
  • John from Holden, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Outer case of freezer was heating up, not making ice (sometimes) turned up thermostat several times (especially freezer)
I got the product very quickly. (thank you) Looked at online instructions that were quite vague. Pulled plug.Removed the holder for the fan motor slid it out to see what I had. Removed the mounting screws (3) and slid the motor an fan blade out. I made a cut between the wires and marked the "top" wire to motor to be sure to spin in right direction. Removing fan blade hold down clamp was NOT explained at all but I noted that the shaft on the motor was threaded, so I used pliars and held the shaft white un-screwing clamp. I cleaned the fan blades with degreaser and scraped edges of opening on holder opening. Make sure to use ALL the NEW parts included with this kit when re-installing. They send them for a reason. When slpicing and connecting wires it is a 50/50 shot if you don't mark before cutting. You can connect and try plugging fridge back for moment and make sure it is blowing OUT. Put everything back together and after turning DOWN the thermostats twice, fridge is back to usual. Ice maker is cranking out ice and outside case is cool to the touch.

Note: This can be a DIRTY job especially with 4 dogs in house. Fir and grease don't mix well
  • John from Greensboro, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
freezer will not freeze or cool the ice box
I have replaced the circuit board, the condenser fan motor but the unit still will not feeze correctly. The bottom of the unit freezes but just barely cools the rest of the freezer and ice box. Have you got any other advice that might help. This is a side by side unit. What else could be the problem. It seems that the fan is not working correctly or it is stuck in defrost mode. The coils where the fan is seem to be icing up but it will not let the fan work. THanks for your help, David Wilson
  • David from Choctaw, OK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
8 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door gasket was very hot which is caused by an overheated expansion line that runs along the area of the door gasket. This was caused by a failed cooling fan motor.
Pulled out the refrigerator and removed the two panels from the rear of the refrigerator. Removed the fan held in by four screws and unplugged the connector. Soldered on the original connector, installed the fan to the motor and re-installed the unit into the refrigerator. Then blew out and vaccumed the condenser coils.
  • James from Howell, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
noisy fridge, perimeter of door heating up
figured out the condenser fan was kaput. Tried WD, worked for several days then gave out completely. Took off back of fridge and trained small fan on compressor while I ordered new condenser fan. The swap was easy, undid the housing bolts, stripped off the connector, reconnected and voila! works perfect.
  • craig from maple grove, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

34 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
September 16, 2017
Lately it wasn't cooling properly. I cleaned the coils which was very dirty and notice the fan wasn't turning. I turned the fan blade and it started turning. It has been working great for about 2 months, today it wasn't cooling properly again and the outsides was real warm. I checked the fan and it wasn't turning, i turned the fan lightly and it started spinning again, what part do i need to check or replace?
For model number whirlpool ET18PKXAW01
PartSelect logo
Hello Scott, thank you for contacting us. That would be a weak fan motor, you would just need to replace that to fix the issue. Good luck with the repair!

33 people found this helpful.

Was this helpful?
Thank you for voting!
Chris
September 1, 2017
My refrigerator is not cooling properly. I can feel the cold air being distributed in the freezer compartment but there is no air coming through the vents in the refrigerator section. The condensor fan seems to be spinning underneath the fridge. Which part would you consider needing to be replaced?
For model number ET22PKXWN10
PartSelect logo
Hi Chris, Thank you for your inquiry. If your refrigerator is not cooling properly, there are a few parts you will need to check. You will need to check the defrost timer, the condenser fan motor kit, the capacitor, the evaporator fan motor kit, the cold control thermostat, the fresh food door gasket, the start relay cover and the light rocker switch. I hope this helps. Thank you and have a great day!

10 people found this helpful.

Was this helpful?
Thank you for voting!
George
September 8, 2017
To determine which direction a motor is turning do i look at the shaft or do i look at the opposite end
PartSelect logo
Hello George, thank you for contacting us. For the fan motor it would spin clockwise. Good luck with the repair!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Chris
August 31, 2017
Freezer is working fine but the refrigerator is too warm. Hovering around 55 degrees. The compressor fan seems to be working. Maybe not working as efficiently?
For model number ET22PKXWN10
PartSelect logo
Hi Chris, Thank you for the question. I suggest checking the Door gasket first. Make sure there are no gaps that could let the warm air leak through. In the evening when the room is dark you can put a flash light in the fridge and see if there is any light coming through once the door is closed. If you see light then the gasket will need to be replaced. If the gasket is fine you can check the Evaporator Fan Motor at the back of the freezer. This part pulls air into the evaporator coils and then disperses the air in a continuous motion throughout the refrigerator and freezer.If this is not working then the cold air is not flowing in to the fridge section as it should. It can get build up of dust and dirt over time and sometimes needs a cleaning so the fan it working properly. Since you are back there it sometimes help to vacuum off the coils! Hope this helps!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Leo
July 8, 2019
How do i trouble shoot a condensor fan?
For model number ARB2117AW
PartSelect logo
Hello Leo, thank you for your question. If your refrigerator isn't keeping as cool as it should and you feel like the fans are running more than they should you could have a freon problem or a condenser fan motor gone bad. A good way to tell if the condenser fan is not working is to check the area when the compressor is running. If the compressor is running but the fan is not, the fan would need to be replaced. I hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Mary Lou Grimsted
November 18, 2017
Our Maytag refrigerator was purchased new some years ago, the ice maker never hooked up, (our mistake) however now, some years later, there is a layer of ice every two weeks at the bottom of the refrigerator that must be hand removed...how can we repair this?
For model number MOD: MBF 2256KEB3
PartSelect logo
Hi Mary, Thank you for your inquiry. Based on what you described, the reason why there may be ice building up on the bottom of the refrigerator is the refrigerator is cycling too often, it's leaking water or there is ice buildup in the freezer. If it is cycling too often then there is probably a build-up of dust on the condenser coils and they will need to be cleaned or the temperature in the refrigerator is set too low. If it is set too low, you will need to adjust the temperature. If you have leaking water in your refrigerator you may have a blocked drain caused by food particles or other debris. Try to flush the drain with warm water through a funnel. The water tubing may also be clogged and you may have to clean it. If there is ice buildup in the freezer, it may be caused by leaving the freezer door open allowing the humidity inside to increase. Try not to leave the freezer door open any longer than it should be. There may also be an issue with the freezer door gasket and you will need to replace it. I hope this helps. Thank you and have a great day!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
August 30, 2019
When the compressor cooling fan is properly installed does it turn counterclock wise?
For model number ET18KKKXAWOO
PartSelect logo
Hello Robert, thank you for your question. Yes, it rotates the fan in a counter clockwise direction. Good luck with your repair!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Rob
December 11, 2019
Fridge not cooling but condenser fan is working and freezer is cold? What to check?
For model number Maytag PBB1951GRW
PartSelect logo
Hello Rob, thank you for your question. There are a few parts we would recommend testing to determine what the issue is. They are Defrost Thermostat Kit Part Number: 12001937, Defrost Timer - 120V 60Hz Part Number: WP67001036, Freezer Evaporator Fan Motor - 115V 60Hz Part Number: WPW10128551, and Defrost Heater Part Number: WP67002135. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Danny
August 7, 2018
My freezer works as it should but the refrigerator section is warm. What do i need to do to fix this?
For model number MTB1954AR
PartSelect logo
Hi Danny, Thank you for your question. If the refrigerator is too warm, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the condenser fan motor, the defrost timer, the evaporator fan motor, the defrost thermostats, the door gasket, the defrost heater and the temperature control assembly. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Lenny
February 6, 2020
Will this fan run quiet? The existing one is very loud.
For model number 9502186252 BX22A2L
PartSelect logo
Hello Lenny, Thank you for the question. This is a OEM part and will run the same as the original. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Model Cross Reference
This part works with the following models:
PartSelect Number: PS395284
Manufacturer Part Number: 833697
Brand
Model Number
Description
Kenmore
106106-8130600
Refrigerator
Kenmore
106106-8130610
Refrigerator
Kenmore
106106-8130620
Refrigerator
Kenmore
106106-8130630
Refrigerator
Kenmore
106106-8130640
Refrigerator
Kenmore
106106-8130650
Refrigerator
Kenmore
106106-8130660
Refrigerator
Kenmore
106106-8130680
Refrigerator
Kenmore
106106-8130690
Refrigerator
Kenmore
1061068130670
Refrigerator
Kenmore
10650202990
Refrigerator
Kenmore
10650202991
Refrigerator
Kenmore
10650202992
Refrigerator
Kenmore
10650202993
Refrigerator
Kenmore
10650203990
Refrigerator
Kenmore
10650203991
Refrigerator
Kenmore
10650203993
Refrigerator
Kenmore
10650204990
Refrigerator
Kenmore
10650204991
Refrigerator
Kenmore
10650209990
Refrigerator
Kenmore
10650209991
Refrigerator
Kenmore
10650257000
Refrigerator
Kenmore
10650257001
Refrigerator
Kenmore
10650259001
Refrigerator
Kenmore
10650262990
Refrigerator
Kenmore
10650262992
Refrigerator
Kenmore
10650264990
Refrigerator
Kenmore
10650264992
Refrigerator
Kenmore
10650267990
Refrigerator
Kenmore
10650267991
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service